| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1578985340-28775-2-git-send-email-sunil.kovvuri@gmail.com>
Date: Tue, 14 Jan 2020 12:32:04 +0530
From: sunil.kovvuri@...il.com
To: netdev@...r.kernel.org
Cc: davem@...emloft.net, kubakici@...pl,
Sunil Goutham <sgoutham@...vell.com>
Subject: [PATCH v2 01/17] octeontx2-pf: Add Marvell OcteonTX2 NIC driver
From: Sunil Goutham <sgoutham@...vell.com>
This patch adds template for the Marvell's OcteonTX2 network
controller's physical function driver. Just the probe, PCI
specific initialization and netdev registration.
Signed-off-by: Sunil Goutham <sgoutham@...vell.com>
---
drivers/net/ethernet/marvell/octeontx2/Kconfig | 8 +
drivers/net/ethernet/marvell/octeontx2/Makefile | 2 +
.../net/ethernet/marvell/octeontx2/nic/Makefile | 10 +
.../ethernet/marvell/octeontx2/nic/otx2_common.h | 77 ++++++++
.../net/ethernet/marvell/octeontx2/nic/otx2_pf.c | 220 +++++++++++++++++++++
.../net/ethernet/marvell/octeontx2/nic/otx2_reg.h | 51 +++++
6 files changed, 368 insertions(+)
create mode 100644 drivers/net/ethernet/marvell/octeontx2/nic/Makefile
create mode 100644 drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.h
create mode 100644 drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c
create mode 100644 drivers/net/ethernet/marvell/octeontx2/nic/otx2_reg.h
diff --git a/drivers/net/ethernet/marvell/octeontx2/Kconfig b/drivers/net/ethernet/marvell/octeontx2/Kconfig
index fb34fbd..ced514c 100644
--- a/drivers/net/ethernet/marvell/octeontx2/Kconfig
+++ b/drivers/net/ethernet/marvell/octeontx2/Kconfig
@@ -25,3 +25,11 @@ config NDC_DIS_DYNAMIC_CACHING
This config option disables caching of dynamic entries such as NIX SQEs
, NPA stack pages etc in NDC. Also locks down NIX SQ/CQ/RQ/RSS and
NPA Aura/Pool contexts.
+
+config OCTEONTX2_PF
+ tristate "Marvell OcteonTX2 NIC Physical Function driver"
+ select OCTEONTX2_MBOX
+ depends on (64BIT && COMPILE_TEST) || ARM64
+ depends on PCI
+ help
+ This driver supports Marvell's OcteonTX2 NIC physical function.
diff --git a/drivers/net/ethernet/marvell/octeontx2/Makefile b/drivers/net/ethernet/marvell/octeontx2/Makefile
