| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <E1inTn1-0001TI-4W@rmk-PC.armlinux.org.uk>
Date: Fri, 03 Jan 2020 20:43:23 +0000
From: Russell King <rmk+kernel@...linux.org.uk>
To: Andrew Lunn <andrew@...n.ch>,
Florian Fainelli <f.fainelli@...il.com>,
Heiner Kallweit <hkallweit1@...il.com>
Cc: "David S. Miller" <davem@...emloft.net>,
Jonathan Corbet <corbet@....net>,
Kishon Vijay Abraham I <kishon@...com>,
linux-doc@...r.kernel.org, netdev@...r.kernel.org
Subject: [PATCH net-next v2 2/2] net: switch to using
PHY_INTERFACE_MODE_10GBASER rather than 10GKR
Switch network drivers, phy drivers, and SFP/phylink over to use the
more correct 10GBASE-R, rather than 10GBASE-KR. 10GBASE-KR is backplane
ethernet, which is 10GBASE-R with autonegotiation on top, which our
current usage on the affected platforms does not have.
The only remaining user of PHY_INTERFACE_MODE_10GKR is the Aquantia
PHY, which has a separate mode for 10GBASE-KR.
For Marvell mvpp2, we detect 10GBASE-KR, and rewrite it to 10GBASE-R
for compatibility with existing DT - this is the only network driver
at present that makes use of PHY_INTERFACE_MODE_10GKR.
Signed-off-by: Russell King <rmk+kernel@...linux.org.uk>
---
.../net/ethernet/marvell/mvpp2/mvpp2_main.c | 19 +++++++++++++-----
drivers/net/phy/aquantia_main.c | 7 +++++--
drivers/net/phy/bcm84881.c | 4 ++--
drivers/net/phy/marvell10g.c | 11 +++++-----
drivers/net/phy/phylink.c | 1 +
drivers/net/phy/sfp-bus.c | 2 +-
drivers/phy/marvell/phy-mvebu-cp110-comphy.c | 20 +++++++++----------
7 files changed, 39 insertions(+), 25 deletions(-)
diff --git a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
index cd32c7196a7f..72133cbe55d4 100644
--- a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
+++ b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
@@ -1114,7 +1114,7 @@ mvpp2_shared_interrupt_mask_unmask(struct mvpp2_port *port, bool mask)
/* Port configuration routines */
static bool mvpp2_is_xlg(phy_interface_t interface)
{
- return interface == PHY_INTERFACE_MODE_10GKR ||
+ return interface == PHY_INTERFACE_MODE_10GBASER ||
interface == PHY_INTERFACE_MODE_XAUI;
}
@@ -1200,7 +1200,7 @@ static int mvpp22_gop_init(struct mvpp2_port *port)
case PHY_INTERFACE_MODE_2500BASEX:
mvpp22_gop_init_sgmii(port);
break;
- case PHY_INTERFACE_MODE_10GKR:
+ case PHY_INTERFACE_MODE_10GBASER:
if (port->gop_id != 0)
goto invalid_conf;
mvpp22_gop_init_10gkr(port);
@@ -1649,7 +1649,7 @@ static void mvpp22_pcs_reset_deassert(struct mvpp2_port *port)
xpcs = priv->iface_base + MVPP22_XPCS_BASE(port->gop_id);
switch (port->phy_interface) {
- case PHY_INTERFACE_MODE_10GKR:
+ case PHY_INTERFACE_MODE_10GBASER:
val = readl(mpcs + MVPP22_MPCS_CLK_RESET);
val |= MAC_CLK_RESET_MAC | MAC_CLK_RESET_SD_RX |
MAC_CLK_RESET_SD_TX;
@@ -4758,7 +4758,7 @@ static void mvpp2_phylink_validate(struct phylink_config *config,
/* Invalid combinations */
switch (state->interface) {
- case PHY_INTERFACE_MODE_10GKR:
+ case PHY_INTERFACE_MODE_10GBASER:
case PHY_INTERFACE_MODE_XAUI:
if (port->gop_id != 0)
goto empty_set;
@@ -4780,7 +4780,7 @@ static void mvpp2_phylink_validate(struct phylink_config *config,
phylink_set(mask, Asym_Pause);
switch (state->interface) {
- case PHY_INTERFACE_MODE_10GKR:
+ case PHY_INTERFACE_MODE_10GBASER:
case PHY_INTERFACE_MODE_XAUI:
case PHY_INTERFACE_MODE_NA:
if (port->gop_id == 0) {
@@ -5247,6 +5247,15 @@ static int mvpp2_port_probe(struct platform_device *pdev,
goto err_free_netdev;
}
+ /*
+ * Rewrite 10GBASE-KR to 10GBASE-R for compatibility with existing DT.
