[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20200219032205.15264-9-saeedm@mellanox.com>
Date: Wed, 19 Feb 2020 03:23:16 +0000
From: Saeed Mahameed <saeedm@...lanox.com>
To: "David S. Miller" <davem@...emloft.net>,
"kuba@...nel.org" <kuba@...nel.org>
CC: "netdev@...r.kernel.org" <netdev@...r.kernel.org>,
Aya Levin <ayal@...lanox.com>,
Saeed Mahameed <saeedm@...lanox.com>
Subject: [net-next V4 08/13] net/mlx5e: Enforce setting of a single FEC mode
From: Aya Levin <ayal@...lanox.com>
Ethtool command allow setting of several FEC modes in a single set
command. The driver can only set a single FEC mode at a time. With this
patch driver will reply not-supported on setting several FEC modes.
Signed-off-by: Aya Levin <ayal@...lanox.com>
Signed-off-by: Saeed Mahameed <saeedm@...lanox.com>
---
drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c b/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c
index d674cb679895..d1664ff1772b 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c
@@ -1541,6 +1541,10 @@ static int mlx5e_set_fecparam(struct net_device *netdev,
int mode;
int err;
+ if (bitmap_weight((unsigned long *)&fecparam->fec,
+ ETHTOOL_FEC_BASER_BIT + 1) > 1)
+ return -EOPNOTSUPP;
+
for (mode = 0; mode < ARRAY_SIZE(pplm_fec_2_ethtool); mode++) {
if (!(pplm_fec_2_ethtool[mode] & fecparam->fec))
continue;
--
2.24.1
Powered by blists - more mailing lists