index e579dcd..0064a69 100644
--- a/drivers/net/ethernet/marvell/octeontx2/Makefile
+++ b/drivers/net/ethernet/marvell/octeontx2/Makefile
@@ -3,4 +3,6 @@
# Makefile for Marvell OcteonTX2 device drivers.
#
+obj-$(CONFIG_OCTEONTX2_MBOX) += af/
obj-$(CONFIG_OCTEONTX2_AF) += af/
+obj-$(CONFIG_OCTEONTX2_PF) += nic/
diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/Makefile b/drivers/net/ethernet/marvell/octeontx2/nic/Makefile
new file mode 100644
index 0000000..622b803
--- /dev/null
+++ b/drivers/net/ethernet/marvell/octeontx2/nic/Makefile
@@ -0,0 +1,10 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Makefile for Marvell's OcteonTX2 ethernet device drivers
+#
+
+obj-$(CONFIG_OCTEONTX2_PF) += octeontx2_nicpf.o
+
+octeontx2_nicpf-y := otx2_pf.o
+
+ccflags-y += -I$(srctree)/drivers/net/ethernet/marvell/octeontx2/af
diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.h b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.h
new file mode 100644
index 0000000..9d52ab3
--- /dev/null
+++ b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.h
@@ -0,0 +1,77 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/* Marvell OcteonTx2 RVU Ethernet driver
+ *
+ * Copyright (C) 2020 Marvell International Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef OTX2_COMMON_H
+#define OTX2_COMMON_H
+
+#include <linux/pci.h>
+
+#include "otx2_reg.h"
+
+/* PCI device IDs */
+#define PCI_DEVID_OCTEONTX2_RVU_PF 0xA063
+
+/* PCI BAR nos */
+#define PCI_CFG_REG_BAR_NUM 2
+
+struct otx2_hw {
+ struct pci_dev *pdev;
+ u16 rx_queues;
+ u16 tx_queues;
+ u16 max_queues;
+};
+
+struct otx2_nic {
+ void __iomem *reg_base;
+ struct net_device *netdev;
+
+ struct otx2_hw hw;
+ struct pci_dev *pdev;
+ struct device *dev;
+};
+
+/* Register read/write APIs */
+static inline void __iomem *otx2_get_regaddr(struct otx2_nic *nic, u64 offset)
+{
+ u64 blkaddr;
+
+ switch ((offset >> RVU_FUNC_BLKADDR_SHIFT) & RVU_FUNC_BLKADDR_MASK) {
+ case BLKTYPE_NIX:
+ blkaddr = BLKADDR_NIX0;
+ break;
+ case BLKTYPE_NPA:
+ blkaddr = BLKADDR_NPA;
+ break;
+ default:
+ blkaddr = BLKADDR_RVUM;
+ break;
+ };
+
+ offset &= ~(RVU_FUNC_BLKADDR_MASK << RVU_FUNC_BLKADDR_SHIFT);
+ offset |= (blkaddr << RVU_FUNC_BLKADDR_SHIFT);
+
+ return nic->reg_base + offset;
+}
+
+static inline void otx2_write64(struct otx2_nic *nic, u64 offset, u64 val)
+{
+ void __iomem *addr = otx2_get_regaddr(nic, offset);
+
+ writeq(val, addr);
+}
+
+static inline u64 otx2_read64(struct otx2_nic *nic, u64 offset)
+{
+ void __iomem *addr = otx2_get_regaddr(nic, offset);
+
+ return readq(addr);
+}
+
+#endif /* OTX2_COMMON_H */
diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c
new file mode 100644
index 0000000..cf60efa
--- /dev/null
+++ b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c
@@ -0,0 +1,220 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Marvell OcteonTx2 RVU Physcial Function ethernet driver
+ *
+ * Copyright (C) 2020 Marvell International Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/etherdevice.h>
+#include <linux/of.h>
+#include <linux/if_vlan.h>
+#include <linux/iommu.h>
+#include <net/ip.h>
+
+#include "otx2_common.h"
+
+#define DRV_NAME "octeontx2-nicpf"
+#define DRV_STRING "Marvell OcteonTX2 NIC Physical Function Driver"
+#define DRV_VERSION "1.0"
+
+/* Supported devices */
+static const struct pci_device_id otx2_pf_id_table[] = {
+ { PCI_DEVICE(PCI_VENDOR_ID_CAVIUM, PCI_DEVID_OCTEONTX2_RVU_PF) },
+ { 0, } /* end of table */
+};
+
+MODULE_AUTHOR("Marvell International Ltd.");
+MODULE_DESCRIPTION(DRV_STRING);
+MODULE_LICENSE("GPL v2");
+MODULE_VERSION(DRV_VERSION);
+MODULE_DEVICE_TABLE(pci, otx2_pf_id_table);
+
+static int otx2_set_real_num_queues(struct net_device *netdev,
+ int tx_queues, int rx_queues)
+{
+ int err;
+
+ err = netif_set_real_num_tx_queues(netdev, tx_queues);
+ if (err) {
+ netdev_err(netdev,
+ "Failed to set no of Tx queues: %d\n", tx_queues);
+ return err;
+ }
+
+ err = netif_set_real_num_rx_queues(netdev, rx_queues);
+ if (err)
+ netdev_err(netdev,
+ "Failed to set no of Rx queues: %d\n", rx_queues);
+ return err;
+}
+
+static int otx2_open(struct net_device *netdev)
+{
+ netif_carrier_off(netdev);
+
+ return 0;
+}
+
+static int otx2_stop(struct net_device *netdev)
+{
+ return 0;
+}
+
+static const struct net_device_ops otx2_netdev_ops = {
+ .ndo_open = otx2_open,
+ .ndo_stop = otx2_stop,
+};
+
+static int otx2_check_pf_usable(struct otx2_nic *nic)
+{
+ u64 rev;
+
+ rev = otx2_read64(nic, RVU_PF_BLOCK_ADDRX_DISC(BLKADDR_RVUM));
+ rev = (rev >> 12) & 0xFF;
+ /* Check if AF has setup revision for RVUM block,
+ * otherwise this driver probe should be deferred
+ * until AF driver comes up.
