[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20191227213626.4404-3-olteanv@gmail.com>
Date: Fri, 27 Dec 2019 23:36:17 +0200
From: Vladimir Oltean <olteanv@...il.com>
To: davem@...emloft.net, jakub.kicinski@...ronome.com,
linux@...linux.org.uk, andrew@...n.ch, f.fainelli@...il.com,
vivien.didelot@...il.com
Cc: alexandru.marginean@....com, claudiu.manoil@....com,
xiaoliang.yang_1@....com, yangbo.lu@....com,
netdev@...r.kernel.org, alexandre.belloni@...tlin.com,
horatiu.vultur@...rochip.com, UNGLinuxDriver@...rochip.com,
Vladimir Oltean <vladimir.oltean@....com>
Subject: [PATCH v3 net-next 02/11] net: phylink: make QSGMII a valid PHY mode for in-band AN
From: Vladimir Oltean <vladimir.oltean@....com>
QSGMII is a SerDes protocol clocked at 5 Gbaud (4 times higher than
SGMII which is clocked at 1.25 Gbaud), with the same 8b/10b encoding and
some extra symbols for synchronization. Logically it offers 4 SGMII
interfaces multiplexed onto the same physical lanes. Each MAC PCS has
its own in-band AN process with the system side of the QSGMII PHY, which
is identical to the regular SGMII AN process.
So allow QSGMII as a valid in-band AN mode, since it is no different
from software perspective from regular SGMII.
Signed-off-by: Vladimir Oltean <vladimir.oltean@....com>
---
Changes in v3:
- None.
drivers/net/phy/phylink.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c
index ba9468cc8e13..c19cbcf183e6 100644
--- a/drivers/net/phy/phylink.c
+++ b/drivers/net/phy/phylink.c
@@ -281,6 +281,7 @@ static int phylink_parse_mode(struct phylink *pl, struct fwnode_handle *fwnode)
switch (pl->link_config.interface) {
case PHY_INTERFACE_MODE_SGMII:
+ case PHY_INTERFACE_MODE_QSGMII:
phylink_set(pl->supported, 10baseT_Half);
phylink_set(pl->supported, 10baseT_Full);
phylink_set(pl->supported, 100baseT_Half);
--
2.17.1
Powered by blists - more mailing lists