netdev - [PATCH net 5/6] s390/qeth: vnicc Fix init to default

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20191223140326.16488-6-jwi@linux.ibm.com>
Date:   Mon, 23 Dec 2019 15:03:25 +0100
From:   Julian Wiedmann <jwi@...ux.ibm.com>
To:     David Miller <davem@...emloft.net>
Cc:     <netdev@...r.kernel.org>, <linux-s390@...r.kernel.org>,
        Heiko Carstens <heiko.carstens@...ibm.com>,
        Stefan Raspl <raspl@...ux.ibm.com>,
        Ursula Braun <ubraun@...ux.ibm.com>,
        Alexandra Winter <wintera@...ux.ibm.com>,
        Julian Wiedmann <jwi@...ux.ibm.com>
Subject: [PATCH net 5/6] s390/qeth: vnicc Fix init to default

From: Alexandra Winter <wintera@...ux.ibm.com>

During vnicc_init wanted_char should be compared to cur_char and not
to QETH_VNICC_DEFAULT. Without this patch there is no way to enforce
the default values as desired values.

Note, that it is expected, that a card comes online with default values.
This patch was tested with private card firmware.

Fixes: caa1f0b10d18 ("s390/qeth: add VNICC enable/disable support")
Signed-off-by: Alexandra Winter <wintera@...ux.ibm.com>
Signed-off-by: Julian Wiedmann <jwi@...ux.ibm.com>
---
 drivers/s390/net/qeth_l2_main.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/s390/net/qeth_l2_main.c b/drivers/s390/net/qeth_l2_main.c
index 8024a2112a87..47d37e75dda6 100644
--- a/drivers/s390/net/qeth_l2_main.c
+++ b/drivers/s390/net/qeth_l2_main.c
@@ -2039,7 +2039,9 @@ static void qeth_l2_vnicc_init(struct qeth_card *card)
 	/* enforce assumed default values and recover settings, if changed  */
 	error |= qeth_l2_vnicc_recover_timeout(card, QETH_VNICC_LEARNING,
 					       timeout);
-	chars_tmp = card->options.vnicc.wanted_chars ^ QETH_VNICC_DEFAULT;
+	/* Change chars, if necessary  */
+	chars_tmp = card->options.vnicc.wanted_chars ^
+		    card->options.vnicc.cur_chars;
 	chars_len = sizeof(card->options.vnicc.wanted_chars) * BITS_PER_BYTE;
 	for_each_set_bit(i, &chars_tmp, chars_len) {
 		vnicc = BIT(i);
-- 
2.17.1