+ * Existing usage of 10GBASE-KR is not correct; no backplane
+ * negotiation is done, and this driver does not actually support
+ * 10GBASE-KR.
+ */
+ if (phy_mode == PHY_INTERFACE_MODE_10GKR)
+ phy_mode = PHY_INTERFACE_MODE_10GBASER;
+
if (port_node) {
comphy = devm_of_phy_get(&pdev->dev, port_node, NULL);
if (IS_ERR(comphy)) {
diff --git a/drivers/net/phy/aquantia_main.c b/drivers/net/phy/aquantia_main.c
index 975789d9349d..31927b2c7d5a 100644
--- a/drivers/net/phy/aquantia_main.c
+++ b/drivers/net/phy/aquantia_main.c
@@ -358,9 +358,11 @@ static int aqr107_read_status(struct phy_device *phydev)
switch (FIELD_GET(MDIO_PHYXS_VEND_IF_STATUS_TYPE_MASK, val)) {
case MDIO_PHYXS_VEND_IF_STATUS_TYPE_KR:
- case MDIO_PHYXS_VEND_IF_STATUS_TYPE_XFI:
phydev->interface = PHY_INTERFACE_MODE_10GKR;
break;
+ case MDIO_PHYXS_VEND_IF_STATUS_TYPE_XFI:
+ phydev->interface = PHY_INTERFACE_MODE_10GBASER;
+ break;
case MDIO_PHYXS_VEND_IF_STATUS_TYPE_USXGMII:
phydev->interface = PHY_INTERFACE_MODE_USXGMII;
break;
@@ -493,7 +495,8 @@ static int aqr107_config_init(struct phy_device *phydev)
phydev->interface != PHY_INTERFACE_MODE_2500BASEX &&
phydev->interface != PHY_INTERFACE_MODE_XGMII &&
phydev->interface != PHY_INTERFACE_MODE_USXGMII &&
- phydev->interface != PHY_INTERFACE_MODE_10GKR)
+ phydev->interface != PHY_INTERFACE_MODE_10GKR &&
+ phydev->interface != PHY_INTERFACE_MODE_10GBASER)
return -ENODEV;
WARN(phydev->interface == PHY_INTERFACE_MODE_XGMII,
diff --git a/drivers/net/phy/bcm84881.c b/drivers/net/phy/bcm84881.c
index db59911b9b3c..14d55a77eb28 100644
--- a/drivers/net/phy/bcm84881.c
+++ b/drivers/net/phy/bcm84881.c
@@ -53,7 +53,7 @@ static int bcm84881_config_init(struct phy_device *phydev)
switch (phydev->interface) {
case PHY_INTERFACE_MODE_SGMII:
case PHY_INTERFACE_MODE_2500BASEX:
- case PHY_INTERFACE_MODE_10GKR:
+ case PHY_INTERFACE_MODE_10GBASER:
break;
default:
return -ENODEV;
@@ -218,7 +218,7 @@ static int bcm84881_read_status(struct phy_device *phydev)
if (mode == 1 || mode == 2)
phydev->interface = PHY_INTERFACE_MODE_SGMII;
else if (mode == 3)
- phydev->interface = PHY_INTERFACE_MODE_10GKR;
+ phydev->interface = PHY_INTERFACE_MODE_10GBASER;
else if (mode == 4)
phydev->interface = PHY_INTERFACE_MODE_2500BASEX;
switch (mode & 7) {
diff --git a/drivers/net/phy/marvell10g.c b/drivers/net/phy/marvell10g.c
index 512f27b0b5cd..64c9f3bba2cd 100644
--- a/drivers/net/phy/marvell10g.c
+++ b/drivers/net/phy/marvell10g.c
@@ -216,7 +216,7 @@ static int mv3310_sfp_insert(void *upstream, const struct sfp_eeprom_id *id)
sfp_parse_support(phydev->sfp_bus, id, support);
iface = sfp_select_interface(phydev->sfp_bus, support);
- if (iface != PHY_INTERFACE_MODE_10GKR) {
+ if (iface != PHY_INTERFACE_MODE_10GBASER) {
dev_err(&phydev->mdio.dev, "incompatible SFP module inserted\n");
return -EINVAL;
}
@@ -304,7 +304,7 @@ static int mv3310_config_init(struct phy_device *phydev)
phydev->interface != PHY_INTERFACE_MODE_2500BASEX &&
phydev->interface != PHY_INTERFACE_MODE_XAUI &&
phydev->interface != PHY_INTERFACE_MODE_RXAUI &&
- phydev->interface != PHY_INTERFACE_MODE_10GKR)
+ phydev->interface != PHY_INTERFACE_MODE_10GBASER)
return -ENODEV;
return 0;
@@ -386,16 +386,17 @@ static void mv3310_update_interface(struct phy_device *phydev)
{
if ((phydev->interface == PHY_INTERFACE_MODE_SGMII ||
phydev->interface == PHY_INTERFACE_MODE_2500BASEX ||
- phydev->interface == PHY_INTERFACE_MODE_10GKR) && phydev->link) {
+ phydev->interface == PHY_INTERFACE_MODE_10GBASER) &&
+ phydev->link) {
/* The PHY automatically switches its serdes interface (and
- * active PHYXS instance) between Cisco SGMII, 10GBase-KR and
+ * active PHYXS instance) between Cisco SGMII, 10GBase-R and
* 2500BaseX modes according to the speed. Florian suggests
* setting phydev->interface to communicate this to the MAC.
