netdev - [PATCH net-next 0/2] Rate adaptation for Felix DSA switch

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Date:   Thu, 16 Jan 2020 20:19:31 +0200
From:   Vladimir Oltean <olteanv@...il.com>
To:     davem@...emloft.net, netdev@...r.kernel.org, linux@...linux.org.uk
Cc:     andrew@...n.ch, f.fainelli@...il.com, vivien.didelot@...il.com,
        claudiu.manoil@....com, Vladimir Oltean <olteanv@...il.com>
Subject: [PATCH net-next 0/2] Rate adaptation for Felix DSA switch

When operating the MAC at 2.5Gbps (2500Base-X and USXGMII/QSXGMII) and
in combination with certain PHYs, it is possible that the copper side
may operate at lower link speeds. In this case, it is the PHY who has a
MAC inside of it that emits pause frames towards the switch's MAC,
telling it to slow down so that the transmission is lossless.

These patches are the support needed for the switch side of things to
work.

Alex Marginean (2):
  net: dsa: felix: Handle PAUSE RX regardless of AN result
  net: dsa: felix: Allow PHY to AN 10/100/1000 with 2500 serdes link

 drivers/net/dsa/ocelot/felix.c | 17 ++++++++++-------
 1 file changed, 10 insertions(+), 7 deletions(-)

-- 
2.17.1