netdev - [PATCH net v2 10/12] net/sonic: Fix command register usage

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <882be6a20e004183d9c741fad2673d48aa3e0a9f.1579641728.git.fthain@telegraphics.com.au>
Date:   Wed, 22 Jan 2020 08:22:08 +1100
From:   Finn Thain <fthain@...egraphics.com.au>
To:     "David S. Miller" <davem@...emloft.net>
Cc:     Thomas Bogendoerfer <tsbogend@...ha.franken.de>,
        Chris Zankel <chris@...kel.net>,
        Laurent Vivier <laurent@...ier.eu>,
        Geert Uytterhoeven <geert@...ux-m68k.org>,
        netdev@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: [PATCH net v2 10/12] net/sonic: Fix command register usage

There are several issues relating to command register usage during
chip initialization.

Firstly, the SONIC sometimes comes out of software reset with the
Start Timer bit set. This gets logged as,

    macsonic macsonic eth0: sonic_init: status=24, i=101

Avoid this by giving the Stop Timer command earlier than later.

Secondly, the loop that waits for the Read RRA command to complete has
the break condition inverted. That's why the for loop iterates until
its termination condition. Call the helper for this instead.

Finally, give the Receiver Enable command after clearing interrupts,
not before, to avoid the possibility of losing an interrupt.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Tested-by: Stan Johnson <userm57@...oo.com>
Signed-off-by: Finn Thain <fthain@...egraphics.com.au>
---
 drivers/net/ethernet/natsemi/sonic.c | 18 +++---------------
 1 file changed, 3 insertions(+), 15 deletions(-)

diff --git a/drivers/net/ethernet/natsemi/sonic.c b/drivers/net/ethernet/natsemi/sonic.c
index 6570b9428d12..55660acf5ccc 100644
--- a/drivers/net/ethernet/natsemi/sonic.c
+++ b/drivers/net/ethernet/natsemi/sonic.c
@@ -664,7 +664,6 @@ static void sonic_multicast_list(struct net_device *dev)
  */
 static int sonic_init(struct net_device *dev)
 {
-	unsigned int cmd;
 	struct sonic_local *lp = netdev_priv(dev);
 	int i;
 
@@ -681,7 +680,7 @@ static int sonic_init(struct net_device *dev)
 	 * enable interrupts, then completely initialize the SONIC
 	 */
 	SONIC_WRITE(SONIC_CMD, 0);
-	SONIC_WRITE(SONIC_CMD, SONIC_CR_RXDIS);
+	SONIC_WRITE(SONIC_CMD, SONIC_CR_RXDIS | SONIC_CR_STP);
 	sonic_quiesce(dev, SONIC_CR_ALL);
 
 	/*
@@ -711,14 +710,7 @@ static int sonic_init(struct net_device *dev)
 	netif_dbg(lp, ifup, dev, "%s: issuing RRRA command\n", __func__);
 
 	SONIC_WRITE(SONIC_CMD, SONIC_CR_RRRA);
-	i = 0;
-	while (i++ < 100) {
-		if (SONIC_READ(SONIC_CMD) & SONIC_CR_RRRA)
-			break;
-	}
-
-	netif_dbg(lp, ifup, dev, "%s: status=%x, i=%d\n", __func__,
-		  SONIC_READ(SONIC_CMD), i);
+	sonic_quiesce(dev, SONIC_CR_RRRA);
 
 	/*
 	 * Initialize the receive descriptors so that they
@@ -806,15 +798,11 @@ static int sonic_init(struct net_device *dev)
 	 * enable receiver, disable loopback
 	 * and enable all interrupts
 	 */
-	SONIC_WRITE(SONIC_CMD, SONIC_CR_RXEN | SONIC_CR_STP);
 	SONIC_WRITE(SONIC_RCR, SONIC_RCR_DEFAULT);
 	SONIC_WRITE(SONIC_TCR, SONIC_TCR_DEFAULT);
 	SONIC_WRITE(SONIC_ISR, 0x7fff);
 	SONIC_WRITE(SONIC_IMR, SONIC_IMR_DEFAULT);
-
-	cmd = SONIC_READ(SONIC_CMD);
-	if ((cmd & SONIC_CR_RXEN) == 0 || (cmd & SONIC_CR_STP) == 0)
-		printk(KERN_ERR "sonic_init: failed, status=%x\n", cmd);
+	SONIC_WRITE(SONIC_CMD, SONIC_CR_RXEN);
 
 	netif_dbg(lp, ifup, dev, "%s: new status=%x\n", __func__,
 		  SONIC_READ(SONIC_CMD));
-- 
2.24.1