[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20200313095545.GD14553@lunn.ch>
Date: Fri, 13 Mar 2020 10:55:45 +0100
From: Andrew Lunn <andrew@...n.ch>
To: Oleksij Rempel <o.rempel@...gutronix.de>
Cc: Florian Fainelli <f.fainelli@...il.com>,
Heiner Kallweit <hkallweit1@...il.com>,
Mark Rutland <mark.rutland@....com>,
Rob Herring <robh+dt@...nel.org>,
Sascha Hauer <s.hauer@...gutronix.de>,
Shawn Guo <shawnguo@...nel.org>,
"David S. Miller" <davem@...emloft.net>,
devicetree@...r.kernel.org, Fabio Estevam <festevam@...il.com>,
Liam Girdwood <lgirdwood@...il.com>,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
Mark Brown <broonie@...nel.org>, netdev@...r.kernel.org,
NXP Linux Team <linux-imx@....com>,
Pengutronix Kernel Team <kernel@...gutronix.de>,
Russell King <linux@...linux.org.uk>
Subject: Re: [PATCH v2 2/2] ARM: dts: imx6q-marsboard: properly define rgmii
PHY
On Fri, Mar 13, 2020 at 06:32:24AM +0100, Oleksij Rempel wrote:
> The Atheros AR8035 PHY can be autodetected but can't use interrupt
> support provided on this board. Define MDIO bus and the PHY node to make
> it work properly.
>
> Signed-off-by: Oleksij Rempel <o.rempel@...gutronix.de>
> ---
> arch/arm/boot/dts/imx6q-marsboard.dts | 15 ++++++++++++++-
> 1 file changed, 14 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm/boot/dts/imx6q-marsboard.dts b/arch/arm/boot/dts/imx6q-marsboard.dts
> index 84b30bd6908f..1f31d86a217b 100644
> --- a/arch/arm/boot/dts/imx6q-marsboard.dts
> +++ b/arch/arm/boot/dts/imx6q-marsboard.dts
> @@ -111,8 +111,21 @@ &fec {
> pinctrl-names = "default";
> pinctrl-0 = <&pinctrl_enet>;
> phy-mode = "rgmii-id";
> - phy-reset-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>;
> status = "okay";
Hi Oleksij
I don't see a phy-handle here. So is it still using phy_find_first()?
Andrew
Powered by blists - more mailing lists