| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20200226174706.5334-1-ap420073@gmail.com>
Date: Wed, 26 Feb 2020 17:47:06 +0000
From: Taehee Yoo <ap420073@...il.com>
To: davem@...emloft.net, kuba@...nel.org, subashab@...eaurora.org,
stranche@...eaurora.org, netdev@...r.kernel.org
Cc: ap420073@...il.com
Subject: [PATCH net 04/10] net: rmnet: fix suspicious RCU usage
rmnet_get_port() internally calls rcu_dereference_rtnl(),
which checks RTNL.
But rmnet_get_port() could be called by packet path.
The packet path is not protected by RTNL.
So, the suspicious RCU usage problem occurs.
Test commands:
ip netns add nst
ip link add veth0 type veth peer name veth1
ip link set veth1 netns nst
ip link add rmnet0 link veth0 type rmnet mux_id 1
ip netns exec nst ip link add rmnet1 link veth1 type rmnet mux_id 1
ip netns exec nst ip link set veth1 up
ip netns exec nst ip link set rmnet1 up
ip netns exec nst ip a a 192.168.100.2/24 dev rmnet1
ip link set veth0 up
ip link set rmnet0 up
ip a a 192.168.100.1/24 dev rmnet0
ping 192.168.100.2
Splat looks like:
[ 339.775811][ T969] =============================
[ 339.777204][ T969] WARNING: suspicious RCU usage
[ 339.778188][ T969] 5.5.0+ #407 Not tainted
[ 339.779123][ T969] -----------------------------
[ 339.780100][ T969] drivers/net/ethernet/qualcomm/rmnet/rmnet_config.c:389 suspicious rcu_dereference_check() usage!
[ 339.781943][ T969]
[ 339.781943][ T969] other info that might help us debug this:
[ 339.781943][ T969]
[ 339.783475][ T969]
[ 339.783475][ T969] rcu_scheduler_active = 2, debug_locks = 1
[ 339.784656][ T969] 5 locks held by ping/969:
[ 339.785406][ T969] #0: ffff88804cb897f0 (sk_lock-AF_INET){+.+.}, at: raw_sendmsg+0xab8/0x2980
[ 339.786766][ T969] #1: ffffffff92925460 (rcu_read_lock_bh){....}, at: ip_finish_output2+0x243/0x2150
[ 339.788308][ T969] #2: ffffffff92925460 (rcu_read_lock_bh){....}, at: __dev_queue_xmit+0x213/0x2e10
[ 339.790662][ T969] #3: ffff88805a924158 (&dev->qdisc_running_key#3){+...}, at: ip_finish_output2+0x714/0x2150
[ 339.792072][ T969] #4: ffff88805b4fdc98 (&dev->qdisc_xmit_lock_key#3){+.-.}, at: sch_direct_xmit+0x1e2/0x1020
[ 339.793445][ T969]
[ 339.793445][ T969] stack backtrace:
[ 339.794691][ T969] CPU: 3 PID: 969 Comm: ping Not tainted 5.5.0+ #407
[ 339.795946][ T969] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
[ 339.797621][ T969] Call Trace:
[ 339.798249][ T969] dump_stack+0x96/0xdb
[ 339.798847][ T969] rmnet_get_port.part.9+0x76/0x80 [rmnet]
[ 339.799583][ T969] rmnet_egress_handler+0x107/0x420 [rmnet]
[ 339.800350][ T969] ? sch_direct_xmit+0x1e2/0x1020
[ 339.801027][ T969] rmnet_vnd_start_xmit+0x3d/0xa0 [rmnet]
[ 339.801784][ T969] dev_hard_start_xmit+0x160/0x740
[ 339.802667][ T969] sch_direct_xmit+0x265/0x1020
[ ... ]
Fixes: ceed73a2cf4a ("drivers: net: ethernet: qualcomm: rmnet: Initial implementation")
Signed-off-by: Taehee Yoo <ap420073@...il.com>
---
drivers/net/ethernet/qualcomm/rmnet/rmnet_config.c | 13 ++++++-------
drivers/net/ethernet/qualcomm/rmnet/rmnet_config.h | 2 +-
.../net/ethernet/qualcomm/rmnet/rmnet_handlers.c | 4 ++--
drivers/net/ethernet/qualcomm/rmnet/rmnet_vnd.c | 2 ++
4 files changed, 11 insertions(+), 10 deletions(-)
diff --git a/drivers/net/ethernet/qualcomm/rmnet/rmnet_config.c b/drivers/net/ethernet/qualcomm/rmnet/rmnet_config.c
index 7a7d0f521352..93642cdd3305 100644
--- a/drivers/net/ethernet/qualcomm/rmnet/rmnet_config.c
+++ b/drivers/net/ethernet/qualcomm/rmnet/rmnet_config.c
