| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Thu, 9 Jan 2020 15:44:12 +0000
From: "Alex Maftei (amaftei)" <amaftei@...arflare.com>
To: <netdev@...r.kernel.org>, <davem@...emloft.net>
CC: <linux-net-drivers@...arflare.com>, <scrum-linux@...arflare.com>
Subject: [PATCH net-next 3/9] sfc: move more MCDI port code
Various functions dealing with flow control, forward error correction,
polling, port number, and PHY testing.
Signed-off-by: Alexandru-Mihai Maftei <amaftei@...arflare.com>
---
drivers/net/ethernet/sfc/mcdi_port.c | 138 -------------------
drivers/net/ethernet/sfc/mcdi_port_common.c | 139 ++++++++++++++++++++
2 files changed, 139 insertions(+), 138 deletions(-)
diff --git a/drivers/net/ethernet/sfc/mcdi_port.c b/drivers/net/ethernet/sfc/mcdi_port.c
index d811753782dc..0db6068a668d 100644
--- a/drivers/net/ethernet/sfc/mcdi_port.c
+++ b/drivers/net/ethernet/sfc/mcdi_port.c
@@ -188,58 +188,6 @@ int efx_mcdi_port_reconfigure(struct efx_nic *efx)
efx->loopback_mode, 0);
}
-/* Verify that the forced flow control settings (!EFX_FC_AUTO) are
- * supported by the link partner. Warn the user if this isn't the case
- */
-void efx_mcdi_phy_check_fcntl(struct efx_nic *efx, u32 lpa)
-{
- struct efx_mcdi_phy_data *phy_cfg = efx->phy_data;
- u32 rmtadv;
-
- /* The link partner capabilities are only relevant if the
- * link supports flow control autonegotiation */
- if (~phy_cfg->supported_cap & (1 << MC_CMD_PHY_CAP_AN_LBN))
- return;
-
- /* If flow control autoneg is supported and enabled, then fine */
- if (efx->wanted_fc & EFX_FC_AUTO)
- return;
-
- rmtadv = 0;
- if (lpa & (1 << MC_CMD_PHY_CAP_PAUSE_LBN))
- rmtadv |= ADVERTISED_Pause;
- if (lpa & (1 << MC_CMD_PHY_CAP_ASYM_LBN))
- rmtadv |= ADVERTISED_Asym_Pause;
-
- if ((efx->wanted_fc & EFX_FC_TX) && rmtadv == ADVERTISED_Asym_Pause)
- netif_err(efx, link, efx->net_dev,
- "warning: link partner doesn't support pause frames");
-}
-
-bool efx_mcdi_phy_poll(struct efx_nic *efx)
-{
- struct efx_link_state old_state = efx->link_state;
- MCDI_DECLARE_BUF(outbuf, MC_CMD_GET_LINK_OUT_LEN);
- int rc;
-
- WARN_ON(!mutex_is_locked(&efx->mac_lock));
-
- BUILD_BUG_ON(MC_CMD_GET_LINK_IN_LEN != 0);
-
- rc = efx_mcdi_rpc(efx, MC_CMD_GET_LINK, NULL, 0,
- outbuf, sizeof(outbuf), NULL);
- if (rc)
- efx->link_state.up = false;
- else
- efx_mcdi_phy_decode_link(
- efx, &efx->link_state,
- MCDI_DWORD(outbuf, GET_LINK_OUT_LINK_SPEED),
- MCDI_DWORD(outbuf, GET_LINK_OUT_FLAGS),
- MCDI_DWORD(outbuf, GET_LINK_OUT_FCNTL));
-
- return !efx_link_state_equal(&efx->link_state, &old_state);
-}
-
static void efx_mcdi_phy_remove(struct efx_nic *efx)
{
struct efx_mcdi_phy_data *phy_data = efx->phy_data;
@@ -327,57 +275,6 @@ efx_mcdi_phy_set_link_ksettings(struct efx_nic *efx,
return 0;
}
-int efx_mcdi_phy_get_fecparam(struct efx_nic *efx, struct ethtool_fecparam *fec)
-{
- MCDI_DECLARE_BUF(outbuf, MC_CMD_GET_LINK_OUT_V2_LEN);
- u32 caps, active, speed; /* MCDI format */
- bool is_25g = false;
- size_t outlen;
- int rc;
-
- BUILD_BUG_ON(MC_CMD_GET_LINK_IN_LEN != 0);
- rc = efx_mcdi_rpc(efx, MC_CMD_GET_LINK, NULL, 0,
- outbuf, sizeof(outbuf), &outlen);
- if (rc)
- return rc;
- if (outlen < MC_CMD_GET_LINK_OUT_V2_LEN)
- return -EOPNOTSUPP;
-
- /* behaviour for 25G/50G links depends on 25G BASER bit */
- speed = MCDI_DWORD(outbuf, GET_LINK_OUT_V2_LINK_SPEED);
- is_25g = speed == 25000 || speed == 50000;
-
- caps = MCDI_DWORD(outbuf, GET_LINK_OUT_V2_CAP);
- fec->fec = mcdi_fec_caps_to_ethtool(caps, is_25g);
- /* BASER is never supported on 100G */
- if (speed == 100000)
- fec->fec &= ~ETHTOOL_FEC_BASER;
-
- active = MCDI_DWORD(outbuf, GET_LINK_OUT_V2_FEC_TYPE);
- switch (active) {
- case MC_CMD_FEC_NONE:
- fec->active_fec = ETHTOOL_FEC_OFF;
- break;
- case MC_CMD_FEC_BASER:
- fec->active_fec = ETHTOOL_FEC_BASER;
- break;
- case MC_CMD_FEC_RS:
- fec->active_fec = ETHTOOL_FEC_RS;
- break;
- default:
- netif_warn(efx, hw, efx->net_dev,
- "Firmware reports unrecognised FEC_TYPE %u\n",
- active);
- /* We don't know what firmware has picked. AUTO is as good a
- * "can't happen" value as any other.
