netdev - Re: [PATCH net-next v2] net: phy: dp83867: Add speed optimization feature

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <29de8f3f-d9ba-88b3-ca48-61936c012172@ti.com>
Date:   Tue, 4 Feb 2020 14:30:39 -0600
From:   Dan Murphy <dmurphy@...com>
To:     Heiner Kallweit <hkallweit1@...il.com>, <andrew@...n.ch>,
        <f.fainelli@...il.com>
CC:     <linux@...linux.org.uk>, <davem@...emloft.net>,
        <netdev@...r.kernel.org>, <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH net-next v2] net: phy: dp83867: Add speed optimization
 feature

Heiner

On 2/4/20 2:08 PM, Heiner Kallweit wrote:
> On 04.02.2020 19:13, Dan Murphy wrote:
>> Set the speed optimization bit on the DP83867 PHY.
>> This feature can also be strapped on the 64 pin PHY devices
>> but the 48 pin devices do not have the strap pin available to enable
>> this feature in the hardware.  PHY team suggests to have this bit set.
>>
>> With this bit set the PHY will auto negotiate and report the link
>> parameters in the PHYSTS register.  This register provides a single
>> location within the register set for quick access to commonly accessed
>> information.
>>
>> In this case when auto negotiation is on the PHY core reads the bits
>> that have been configured or if auto negotiation is off the PHY core
>> reads the BMCR register and sets the phydev parameters accordingly.
>>
>> This Giga bit PHY can throttle the speed to 100Mbps or 10Mbps to accomodate a
>> 4-wire cable.  If this should occur the PHYSTS register contains the
>> current negotiated speed and duplex mode.
>>
>> In overriding the genphy_read_status the dp83867_read_status will do a
>> genphy_read_status to setup the LP and pause bits.  And then the PHYSTS
>> register is read and the phydev speed and duplex mode settings are
>> updated.
>>
>> Signed-off-by: Dan Murphy <dmurphy@...com>
> net-next is closed currently. See here for details:
> https://www.kernel.org/doc/Documentation/networking/netdev-FAQ.txt
> Reopening will be announced on the netdev mailing list, you can also
> check net-next status here: http://vger.kernel.org/~davem/net-next.html
>
Thanks Heiner for the link I RTM.  I will wait for the opening.

Dan