lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1580137671-22081-3-git-send-email-madalin.bucur@oss.nxp.com>
Date:   Mon, 27 Jan 2020 17:07:51 +0200
From:   Madalin Bucur <madalin.bucur@....nxp.com>
To:     davem@...emloft.net
Cc:     andrew@...n.ch, f.fainelli@...il.com, hkallweit1@...il.com,
        netdev@...r.kernel.org, ykaukab@...e.de,
        Madalin Bucur <madalin.bucur@....nxp.com>
Subject: [PATCH v2 2/2] dpaa_eth: support all modes with rate adapting PHYs

Stop removing modes that are not supported on the system interface
when the connected PHY is capable of rate adaptation. This addresses
an issue with the LS1046ARDB board 10G interface no longer working
with an 1G link partner after autonegotiation support was added
for the Aquantia PHY on board in

commit 09c4c57f7bc4 ("net: phy: aquantia: add support for auto-negotiation configuration")

Before this commit the values advertised by the PHY were not
influenced by the dpaa_eth driver removal of system-side unsupported
modes as the aqr_config_aneg() was basically a no-op. After this
commit, the modes removed by the dpaa_eth driver were no longer
advertised thus autonegotiation with 1G link partners failed.

Reported-by: Mian Yousaf Kaukab <ykaukab@...e.de>
Signed-off-by: Madalin Bucur <madalin.bucur@....nxp.com>
---
 drivers/net/ethernet/freescale/dpaa/dpaa_eth.c | 10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
index a301f0095223..d3eb235450e5 100644
--- a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
+++ b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
@@ -2471,9 +2471,13 @@ static int dpaa_phy_init(struct net_device *net_dev)
 		return -ENODEV;
 	}
 
-	/* Remove any features not supported by the controller */
-	ethtool_convert_legacy_u32_to_link_mode(mask, mac_dev->if_support);
-	linkmode_and(phy_dev->supported, phy_dev->supported, mask);
+	if (mac_dev->phy_if != PHY_INTERFACE_MODE_XGMII ||
+	    !phy_dev->rate_adaptation) {
+		/* Remove any features not supported by the controller */
+		ethtool_convert_legacy_u32_to_link_mode(mask,
+							mac_dev->if_support);
+		linkmode_and(phy_dev->supported, phy_dev->supported, mask);
+	}
 
 	phy_support_asym_pause(phy_dev);
 
-- 
2.1.0

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