* Only do this if we are already in one of the above modes.
*/
switch (phydev->speed) {
case SPEED_10000:
- phydev->interface = PHY_INTERFACE_MODE_10GKR;
+ phydev->interface = PHY_INTERFACE_MODE_10GBASER;
break;
case SPEED_2500:
phydev->interface = PHY_INTERFACE_MODE_2500BASEX;
diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c
index ba9468cc8e13..cf9ce4b67826 100644
--- a/drivers/net/phy/phylink.c
+++ b/drivers/net/phy/phylink.c
@@ -298,6 +298,7 @@ static int phylink_parse_mode(struct phylink *pl, struct fwnode_handle *fwnode)
break;
case PHY_INTERFACE_MODE_10GKR:
+ case PHY_INTERFACE_MODE_10GBASER:
phylink_set(pl->supported, 10baseT_Half);
phylink_set(pl->supported, 10baseT_Full);
phylink_set(pl->supported, 100baseT_Half);
diff --git a/drivers/net/phy/sfp-bus.c b/drivers/net/phy/sfp-bus.c
index 06e6429b8b71..d949ea7b4f8c 100644
--- a/drivers/net/phy/sfp-bus.c
+++ b/drivers/net/phy/sfp-bus.c
@@ -373,7 +373,7 @@ phy_interface_t sfp_select_interface(struct sfp_bus *bus,
phylink_test(link_modes, 10000baseLRM_Full) ||
phylink_test(link_modes, 10000baseER_Full) ||
phylink_test(link_modes, 10000baseT_Full))
- return PHY_INTERFACE_MODE_10GKR;
+ return PHY_INTERFACE_MODE_10GBASER;
if (phylink_test(link_modes, 2500baseX_Full))
return PHY_INTERFACE_MODE_2500BASEX;
diff --git a/drivers/phy/marvell/phy-mvebu-cp110-comphy.c b/drivers/phy/marvell/phy-mvebu-cp110-comphy.c
index e3b87c94aaf6..e41367f36ee1 100644
--- a/drivers/phy/marvell/phy-mvebu-cp110-comphy.c
+++ b/drivers/phy/marvell/phy-mvebu-cp110-comphy.c
@@ -221,7 +221,7 @@ static const struct mvebu_comphy_conf mvebu_comphy_cp110_modes[] = {
ETH_CONF(2, 0, PHY_INTERFACE_MODE_SGMII, 0x1, COMPHY_FW_MODE_SGMII),
ETH_CONF(2, 0, PHY_INTERFACE_MODE_2500BASEX, 0x1, COMPHY_FW_MODE_HS_SGMII),
ETH_CONF(2, 0, PHY_INTERFACE_MODE_RXAUI, 0x1, COMPHY_FW_MODE_RXAUI),
- ETH_CONF(2, 0, PHY_INTERFACE_MODE_10GKR, 0x1, COMPHY_FW_MODE_XFI),
+ ETH_CONF(2, 0, PHY_INTERFACE_MODE_10GBASER, 0x1, COMPHY_FW_MODE_XFI),
GEN_CONF(2, 0, PHY_MODE_USB_HOST_SS, COMPHY_FW_MODE_USB3H),
GEN_CONF(2, 0, PHY_MODE_SATA, COMPHY_FW_MODE_SATA),
GEN_CONF(2, 0, PHY_MODE_PCIE, COMPHY_FW_MODE_PCIE),
@@ -235,14 +235,14 @@ static const struct mvebu_comphy_conf mvebu_comphy_cp110_modes[] = {
/* lane 4 */
ETH_CONF(4, 0, PHY_INTERFACE_MODE_SGMII, 0x2, COMPHY_FW_MODE_SGMII),
ETH_CONF(4, 0, PHY_INTERFACE_MODE_2500BASEX, 0x2, COMPHY_FW_MODE_HS_SGMII),
- ETH_CONF(4, 0, PHY_INTERFACE_MODE_10GKR, 0x2, COMPHY_FW_MODE_XFI),
+ ETH_CONF(4, 0, PHY_INTERFACE_MODE_10GBASER, 0x2, COMPHY_FW_MODE_XFI),