- */
- fec->active_fec = ETHTOOL_FEC_AUTO;
- break;
- }
-
- return 0;
-}
-
static int efx_mcdi_phy_set_fecparam(struct efx_nic *efx,
const struct ethtool_fecparam *fec)
{
@@ -405,27 +302,6 @@ static int efx_mcdi_phy_set_fecparam(struct efx_nic *efx,
return 0;
}
-int efx_mcdi_phy_test_alive(struct efx_nic *efx)
-{
- MCDI_DECLARE_BUF(outbuf, MC_CMD_GET_PHY_STATE_OUT_LEN);
- size_t outlen;
- int rc;
-
- BUILD_BUG_ON(MC_CMD_GET_PHY_STATE_IN_LEN != 0);
-
- rc = efx_mcdi_rpc(efx, MC_CMD_GET_PHY_STATE, NULL, 0,
- outbuf, sizeof(outbuf), &outlen);
- if (rc)
- return rc;
-
- if (outlen < MC_CMD_GET_PHY_STATE_OUT_LEN)
- return -EIO;
- if (MCDI_DWORD(outbuf, GET_PHY_STATE_OUT_STATE) != MC_CMD_PHY_STATE_OK)
- return -EINVAL;
-
- return 0;
-}
-
static const char *const mcdi_sft9001_cable_diag_names[] = {
"cable.pairA.length",
"cable.pairB.length",
@@ -1008,17 +884,3 @@ void efx_mcdi_port_remove(struct efx_nic *efx)
efx->phy_op->remove(efx);
efx_nic_free_buffer(efx, &efx->stats_buffer);
}
-
-/* Get physical port number (EF10 only; on Siena it is same as PF number) */
-int efx_mcdi_port_get_number(struct efx_nic *efx)
-{
- MCDI_DECLARE_BUF(outbuf, MC_CMD_GET_PORT_ASSIGNMENT_OUT_LEN);
- int rc;
-
- rc = efx_mcdi_rpc(efx, MC_CMD_GET_PORT_ASSIGNMENT, NULL, 0,
- outbuf, sizeof(outbuf), NULL);
- if (rc)
- return rc;
-
- return MCDI_DWORD(outbuf, GET_PORT_ASSIGNMENT_OUT_PORT);
-}
diff --git a/drivers/net/ethernet/sfc/mcdi_port_common.c b/drivers/net/ethernet/sfc/mcdi_port_common.c
index 9763d59f7681..3b1c559246b4 100644
--- a/drivers/net/ethernet/sfc/mcdi_port_common.c
+++ b/drivers/net/ethernet/sfc/mcdi_port_common.c
@@ -348,3 +348,142 @@ u32 mcdi_fec_caps_to_ethtool(u32 caps, bool is_25g)
(baser_req ? ETHTOOL_FEC_BASER : 0) |
(baser == baser_req && rs == rs_req ? 0 : ETHTOOL_FEC_AUTO);
}
+
+/* Verify that the forced flow control settings (!EFX_FC_AUTO) are
+ * supported by the link partner. Warn the user if this isn't the case
+ */
+void efx_mcdi_phy_check_fcntl(struct efx_nic *efx, u32 lpa)
+{
+ struct efx_mcdi_phy_data *phy_cfg = efx->phy_data;
+ u32 rmtadv;
+
+ /* The link partner capabilities are only relevant if the
+ * link supports flow control autonegotiation
+ */
+ if (~phy_cfg->supported_cap & (1 << MC_CMD_PHY_CAP_AN_LBN))
+ return;
+
+ /* If flow control autoneg is supported and enabled, then fine */
+ if (efx->wanted_fc & EFX_FC_AUTO)
+ return;
+
+ rmtadv = 0;
+ if (lpa & (1 << MC_CMD_PHY_CAP_PAUSE_LBN))
+ rmtadv |= ADVERTISED_Pause;
+ if (lpa & (1 << MC_CMD_PHY_CAP_ASYM_LBN))
+ rmtadv |= ADVERTISED_Asym_Pause;
+
+ if ((efx->wanted_fc & EFX_FC_TX) && rmtadv == ADVERTISED_Asym_Pause)
+ netif_err(efx, link, efx->net_dev,
+ "warning: link partner doesn't support pause frames");
+}
+
+bool efx_mcdi_phy_poll(struct efx_nic *efx)
+{
+ struct efx_link_state old_state = efx->link_state;