+ */
+ if (!rev) {
+ dev_warn(nic->dev,
+ "AF is not initialized, deferring probe\n");
+ return -EPROBE_DEFER;
+ }
+ return 0;
+}
+
+static int otx2_probe(struct pci_dev *pdev, const struct pci_device_id *id)
+{
+ struct device *dev = &pdev->dev;
+ struct net_device *netdev;
+ struct otx2_nic *pf;
+ struct otx2_hw *hw;
+ int err, qcount;
+
+ err = pcim_enable_device(pdev);
+ if (err) {
+ dev_err(dev, "Failed to enable PCI device\n");
+ return err;
+ }
+
+ err = pci_request_regions(pdev, DRV_NAME);
+ if (err) {
+ dev_err(dev, "PCI request regions failed 0x%x\n", err);
+ return err;
+ }
+
+ err = pci_set_dma_mask(pdev, DMA_BIT_MASK(48));
+ if (err) {
+ dev_err(dev, "Unable to set DMA mask\n");
+ goto err_release_regions;
+ }
+
+ err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(48));
+ if (err) {
+ dev_err(dev, "Unable to set consistent DMA mask\n");
+ goto err_release_regions;
+ }
+
+ pci_set_master(pdev);
+
+ /* Set number of queues */
+ qcount = min_t(int, num_online_cpus(), num_online_cpus());
+
+ netdev = alloc_etherdev_mqs(sizeof(*pf), qcount, qcount);
+ if (!netdev) {
+ err = -ENOMEM;
+ goto err_release_regions;
+ }
+
+ pci_set_drvdata(pdev, netdev);
+ SET_NETDEV_DEV(netdev, &pdev->dev);
+ pf = netdev_priv(netdev);
+ pf->netdev = netdev;
+ pf->pdev = pdev;
+ pf->dev = dev;
+
+ hw = &pf->hw;
+ hw->pdev = pdev;
+ hw->rx_queues = qcount;
+ hw->tx_queues = qcount;
+ hw->max_queues = qcount;
+
+ /* Map CSRs */
+ pf->reg_base = pcim_iomap(pdev, PCI_CFG_REG_BAR_NUM, 0);
+ if (!pf->reg_base) {
+ dev_err(dev, "Unable to map physical function CSRs, aborting\n");
+ err = -ENOMEM;
+ goto err_free_netdev;
+ }
+
+ err = otx2_check_pf_usable(pf);
+ if (err)
+ goto err_free_netdev;
+
+ err = otx2_set_real_num_queues(netdev, hw->tx_queues, hw->rx_queues);
+ if (err)
+ goto err_free_netdev;
+
+ netdev->netdev_ops = &otx2_netdev_ops;
+
+ err = register_netdev(netdev);
+ if (err) {
+ dev_err(dev, "Failed to register netdevice\n");
+ goto err_free_netdev;
+ }
+
+ return 0;
+
+err_free_netdev:
+ pci_set_drvdata(pdev, NULL);
+ free_netdev(netdev);
+err_release_regions:
+ pci_release_regions(pdev);
+ return err;
+}
+
+static void otx2_remove(struct pci_dev *pdev)
+{
+ struct net_device *netdev = pci_get_drvdata(pdev);
+ struct otx2_nic *pf;
+
+ if (!netdev)
+ return;
+
+ pf = netdev_priv(netdev);
+
+ unregister_netdev(netdev);
+ pci_free_irq_vectors(pf->pdev);
+ pci_set_drvdata(pdev, NULL);
+ free_netdev(netdev);
+ pci_release_regions(pdev);
+}
+
+static struct pci_driver otx2_pf_driver = {
+ .name = DRV_NAME,
+ .id_table = otx2_pf_id_table,
