netdev - [net-next 07/14] net/mlx5e: Set FEC to auto when configured mode is not supported

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20200124215431.47151-8-saeedm@mellanox.com>
Date:   Fri, 24 Jan 2020 21:55:08 +0000
From:   Saeed Mahameed <saeedm@...lanox.com>
To:     "David S. Miller" <davem@...emloft.net>
CC:     "netdev@...r.kernel.org" <netdev@...r.kernel.org>,
        Aya Levin <ayal@...lanox.com>,
        Eran Ben Elisha <eranbe@...lanox.com>,
        Saeed Mahameed <saeedm@...lanox.com>
Subject: [net-next 07/14] net/mlx5e: Set FEC to auto when configured mode is
 not supported

From: Aya Levin <ayal@...lanox.com>

When configuring FEC mode, driver tries to set it for all available
link types. If a link type doesn't support a FEC mode, set this link
type to auto (FW best effort). Prior to this patch, when a link type
didn't support a FEC mode is was set to no FEC.

Signed-off-by: Aya Levin <ayal@...lanox.com>
Reviewed-by: Eran Ben Elisha <eranbe@...lanox.com>
Signed-off-by: Saeed Mahameed <saeedm@...lanox.com>
---
 .../net/ethernet/mellanox/mlx5/core/en/port.c | 22 +++++--------------
 1 file changed, 6 insertions(+), 16 deletions(-)

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en/port.c b/drivers/net/ethernet/mellanox/mlx5/core/en/port.c
index fce6eccdcf8b..f0dc0ca3ddc4 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en/port.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en/port.c
@@ -501,8 +501,6 @@ int mlx5e_get_fec_mode(struct mlx5_core_dev *dev, u32 *fec_mode_active,
 
 int mlx5e_set_fec_mode(struct mlx5_core_dev *dev, u8 fec_policy)
 {
-	u8 fec_policy_nofec = BIT(MLX5E_FEC_NOFEC);
-	bool fec_mode_not_supp_in_speed = false;
 	u32 out[MLX5_ST_SZ_DW(pplm_reg)] = {};
 	u32 in[MLX5_ST_SZ_DW(pplm_reg)] = {};
 	int sz = MLX5_ST_SZ_BYTES(pplm_reg);
@@ -526,23 +524,15 @@ int mlx5e_set_fec_mode(struct mlx5_core_dev *dev, u8 fec_policy)
 
 	for (i = 0; i < MLX5E_FEC_SUPPORTED_SPEEDS; i++) {
 		mlx5e_get_fec_cap_field(out, &fec_caps, fec_supported_speeds[i]);
-		/* policy supported for link speed, or policy is auto */
-		if (fec_caps & fec_policy || fec_policy == fec_policy_auto) {
+		/* policy supported for link speed */
+		if (fec_caps & fec_policy)
 			mlx5e_fec_admin_field(out, &fec_policy, 1,
 					      fec_supported_speeds[i]);
-		} else {
-			/* turn off FEC if supported. Else, leave it the same */
-			if (fec_caps & fec_policy_nofec)
-				mlx5e_fec_admin_field(out, &fec_policy_nofec, 1,
-						      fec_supported_speeds[i]);
-			fec_mode_not_supp_in_speed = true;
-		}
+		else
+			/* set FEC to auto*/
+			mlx5e_fec_admin_field(out, &fec_policy_auto, 1,
+					      fec_supported_speeds[i]);
 	}
 
-	if (fec_mode_not_supp_in_speed)
-		mlx5_core_dbg(dev,
-			      "FEC policy 0x%x is not supported for some speeds",
-			      fec_policy);
-
 	return mlx5_core_access_reg(dev, out, sz, out, sz, MLX5_REG_PPLM, 0, 1);
 }
-- 
2.24.1