netdev - [PATCH v2 net] ipvlan: do not add hardware address of master to its unicast filter list

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-ID: <20200307123157.GA28858@incl>
Date:   Sat, 7 Mar 2020 13:31:57 +0100
From:   Jiri Wiesner <jwiesner@...e.com>
To:     netdev@...r.kernel.org
Cc:     "David S. Miller" <davem@...emloft.net>,
        Mahesh Bandewar <maheshb@...gle.com>,
        Andreas Taschner <Andreas.Taschner@...e.com>,
        Michal Kubecek <mkubecek@...e.cz>
Subject: [PATCH v2 net] ipvlan: do not add hardware address of master to its
 unicast filter list

There is a problem when ipvlan slaves are created on a master device that
is a vmxnet3 device (ipvlan in VMware guests). The vmxnet3 driver does not
support unicast address filtering. When an ipvlan device is brought up in
ipvlan_open(), the ipvlan driver calls dev_uc_add() to add the hardware
address of the vmxnet3 master device to the unicast address list of the
master device, phy_dev->uc. This inevitably leads to the vmxnet3 master
device being forced into promiscuous mode by __dev_set_rx_mode().

Promiscuous mode is switched on the master despite the fact that there is
still only one hardware address that the master device should use for
filtering in order for the ipvlan device to be able to receive packets.
The comment above struct net_device describes the uc_promisc member as a
"counter, that indicates, that promiscuous mode has been enabled due to
the need to listen to additional unicast addresses in a device that does
not implement ndo_set_rx_mode()". Moreover, the design of ipvlan
guarantees that only the hardware address of a master device,
phy_dev->dev_addr, will be used to transmit and receive all packets from
its ipvlan slaves. Thus, the unicast address list of the master device
should not be modified by ipvlan_open() and ipvlan_stop() in order to make
ipvlan a workable option on masters that do not support unicast address
filtering.

Fixes: 2ad7bf3638411 ("ipvlan: Initial check-in of the IPVLAN driver")
Reported-by: Per Sundstrom <per.sundstrom@...qube.se>
Signed-off-by: Jiri Wiesner <jwiesner@...e.com>
Reviewed-by: Eric Dumazet <edumazet@...gle.com>
Acked-by: Mahesh Bandewar <maheshb@...gle.com>
---
 drivers/net/ipvlan/ipvlan_main.c | 5 +----
 1 file changed, 1 insertion(+), 4 deletions(-)

diff --git a/drivers/net/ipvlan/ipvlan_main.c b/drivers/net/ipvlan/ipvlan_main.c
index a70662261a5a..f195f278a83a 100644
--- a/drivers/net/ipvlan/ipvlan_main.c
+++ b/drivers/net/ipvlan/ipvlan_main.c
@@ -164,7 +164,6 @@ static void ipvlan_uninit(struct net_device *dev)
 static int ipvlan_open(struct net_device *dev)
 {
 	struct ipvl_dev *ipvlan = netdev_priv(dev);
-	struct net_device *phy_dev = ipvlan->phy_dev;
 	struct ipvl_addr *addr;

 	if (ipvlan->port->mode == IPVLAN_MODE_L3 ||
@@ -178,7 +177,7 @@ static int ipvlan_open(struct net_device *dev)
 		ipvlan_ht_addr_add(ipvlan, addr);
 	rcu_read_unlock();

-	return dev_uc_add(phy_dev, phy_dev->dev_addr);
+	return 0;
 }

 static int ipvlan_stop(struct net_device *dev)
@@ -190,8 +189,6 @@ static int ipvlan_stop(struct net_device *dev)
 	dev_uc_unsync(phy_dev, dev);
 	dev_mc_unsync(phy_dev, dev);

-	dev_uc_del(phy_dev, phy_dev->dev_addr);
-
 	rcu_read_lock();
 	list_for_each_entry_rcu(addr, &ipvlan->addrs, anode)
 		ipvlan_ht_addr_del(addr);
-- 
2.16.4