netdev - [PATCH 4/7] batman-adv: ELP - use wifi tx bitrate as fallback throughput

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Tue, 14 Jan 2020 15:23:48 +0100
From:   Simon Wunderlich <sw@...onwunderlich.de>
To:     davem@...emloft.net
Cc:     netdev@...r.kernel.org, b.a.t.m.a.n@...ts.open-mesh.org,
        René Treffer <treffer@...site.de>,
        Marek Lindner <mareklindner@...mailbox.ch>,
        Sven Eckelmann <sven@...fation.org>,
        Simon Wunderlich <sw@...onwunderlich.de>
Subject: [PATCH 4/7] batman-adv: ELP - use wifi tx bitrate as fallback throughput

From: René Treffer <treffer@...site.de>

Some wifi drivers (e.g. ath10k) provide per-station rx/tx values but no
estimated throughput. Setting a better estimate than the default 1 MBit
makes these devices work well with B.A.T.M.A.N. V.

Signed-off-by: René Treffer <treffer@...site.de>
Signed-off-by: Marek Lindner <mareklindner@...mailbox.ch>
Signed-off-by: Sven Eckelmann <sven@...fation.org>
Signed-off-by: Simon Wunderlich <sw@...onwunderlich.de>
---
 net/batman-adv/bat_v_elp.c | 13 ++++++++++---
 1 file changed, 10 insertions(+), 3 deletions(-)

diff --git a/net/batman-adv/bat_v_elp.c b/net/batman-adv/bat_v_elp.c
index 2614a9caee00..6536e8cc53a0 100644
--- a/net/batman-adv/bat_v_elp.c
+++ b/net/batman-adv/bat_v_elp.c
@@ -107,10 +107,17 @@ static u32 batadv_v_elp_get_throughput(struct batadv_hardif_neigh_node *neigh)
 		}
 		if (ret)
 			goto default_throughput;
-		if (!(sinfo.filled & BIT(NL80211_STA_INFO_EXPECTED_THROUGHPUT)))
-			goto default_throughput;
 
-		return sinfo.expected_throughput / 100;
+		if (sinfo.filled & BIT(NL80211_STA_INFO_EXPECTED_THROUGHPUT))
+			return sinfo.expected_throughput / 100;
+
+		/* try to estimate the expected throughput based on reported tx
+		 * rates
+		 */
+		if (sinfo.filled & BIT(NL80211_STA_INFO_TX_BITRATE))
+			return cfg80211_calculate_bitrate(&sinfo.txrate) / 3;
+
+		goto default_throughput;
 	}
 
 	/* if not a wifi interface, check if this device provides data via
-- 
2.20.1