[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20191223054855.3020665-3-bjorn.andersson@linaro.org>
Date: Sun, 22 Dec 2019 21:48:55 -0800
From: Bjorn Andersson <bjorn.andersson@...aro.org>
To: Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>
Cc: Kalle Valo <kvalo@...eaurora.org>,
"David S. Miller" <davem@...emloft.net>,
Andy Gross <agross@...nel.org>, linux-wireless@...r.kernel.org,
netdev@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-arm-msm@...r.kernel.org,
ath10k@...ts.infradead.org
Subject: [PATCH 2/2] arm64: dts: qcom: sm8150: Specify qdss clock for wifi
The WiFi firmware on SM8150 requires the QDSS clock to be ticking, so
specify this clock for the wifi node.
Signed-off-by: Bjorn Andersson <bjorn.andersson@...aro.org>
---
arch/arm64/boot/dts/qcom/sm8150.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi
index 373fa098ebb2..0f0c9db3d484 100644
--- a/arch/arm64/boot/dts/qcom/sm8150.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi
@@ -929,8 +929,8 @@ wifi: wifi@...00000 {
reg = <0 0x18800000 0 0x800000>;
reg-names = "membase";
memory-region = <&wlan_mem>;
- clock-names = "cxo_ref_clk_pin";
- clocks = <&rpmhcc RPMH_RF_CLK2>;
+ clock-names = "cxo_ref_clk_pin", "qdss";
+ clocks = <&rpmhcc RPMH_RF_CLK2>, <&aoss_qmp>;
interrupts = <GIC_SPI 414 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 415 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>,
--
2.24.0
Powered by blists - more mailing lists