+ .probe = otx2_probe,
+ .shutdown = otx2_remove,
+ .remove = otx2_remove,
+};
+
+static int __init otx2_rvupf_init_module(void)
+{
+ pr_info("%s: %s\n", DRV_NAME, DRV_STRING);
+
+ return pci_register_driver(&otx2_pf_driver);
+}
+
+static void __exit otx2_rvupf_cleanup_module(void)
+{
+ pci_unregister_driver(&otx2_pf_driver);
+}
+
+module_init(otx2_rvupf_init_module);
+module_exit(otx2_rvupf_cleanup_module);
diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_reg.h b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_reg.h
new file mode 100644
index 0000000..d0bd64a
--- /dev/null
+++ b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_reg.h
@@ -0,0 +1,51 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/* Marvell OcteonTx2 RVU Ethernet driver
+ *
+ * Copyright (C) 2020 Marvell International Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef OTX2_REG_H
+#define OTX2_REG_H
+
+#include <rvu_struct.h>
+
+/* RVU PF registers */
+#define RVU_PF_VFX_PFVF_MBOX0 (0x00000)
+#define RVU_PF_VFX_PFVF_MBOX1 (0x00008)
+#define RVU_PF_VFX_PFVF_MBOXX(a, b) (0x0 | (a) << 12 | (b) << 3)
+#define RVU_PF_VF_BAR4_ADDR (0x10)
+#define RVU_PF_BLOCK_ADDRX_DISC(a) (0x200 | (a) << 3)
+#define RVU_PF_VFME_STATUSX(a) (0x800 | (a) << 3)
+#define RVU_PF_VFTRPENDX(a) (0x820 | (a) << 3)
+#define RVU_PF_VFTRPEND_W1SX(a) (0x840 | (a) << 3)
+#define RVU_PF_VFPF_MBOX_INTX(a) (0x880 | (a) << 3)
+#define RVU_PF_VFPF_MBOX_INT_W1SX(a) (0x8A0 | (a) << 3)
+#define RVU_PF_VFPF_MBOX_INT_ENA_W1SX(a) (0x8C0 | (a) << 3)
+#define RVU_PF_VFPF_MBOX_INT_ENA_W1CX(a) (0x8E0 | (a) << 3)
+#define RVU_PF_VFFLR_INTX(a) (0x900 | (a) << 3)
+#define RVU_PF_VFFLR_INT_W1SX(a) (0x920 | (a) << 3)
+#define RVU_PF_VFFLR_INT_ENA_W1SX(a) (0x940 | (a) << 3)
+#define RVU_PF_VFFLR_INT_ENA_W1CX(a) (0x960 | (a) << 3)
+#define RVU_PF_VFME_INTX(a) (0x980 | (a) << 3)
+#define RVU_PF_VFME_INT_W1SX(a) (0x9A0 | (a) << 3)
+#define RVU_PF_VFME_INT_ENA_W1SX(a) (0x9C0 | (a) << 3)
+#define RVU_PF_VFME_INT_ENA_W1CX(a) (0x9E0 | (a) << 3)
+#define RVU_PF_PFAF_MBOX0 (0xC00)
+#define RVU_PF_PFAF_MBOX1 (0xC08)
+#define RVU_PF_PFAF_MBOXX(a) (0xC00 | (a) << 3)
+#define RVU_PF_INT (0xc20)
+#define RVU_PF_INT_W1S (0xc28)
+#define RVU_PF_INT_ENA_W1S (0xc30)
+#define RVU_PF_INT_ENA_W1C (0xc38)
+#define RVU_PF_MSIX_VECX_ADDR(a) (0x000 | (a) << 4)
+#define RVU_PF_MSIX_VECX_CTL(a) (0x008 | (a) << 4)
+#define RVU_PF_MSIX_PBAX(a) (0xF0000 | (a) << 3)
+
+#define RVU_FUNC_BLKADDR_SHIFT 20
+#define RVU_FUNC_BLKADDR_MASK 0x1FULL
+
+#endif /* OTX2_REG_H */
--
2.7.4
Powered by blists - more mailing lists