+ MCDI_DECLARE_BUF(outbuf, MC_CMD_GET_LINK_OUT_LEN);
+ int rc;
+
+ WARN_ON(!mutex_is_locked(&efx->mac_lock));
+
+ BUILD_BUG_ON(MC_CMD_GET_LINK_IN_LEN != 0);
+
+ rc = efx_mcdi_rpc(efx, MC_CMD_GET_LINK, NULL, 0,
+ outbuf, sizeof(outbuf), NULL);
+ if (rc)
+ efx->link_state.up = false;
+ else
+ efx_mcdi_phy_decode_link(
+ efx, &efx->link_state,
+ MCDI_DWORD(outbuf, GET_LINK_OUT_LINK_SPEED),
+ MCDI_DWORD(outbuf, GET_LINK_OUT_FLAGS),
+ MCDI_DWORD(outbuf, GET_LINK_OUT_FCNTL));
+
+ return !efx_link_state_equal(&efx->link_state, &old_state);
+}
+
+int efx_mcdi_phy_get_fecparam(struct efx_nic *efx, struct ethtool_fecparam *fec)
+{
+ MCDI_DECLARE_BUF(outbuf, MC_CMD_GET_LINK_OUT_V2_LEN);
+ u32 caps, active, speed; /* MCDI format */
+ bool is_25g = false;
+ size_t outlen;
+ int rc;
+
+ BUILD_BUG_ON(MC_CMD_GET_LINK_IN_LEN != 0);
+ rc = efx_mcdi_rpc(efx, MC_CMD_GET_LINK, NULL, 0,
+ outbuf, sizeof(outbuf), &outlen);
+ if (rc)
+ return rc;
+ if (outlen < MC_CMD_GET_LINK_OUT_V2_LEN)
+ return -EOPNOTSUPP;
+
+ /* behaviour for 25G/50G links depends on 25G BASER bit */
+ speed = MCDI_DWORD(outbuf, GET_LINK_OUT_V2_LINK_SPEED);
+ is_25g = speed == 25000 || speed == 50000;
+
+ caps = MCDI_DWORD(outbuf, GET_LINK_OUT_V2_CAP);
+ fec->fec = mcdi_fec_caps_to_ethtool(caps, is_25g);
+ /* BASER is never supported on 100G */
+ if (speed == 100000)
+ fec->fec &= ~ETHTOOL_FEC_BASER;
+
+ active = MCDI_DWORD(outbuf, GET_LINK_OUT_V2_FEC_TYPE);
+ switch (active) {
+ case MC_CMD_FEC_NONE:
+ fec->active_fec = ETHTOOL_FEC_OFF;
+ break;
+ case MC_CMD_FEC_BASER:
+ fec->active_fec = ETHTOOL_FEC_BASER;
+ break;
+ case MC_CMD_FEC_RS:
+ fec->active_fec = ETHTOOL_FEC_RS;
+ break;
+ default:
+ netif_warn(efx, hw, efx->net_dev,
+ "Firmware reports unrecognised FEC_TYPE %u\n",
+ active);
+ /* We don't know what firmware has picked. AUTO is as good a
+ * "can't happen" value as any other.
+ */
+ fec->active_fec = ETHTOOL_FEC_AUTO;
+ break;
+ }
+
+ return 0;
+}
+
+int efx_mcdi_phy_test_alive(struct efx_nic *efx)
+{
+ MCDI_DECLARE_BUF(outbuf, MC_CMD_GET_PHY_STATE_OUT_LEN);
+ size_t outlen;
+ int rc;
+
+ BUILD_BUG_ON(MC_CMD_GET_PHY_STATE_IN_LEN != 0);
+
+ rc = efx_mcdi_rpc(efx, MC_CMD_GET_PHY_STATE, NULL, 0,
+ outbuf, sizeof(outbuf), &outlen);
+ if (rc)
+ return rc;
+
+ if (outlen < MC_CMD_GET_PHY_STATE_OUT_LEN)
+ return -EIO;
+ if (MCDI_DWORD(outbuf, GET_PHY_STATE_OUT_STATE) != MC_CMD_PHY_STATE_OK)
+ return -EINVAL;
+
+ return 0;
+}
+
+/* Get physical port number (EF10 only; on Siena it is same as PF number) */
+int efx_mcdi_port_get_number(struct efx_nic *efx)
+{
+ MCDI_DECLARE_BUF(outbuf, MC_CMD_GET_PORT_ASSIGNMENT_OUT_LEN);
+ int rc;
+
+ rc = efx_mcdi_rpc(efx, MC_CMD_GET_PORT_ASSIGNMENT, NULL, 0,
+ outbuf, sizeof(outbuf), NULL);
+ if (rc)
+ return rc;
+
+ return MCDI_DWORD(outbuf, GET_PORT_ASSIGNMENT_OUT_PORT);
+}
--
2.20.1
Powered by blists - more mailing lists