[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20200110074159.18473-2-kai.heng.feng@canonical.com>
Date: Fri, 10 Jan 2020 15:41:59 +0800
From: Kai-Heng Feng <kai.heng.feng@...onical.com>
To: davem@...emloft.ne, jeffrey.t.kirsher@...el.com
Cc: Kai-Heng Feng <kai.heng.feng@...onical.com>,
"David S. Miller" <davem@...emloft.net>,
Michal Kubecek <mkubecek@...e.cz>,
Florian Fainelli <f.fainelli@...il.com>,
Jiri Pirko <jiri@...lanox.com>,
Pablo Neira Ayuso <pablo@...filter.org>,
Maxime Chevallier <maxime.chevallier@...tlin.com>,
Jakub Kicinski <jakub.kicinski@...ronome.com>,
Li RongQing <lirongqing@...du.com>,
netdev@...r.kernel.org (open list:NETWORKING [GENERAL]),
linux-kernel@...r.kernel.org (open list)
Subject: [PATCH 2/2] ethtool: Call begin() and complete() in __ethtool_get_link_ksettings()
Device like igb gets runtime suspended when there's no link partner. We
can't get correct speed under that state:
$ cat /sys/class/net/enp3s0/speed
1000
In addition to that, an error can also be spotted in dmesg:
[ 385.991957] igb 0000:03:00.0 enp3s0: PCIe link lost
It's because the igb device doesn't get runtime resumed before calling
get_link_ksettings().
So let's call begin() and complete() like what dev_ethtool() does, to
runtime resume/suspend or power up/down the device properly.
Once this fix is in place, igb can show the speed correctly without link
partner:
$ cat /sys/class/net/enp3s0/speed
-1
Signed-off-by: Kai-Heng Feng <kai.heng.feng@...onical.com>
---
net/ethtool/ioctl.c | 15 ++++++++++++++-
1 file changed, 14 insertions(+), 1 deletion(-)
diff --git a/net/ethtool/ioctl.c b/net/ethtool/ioctl.c
index 182bffbffa78..c768dbf45fc4 100644
--- a/net/ethtool/ioctl.c
+++ b/net/ethtool/ioctl.c
@@ -423,13 +423,26 @@ struct ethtool_link_usettings {
int __ethtool_get_link_ksettings(struct net_device *dev,
struct ethtool_link_ksettings *link_ksettings)
{
+ int rc;
+
ASSERT_RTNL();
if (!dev->ethtool_ops->get_link_ksettings)
return -EOPNOTSUPP;
+ if (dev->ethtool_ops->begin) {
+ rc = dev->ethtool_ops->begin(dev);
+ if (rc < 0)
+ return rc;
+ }
+
memset(link_ksettings, 0, sizeof(*link_ksettings));
- return dev->ethtool_ops->get_link_ksettings(dev, link_ksettings);
+ rc = dev->ethtool_ops->get_link_ksettings(dev, link_ksettings);
+
+ if (dev->ethtool_ops->complete)
+ dev->ethtool_ops->complete(dev);
+
+ return rc;
}
EXPORT_SYMBOL(__ethtool_get_link_ksettings);
--
2.17.1
Powered by blists - more mailing lists