netdev - Re: user space interface for configuring T1 PHY management mode (master/slave)

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <e2a1877c-1cb2-e047-38e0-e3b41d941b33@denx.de>
Date:   Wed, 25 Mar 2020 11:21:10 +0100
From:   Marek Vasut <marex@...x.de>
To:     Oleksij Rempel <o.rempel@...gutronix.de>,
        David Miller <davem@...emloft.net>
Cc:     andrew@...n.ch, f.fainelli@...il.com, hkallweit1@...il.com,
        mark.rutland@....com, robh+dt@...nel.org, kernel@...gutronix.de,
        linux-kernel@...r.kernel.org, netdev@...r.kernel.org,
        david@...tonic.nl, devicetree@...r.kernel.org,
        linux@...linux.org.uk, olteanv@...il.com
Subject: Re: user space interface for configuring T1 PHY management mode
 (master/slave)

On 3/25/20 9:34 AM, Oleksij Rempel wrote:
> Hi all,

Hi,

> I'm working on mainlining of NXP1102 PHY (BroadR Reach/802.3bw) support.
> 
> Basic functionality is working and support with mainline kernel. Now it is time
> to extend it. According to the specification, each PHY can be master or slave.
> 
> The HW can be pre configured via bootstrap pins or fuses to have a default
> configuration. But in some cases we still need to be able to configure the PHY
> in a different mode: 
> --------------------------------------------------------------------------------
> http://www.ieee802.org/3/1TPCESG/public/BroadR_Reach_Automotive_Spec_V3.0.pdf
> 
> 6.1 MASTER-SLAVE configuration resolution
> 
> All BroadR-Reach PHYs will default to configure as SLAVE upon power up or reset
> until a management system (for example, processor/microcontroller) configures
> it to be MASTER. MASTER-SLAVE assignment for each link configuration is
> necessary for establishing the timing control of each PHY.

Thanks for reminding me of this. I sent out
https://patchwork.ozlabs.org/project/netdev/list/?series=166575
maybe it helps.