ETH_CONF(4, 0, PHY_INTERFACE_MODE_RXAUI, 0x2, COMPHY_FW_MODE_RXAUI),
GEN_CONF(4, 0, PHY_MODE_USB_DEVICE_SS, COMPHY_FW_MODE_USB3D),
GEN_CONF(4, 1, PHY_MODE_USB_HOST_SS, COMPHY_FW_MODE_USB3H),
GEN_CONF(4, 1, PHY_MODE_PCIE, COMPHY_FW_MODE_PCIE),
ETH_CONF(4, 1, PHY_INTERFACE_MODE_SGMII, 0x1, COMPHY_FW_MODE_SGMII),
ETH_CONF(4, 1, PHY_INTERFACE_MODE_2500BASEX, -1, COMPHY_FW_MODE_HS_SGMII),
- ETH_CONF(4, 1, PHY_INTERFACE_MODE_10GKR, -1, COMPHY_FW_MODE_XFI),
+ ETH_CONF(4, 1, PHY_INTERFACE_MODE_10GBASER, -1, COMPHY_FW_MODE_XFI),
/* lane 5 */
ETH_CONF(5, 1, PHY_INTERFACE_MODE_RXAUI, 0x2, COMPHY_FW_MODE_RXAUI),
GEN_CONF(5, 1, PHY_MODE_SATA, COMPHY_FW_MODE_SATA),
@@ -342,7 +342,7 @@ static int mvebu_comphy_ethernet_init_reset(struct mvebu_comphy_lane *lane)
MVEBU_COMPHY_SERDES_CFG0_RXAUI_MODE);
switch (lane->submode) {
- case PHY_INTERFACE_MODE_10GKR:
+ case PHY_INTERFACE_MODE_10GBASER:
val |= MVEBU_COMPHY_SERDES_CFG0_GEN_RX(0xe) |
MVEBU_COMPHY_SERDES_CFG0_GEN_TX(0xe);
break;
@@ -417,7 +417,7 @@ static int mvebu_comphy_ethernet_init_reset(struct mvebu_comphy_lane *lane)
/* refclk selection */
val = readl(priv->base + MVEBU_COMPHY_MISC_CTRL0(lane->id));
val &= ~MVEBU_COMPHY_MISC_CTRL0_REFCLK_SEL;
- if (lane->submode == PHY_INTERFACE_MODE_10GKR)
+ if (lane->submode == PHY_INTERFACE_MODE_10GBASER)
val |= MVEBU_COMPHY_MISC_CTRL0_ICP_FORCE;
writel(val, priv->base + MVEBU_COMPHY_MISC_CTRL0(lane->id));
@@ -564,7 +564,7 @@ static int mvebu_comphy_set_mode_rxaui(struct phy *phy)
return mvebu_comphy_init_plls(lane);
}
-static int mvebu_comphy_set_mode_10gkr(struct phy *phy)
+static int mvebu_comphy_set_mode_10gbaser(struct phy *phy)
{
struct mvebu_comphy_lane *lane = phy_get_drvdata(phy);
struct mvebu_comphy_priv *priv = lane->priv;
@@ -735,8 +735,8 @@ static int mvebu_comphy_power_on_legacy(struct phy *phy)
case PHY_INTERFACE_MODE_RXAUI:
ret = mvebu_comphy_set_mode_rxaui(phy);
break;
- case PHY_INTERFACE_MODE_10GKR:
- ret = mvebu_comphy_set_mode_10gkr(phy);
+ case PHY_INTERFACE_MODE_10GBASER:
+ ret = mvebu_comphy_set_mode_10gbaser(phy);
break;
default:
return -ENOTSUPP;
@@ -782,8 +782,8 @@ static int mvebu_comphy_power_on(struct phy *phy)
lane->id);
fw_speed = COMPHY_FW_SPEED_3125;
break;
- case PHY_INTERFACE_MODE_10GKR:
- dev_dbg(priv->dev, "set lane %d to 10G-KR mode\n",
+ case PHY_INTERFACE_MODE_10GBASER:
+ dev_dbg(priv->dev, "set lane %d to 10GBASE-R mode\n",
lane->id);
fw_speed = COMPHY_FW_SPEED_103125;
break;
--
2.20.1
Powered by blists - more mailing lists