[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <1394712342-15778-341-Taiwan-albertk@realtek.com>
Date: Tue, 21 Jan 2020 20:40:29 +0800
From: Hayes Wang <hayeswang@...ltek.com>
To: <netdev@...r.kernel.org>
CC: <nic_swsd@...ltek.com>, <linux-kernel@...r.kernel.org>,
<linux-usb@...r.kernel.org>, <pmalani@...omium.org>,
<grundler@...omium.org>, Hayes Wang <hayeswang@...ltek.com>
Subject: [PATCH net 3/9] r8152: get default setting of WOL before initializing
Initailization would reset runtime suspend by tp->saved_wolopts, so
the tp->saved_wolopts should be set before initializing.
Signed-off-by: Hayes Wang <hayeswang@...ltek.com>
---
drivers/net/usb/r8152.c | 9 +++++----
1 file changed, 5 insertions(+), 4 deletions(-)
diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
index 64efd58279b3..e29e1a13e811 100644
--- a/drivers/net/usb/r8152.c
+++ b/drivers/net/usb/r8152.c
@@ -6738,6 +6738,11 @@ static int rtl8152_probe(struct usb_interface *intf,
intf->needs_remote_wakeup = 1;
+ if (!rtl_can_wakeup(tp))
+ __rtl_set_wol(tp, 0);
+ else
+ tp->saved_wolopts = __rtl_get_wol(tp);
+
tp->rtl_ops.init(tp);
#if IS_BUILTIN(CONFIG_USB_RTL8152)
/* Retry in case request_firmware() is not ready yet. */
@@ -6755,10 +6760,6 @@ static int rtl8152_probe(struct usb_interface *intf,
goto out1;
}
- if (!rtl_can_wakeup(tp))
- __rtl_set_wol(tp, 0);
-
- tp->saved_wolopts = __rtl_get_wol(tp);
if (tp->saved_wolopts)
device_set_wakeup_enable(&udev->dev, true);
else
--
2.21.0
Powered by blists - more mailing lists