@@ -382,11 +382,10 @@ struct rtnl_link_ops rmnet_link_ops __read_mostly = {
.fill_info = rmnet_fill_info,
};
-/* Needs either rcu_read_lock() or rtnl lock */
-struct rmnet_port *rmnet_get_port(struct net_device *real_dev)
+struct rmnet_port *rmnet_get_port_rcu(struct net_device *real_dev)
{
if (rmnet_is_real_dev_registered(real_dev))
- return rcu_dereference_rtnl(real_dev->rx_handler_data);
+ return rcu_dereference(real_dev->rx_handler_data);
else
return NULL;
}
@@ -412,7 +411,7 @@ int rmnet_add_bridge(struct net_device *rmnet_dev,
struct rmnet_port *port, *slave_port;
int err;
- port = rmnet_get_port(real_dev);
+ port = rmnet_get_port_rtnl(real_dev);
/* If there is more than one rmnet dev attached, its probably being
* used for muxing. Skip the briding in that case
@@ -427,7 +426,7 @@ int rmnet_add_bridge(struct net_device *rmnet_dev,
if (err)
return -EBUSY;
- slave_port = rmnet_get_port(slave_dev);
+ slave_port = rmnet_get_port_rtnl(slave_dev);
slave_port->rmnet_mode = RMNET_EPMODE_BRIDGE;
slave_port->bridge_ep = real_dev;
@@ -445,11 +444,11 @@ int rmnet_del_bridge(struct net_device *rmnet_dev,
struct net_device *real_dev = priv->real_dev;
struct rmnet_port *port, *slave_port;
- port = rmnet_get_port(real_dev);
+ port = rmnet_get_port_rtnl(real_dev);
port->rmnet_mode = RMNET_EPMODE_VND;
port->bridge_ep = NULL;
- slave_port = rmnet_get_port(slave_dev);
+ slave_port = rmnet_get_port_rtnl(slave_dev);
rmnet_unregister_real_device(slave_dev, slave_port);
netdev_dbg(slave_dev, "removed from rmnet as slave\n");
diff --git a/drivers/net/ethernet/qualcomm/rmnet/rmnet_config.h b/drivers/net/ethernet/qualcomm/rmnet/rmnet_config.h
index cd0a6bcbe74a..0d568dcfd65a 100644
--- a/drivers/net/ethernet/qualcomm/rmnet/rmnet_config.h
+++ b/drivers/net/ethernet/qualcomm/rmnet/rmnet_config.h
@@ -65,7 +65,7 @@ struct rmnet_priv {
struct rmnet_priv_stats stats;
};
-struct rmnet_port *rmnet_get_port(struct net_device *real_dev);
+struct rmnet_port *rmnet_get_port_rcu(struct net_device *real_dev);
struct rmnet_endpoint *rmnet_get_endpoint(struct rmnet_port *port, u8 mux_id);
int rmnet_add_bridge(struct net_device *rmnet_dev,
struct net_device *slave_dev,
diff --git a/drivers/net/ethernet/qualcomm/rmnet/rmnet_handlers.c b/drivers/net/ethernet/qualcomm/rmnet/rmnet_handlers.c
index 1b74bc160402..074a8b326c30 100644
--- a/drivers/net/ethernet/qualcomm/rmnet/rmnet_handlers.c
+++ b/drivers/net/ethernet/qualcomm/rmnet/rmnet_handlers.c
@@ -184,7 +184,7 @@ rx_handler_result_t rmnet_rx_handler(struct sk_buff **pskb)
return RX_HANDLER_PASS;
dev = skb->dev;
- port = rmnet_get_port(dev);
+ port = rmnet_get_port_rcu(dev);
switch (port->rmnet_mode) {
case RMNET_EPMODE_VND:
@@ -217,7 +217,7 @@ void rmnet_egress_handler(struct sk_buff *skb)
skb->dev = priv->real_dev;
mux_id = priv->mux_id;
- port = rmnet_get_port(skb->dev);
+ port = rmnet_get_port_rcu(skb->dev);
if (!port)
goto drop;
diff --git a/drivers/net/ethernet/qualcomm/rmnet/rmnet_vnd.c b/drivers/net/ethernet/qualcomm/rmnet/rmnet_vnd.c
index 509dfc895a33..a26e76e9d382 100644
--- a/drivers/net/ethernet/qualcomm/rmnet/rmnet_vnd.c
+++ b/drivers/net/ethernet/qualcomm/rmnet/rmnet_vnd.c
@@ -50,7 +50,9 @@ static netdev_tx_t rmnet_vnd_start_xmit(struct sk_buff *skb,
priv = netdev_priv(dev);
if (priv->real_dev) {
+ rcu_read_lock();
rmnet_egress_handler(skb);
+ rcu_read_unlock();
} else {
this_cpu_inc(priv->pcpu_stats->stats.tx_drops);
kfree_skb(skb);
--
2.17.1
Powered by blists - more mailing lists