netdev - [PATCH 00/14] net: ks8851: Unify KS8851 SPI and MLL drivers

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <20200323234303.526748-1-marex@denx.de>
Date:   Tue, 24 Mar 2020 00:42:49 +0100
From:   Marek Vasut <marex@...x.de>
To:     netdev@...r.kernel.org
Cc:     Marek Vasut <marex@...x.de>,
        "David S . Miller" <davem@...emloft.net>,
        Lukas Wunner <lukas@...ner.de>, Petr Stetiar <ynezz@...e.cz>,
        YueHaibing <yuehaibing@...wei.com>
Subject: [PATCH 00/14] net: ks8851: Unify KS8851 SPI and MLL drivers

The KS8851SNL/SNLI and KS8851-16MLL/MLLI/MLLU are very much the same pieces
of silicon, except the former has an SPI interface, while the later has a
parallel bus interface. Thus far, Linux has two separate drivers for each
and they are diverging considerably.

This series unifies them into a single driver with small SPI and parallel
bus specific parts. The approach here is to first separate out the SPI
specific parts into a separate file, then add parallel bus accessors in
another separate file and then finally remove the old parallel bus driver.
The reason for replacing the old parallel bus driver is because the SPI
bus driver is much higher quality.

Marek Vasut (14):
  net: ks8851: Factor out spi->dev in probe()/remove()
  net: ks8851: Replace dev_err() with netdev_err() in IRQ handler
  net: ks8851: Pass device pointer into ks8851_init_mac()
  net: ks8851: Use devm_alloc_etherdev()
  net: ks8851: Use dev_{get,set}_drvdata()
  net: ks8851: Remove ks8851_rdreg32()
  net: ks8851: Use 16-bit writes to program MAC address
  net: ks8851: Use 16-bit read of RXFC register
  net: ks8851: Split out SPI specific entries in struct ks8851_net
  net: ks8851: Split out SPI specific code from probe() and remove()
  net: ks8851: Implement register and FIFO accessor callbacks
  net: ks8851: Separate SPI operations into separate file
  net: ks8851: Implement Parallel bus operations
  net: ks8851: Remove ks8851_mll.c

 drivers/net/ethernet/micrel/Makefile     |    4 +-
 drivers/net/ethernet/micrel/ks8851.c     |  487 +-------
 drivers/net/ethernet/micrel/ks8851.h     |  123 ++
 drivers/net/ethernet/micrel/ks8851_mll.c | 1345 ----------------------
 drivers/net/ethernet/micrel/ks8851_par.c |  201 ++++
 drivers/net/ethernet/micrel/ks8851_spi.c |  311 +++++
 6 files changed, 690 insertions(+), 1781 deletions(-)
 delete mode 100644 drivers/net/ethernet/micrel/ks8851_mll.c
 create mode 100644 drivers/net/ethernet/micrel/ks8851_par.c
 create mode 100644 drivers/net/ethernet/micrel/ks8851_spi.c

Signed-off-by: Marek Vasut <marex@...x.de>
Cc: David S. Miller <davem@...emloft.net>
Cc: Lukas Wunner <lukas@...ner.de>
Cc: Petr Stetiar <ynezz@...e.cz>
Cc: YueHaibing <yuehaibing@...wei.com>

-- 
2.25.1