netdev - [for-next PATCH 1/5] phy: ti: gmii-sel: simplify config dependencies between net drivers and gmii phy

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20200222120358.10003-2-grygorii.strashko@ti.com>
Date:   Sat, 22 Feb 2020 14:03:54 +0200
From:   Grygorii Strashko <grygorii.strashko@...com>
To:     Kishon Vijay Abraham I <kishon@...com>,
        Tero Kristo <t-kristo@...com>,
        "David S. Miller" <davem@...emloft.net>
CC:     <netdev@...r.kernel.org>, Sekhar Nori <nsekhar@...com>,
        <linux-kernel@...r.kernel.org>, <devicetree@...r.kernel.org>,
        Rob Herring <robh+dt@...nel.org>,
        Grygorii Strashko <grygorii.strashko@...com>
Subject: [for-next PATCH 1/5] phy: ti: gmii-sel: simplify config dependencies between net drivers and gmii phy

The phy-gmii-sel can be only autoselacted in Kconfig and now the pretty
complex Kconfig dependencies are defined for phy-gmii-sel driver, which
also need to be updated every time phy-gmii-sel is re-used for any new
networking driver.

Simplify Kconfig definotion for phy-gmii-sel PHY driver - drop all
depndencies and from networking drivers and rely on using 'imply imply
PHY_TI_GMII_SEL' in Kconfig definotions for networking drivers instead.

Signed-off-by: Grygorii Strashko <grygorii.strashko@...com>
---
 drivers/net/ethernet/ti/Kconfig | 1 +
 drivers/phy/ti/Kconfig          | 3 ---
 2 files changed, 1 insertion(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/ti/Kconfig b/drivers/net/ethernet/ti/Kconfig
index bf98e0fa7d8b..8a6ca16eee3b 100644
--- a/drivers/net/ethernet/ti/Kconfig
+++ b/drivers/net/ethernet/ti/Kconfig
@@ -53,6 +53,7 @@ config TI_CPSW
 	select MFD_SYSCON
 	select PAGE_POOL
 	select REGMAP
+	imply PHY_TI_GMII_SEL
 	---help---
 	  This driver supports TI's CPSW Ethernet Switch.
 
diff --git a/drivers/phy/ti/Kconfig b/drivers/phy/ti/Kconfig
index 6dbe9d0b9ff3..15a3bcf32308 100644
--- a/drivers/phy/ti/Kconfig
+++ b/drivers/phy/ti/Kconfig
@@ -106,11 +106,8 @@ config TWL4030_USB
 
 config PHY_TI_GMII_SEL
 	tristate
-	default y if TI_CPSW=y || TI_CPSW_SWITCHDEV=y
-	depends on TI_CPSW || TI_CPSW_SWITCHDEV || COMPILE_TEST
 	select GENERIC_PHY
 	select REGMAP
-	default m
 	help
 	  This driver supports configuring of the TI CPSW Port mode depending on
 	  the Ethernet PHY connected to the CPSW Port.
-- 
2.17.1