[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20200103175508.32176-1-snelson@pensando.io>
Date: Fri, 3 Jan 2020 09:55:06 -0800
From: Shannon Nelson <snelson@...sando.io>
To: netdev@...r.kernel.org, davem@...emloft.net
Cc: parav@...lanox.com, Shannon Nelson <snelson@...sando.io>
Subject: [PATCH v4 net-next 0/2] ionic: add sriov support
Set up the basic support for enabling SR-IOV devices in the
ionic driver. Since most of the management work happens in
the NIC firmware, the driver becomes mostly a pass-through
for the network stack commands that want to control and
configure the VFs.
v4: changed "vf too big" checks to use pci_num_vf()
changed from vf[] array of pointers of individually allocated
vf structs to single allocated vfs[] array of vf structs
added clean up of vfs[] on probe fail
added setup for vf stats dma
v3: added check in probe for pre-existing VFs
split out the alloc and dealloc of vf structs to better deal
with pre-existing VFs (left enabled on remove)
restored the checks for vf too big because of a potential
case where VFs are already enabled but driver failed to
alloc the vf structs
v2: use pci_num_vf() and kcalloc()
remove checks for vf too big
add locking for the VF operations
disable VFs in ionic_remove() if they are still running
Shannon Nelson (2):
ionic: ionic_if bits for sr-iov support
ionic: support sr-iov operations
drivers/net/ethernet/pensando/ionic/ionic.h | 17 +-
.../ethernet/pensando/ionic/ionic_bus_pci.c | 113 ++++++++
.../net/ethernet/pensando/ionic/ionic_dev.c | 58 ++++
.../net/ethernet/pensando/ionic/ionic_dev.h | 7 +
.../net/ethernet/pensando/ionic/ionic_if.h | 97 +++++++
.../net/ethernet/pensando/ionic/ionic_lif.c | 247 +++++++++++++++++-
.../net/ethernet/pensando/ionic/ionic_main.c | 4 +
7 files changed, 535 insertions(+), 8 deletions(-)
--
2.17.1
Powered by blists - more mailing lists