lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date:   Thu, 5 Mar 2020 14:38:47 +0100
From:   Marek Behun <marek.behun@....cz>
To:     Russell King <rmk+kernel@...linux.org.uk>
Cc:     Andrew Lunn <andrew@...n.ch>,
        Florian Fainelli <f.fainelli@...il.com>,
        Heiner Kallweit <hkallweit1@...il.com>,
        "David S. Miller" <davem@...emloft.net>, netdev@...r.kernel.org,
        Vivien Didelot <vivien.didelot@...il.com>
Subject: Re: [PATCH net-next 06/10] net: dsa: mv88e6xxx: extend phylink to
 Serdes PHYs

On Thu, 05 Mar 2020 12:42:31 +0000
Russell King <rmk+kernel@...linux.org.uk> wrote:

> +int mv88e6390_serdes_pcs_link_up(struct mv88e6xxx_chip *chip, int port,
> +				 u8 lane, int speed, int duplex)
> +{
> +	u16 val, bmcr;
> +	int err;
> +
> +	err = mv88e6390_serdes_read(chip, lane, MDIO_MMD_PHYXS,
> +				    MV88E6390_SGMII_BMCR, &val);
> +	if (err)
> +		return err;
> +
> +	bmcr = val & ~(BMCR_SPEED100 | BMCR_FULLDPLX | BMCR_SPEED1000);
> +	switch (speed) {
> +	case SPEED_2500:
> +	case SPEED_1000:
> +		bmcr |= BMCR_SPEED1000;
>  		break;
> -	case MV88E6XXX_PORT_STS_CMODE_1000BASEX:
> -		mode = PHY_INTERFACE_MODE_1000BASEX;
> +	case SPEED_100:
> +		bmcr |= BMCR_SPEED100;
>  		break;
> -	case MV88E6XXX_PORT_STS_CMODE_2500BASEX:
> -		mode = PHY_INTERFACE_MODE_2500BASEX;
> +	case SPEED_10:
>  		break;
> -	default:
> -		mode = PHY_INTERFACE_MODE_NA;
>  	}
>  
> -	err = mv88e6xxx_port_setup_mac(chip, port, link, speed, duplex,
> -				       PAUSE_OFF, mode);
> -	if (err)
> -		dev_err(chip->dev, "can't propagate PHY settings to MAC: %d\n",
> -			err);
> -	else
> -		dsa_port_phylink_mac_change(ds, port, link == LINK_FORCED_UP);
> +	if (duplex == DUPLEX_FULL)
> +		bmcr |= BMCR_FULLDPLX;
> +
> +	if (bmcr == val)
> +		return 0;
> +
> +	return mv88e6390_serdes_write(chip, lane, MDIO_MMD_PHYXS,
> +				      MV88E6390_SGMII_BMCR, bmcr);
> +}

Hi,

some time ago I wondered if it would make sense to separate the
SERDES PHY code into a separate phy driver to reside in
drivers/net/phy/marvell-serdes.c or something like that. Are there
compatible PHYs which aren't integrated into a switch?

Marek

Powered by blists - more mailing lists