netdev - [CFT 7/8] net: mvneta: use resolved link config in mac_link

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <E1j3k8B-00072w-4z@rmk-PC.armlinux.org.uk>
Date:   Mon, 17 Feb 2020 17:24:27 +0000
From:   Russell King <rmk+kernel@...linux.org.uk>
To:     Andrew Lunn <andrew@...n.ch>,
        Florian Fainelli <f.fainelli@...il.com>,
        Heiner Kallweit <hkallweit1@...il.com>
Cc:     "David S. Miller" <davem@...emloft.net>, netdev@...r.kernel.org,
        Thomas Petazzoni <thomas.petazzoni@...tlin.com>
Subject: [CFT 7/8] net: mvneta: use resolved link config in mac_link_up()

Convert the Marvell mvneta ethernet driver to use the finalised link
parameters in mac_link_up() rather than the parameters in mac_config().

Signed-off-by: Russell King <rmk+kernel@...linux.org.uk>
---
 drivers/net/ethernet/marvell/mvneta.c | 55 ++++++++++++++++++---------
 1 file changed, 38 insertions(+), 17 deletions(-)

diff --git a/drivers/net/ethernet/marvell/mvneta.c b/drivers/net/ethernet/marvell/mvneta.c
index 8eb5f7fd3bb2..247e7e7cbfd5 100644
--- a/drivers/net/ethernet/marvell/mvneta.c
+++ b/drivers/net/ethernet/marvell/mvneta.c
@@ -3817,13 +3817,9 @@ static void mvneta_mac_config(struct phylink_config *config, unsigned int mode,
 	new_clk = gmac_clk & ~MVNETA_GMAC_1MS_CLOCK_ENABLE;
 	new_an = gmac_an & ~(MVNETA_GMAC_INBAND_AN_ENABLE |
 			     MVNETA_GMAC_INBAND_RESTART_AN |
-			     MVNETA_GMAC_CONFIG_MII_SPEED |
-			     MVNETA_GMAC_CONFIG_GMII_SPEED |
 			     MVNETA_GMAC_AN_SPEED_EN |
 			     MVNETA_GMAC_ADVERT_SYM_FLOW_CTRL |
-			     MVNETA_GMAC_CONFIG_FLOW_CTRL |
 			     MVNETA_GMAC_AN_FLOW_CTRL_EN |
-			     MVNETA_GMAC_CONFIG_FULL_DUPLEX |
 			     MVNETA_GMAC_AN_DUPLEX_EN);
 
 	/* Even though it might look weird, when we're configured in
@@ -3838,24 +3834,20 @@ static void mvneta_mac_config(struct phylink_config *config, unsigned int mode,
 
 	if (phylink_test(state->advertising, Pause))
 		new_an |= MVNETA_GMAC_ADVERT_SYM_FLOW_CTRL;
-	if (state->pause & MLO_PAUSE_TXRX_MASK)
-		new_an |= MVNETA_GMAC_CONFIG_FLOW_CTRL;
 
 	if (!phylink_autoneg_inband(mode)) {
-		/* Phy or fixed speed */
-		if (state->duplex)
-			new_an |= MVNETA_GMAC_CONFIG_FULL_DUPLEX;
-
-		if (state->speed == SPEED_1000 || state->speed == SPEED_2500)
-			new_an |= MVNETA_GMAC_CONFIG_GMII_SPEED;
-		else if (state->speed == SPEED_100)
-			new_an |= MVNETA_GMAC_CONFIG_MII_SPEED;
+		/* Phy or fixed speed - nothing to do, leave the
+		 * configured speed, duplex and flow control as-is.
+		 */
 	} else if (state->interface == PHY_INTERFACE_MODE_SGMII) {
 		/* SGMII mode receives the state from the PHY */
 		new_ctrl2 |= MVNETA_GMAC2_INBAND_AN_ENABLE;
 		new_clk |= MVNETA_GMAC_1MS_CLOCK_ENABLE;
 		new_an = (new_an & ~(MVNETA_GMAC_FORCE_LINK_DOWN |
-				     MVNETA_GMAC_FORCE_LINK_PASS)) |
+				     MVNETA_GMAC_FORCE_LINK_PASS |
+				     MVNETA_GMAC_CONFIG_MII_SPEED |
+				     MVNETA_GMAC_CONFIG_GMII_SPEED |
+				     MVNETA_GMAC_CONFIG_FULL_DUPLEX)) |
 			 MVNETA_GMAC_INBAND_AN_ENABLE |
 			 MVNETA_GMAC_AN_SPEED_EN |
 			 MVNETA_GMAC_AN_DUPLEX_EN;
@@ -3864,7 +3856,8 @@ static void mvneta_mac_config(struct phylink_config *config, unsigned int mode,
 		new_ctrl0 |= MVNETA_GMAC0_PORT_1000BASE_X;
 		new_clk |= MVNETA_GMAC_1MS_CLOCK_ENABLE;
 		new_an = (new_an & ~(MVNETA_GMAC_FORCE_LINK_DOWN |
-				     MVNETA_GMAC_FORCE_LINK_PASS)) |
+				     MVNETA_GMAC_FORCE_LINK_PASS |
+				     MVNETA_GMAC_CONFIG_MII_SPEED)) |
 			 MVNETA_GMAC_INBAND_AN_ENABLE |
 			 MVNETA_GMAC_CONFIG_GMII_SPEED |
 			 /* The MAC only supports FD mode */
@@ -3964,8 +3957,36 @@ static void mvneta_mac_link_up(struct phylink_config *config,
 
 	if (!phylink_autoneg_inband(mode)) {
 		val = mvreg_read(pp, MVNETA_GMAC_AUTONEG_CONFIG);
-		val &= ~MVNETA_GMAC_FORCE_LINK_DOWN;
+		val &= ~(MVNETA_GMAC_FORCE_LINK_DOWN |
+			 MVNETA_GMAC_CONFIG_MII_SPEED |
+			 MVNETA_GMAC_CONFIG_GMII_SPEED |
+			 MVNETA_GMAC_CONFIG_FLOW_CTRL |
+			 MVNETA_GMAC_CONFIG_FULL_DUPLEX);
 		val |= MVNETA_GMAC_FORCE_LINK_PASS;
+
+		if (speed == SPEED_1000 || speed == SPEED_2500)
+			val |= MVNETA_GMAC_CONFIG_GMII_SPEED;
+		else if (speed == SPEED_100)
+			val |= MVNETA_GMAC_CONFIG_MII_SPEED;
+
+		if (duplex == DUPLEX_FULL)
+			val |= MVNETA_GMAC_CONFIG_FULL_DUPLEX;
+
+		if (tx_pause || rx_pause)
+			val |= MVNETA_GMAC_CONFIG_FLOW_CTRL;
+
+		mvreg_write(pp, MVNETA_GMAC_AUTONEG_CONFIG, val);
+	} else {
+		/* When inband doesn't cover flow control or flow control is
+		 * disabled, we need to manually configure it. This bit will
+		 * only have effect if MVNETA_GMAC_AN_FLOW_CTRL_EN is unset.
+		 */
+		val = mvreg_read(pp, MVNETA_GMAC_AUTONEG_CONFIG);
+		val &= ~MVNETA_GMAC_CONFIG_FLOW_CTRL;
+
+		if (tx_pause || rx_pause)
+			val |= MVNETA_GMAC_CONFIG_FLOW_CTRL;
+
 		mvreg_write(pp, MVNETA_GMAC_AUTONEG_CONFIG, val);
 	}
 
-- 
2.20.1