netdev - [PATCH v3 net-next 1/8] net: phy: bcm7xx: add jumbo frame configuration to PHY

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20200326224040.32014-2-olteanv@gmail.com>
Date:   Fri, 27 Mar 2020 00:40:33 +0200
From:   Vladimir Oltean <olteanv@...il.com>
To:     andrew@...n.ch, f.fainelli@...il.com, vivien.didelot@...il.com,
        davem@...emloft.net, jakub.kicinski@...ronome.com
Cc:     murali.policharla@...adcom.com, stephen@...workplumber.org,
        jiri@...nulli.us, idosch@...sch.org, kuba@...nel.org,
        nikolay@...ulusnetworks.com, netdev@...r.kernel.org
Subject: [PATCH v3 net-next 1/8] net: phy: bcm7xx: add jumbo frame configuration to PHY

From: Murali Krishna Policharla <murali.policharla@...adcom.com>

The BCM7XX PHY family requires special configuration to pass jumbo
frames. Do that during initial PHY setup.

Signed-off-by: Murali Krishna Policharla <murali.policharla@...adcom.com>
Reviewed-by: Scott Branden <scott.branden@...adcom.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@....com>
---
Changes in v3:
Using the bcm54xx_auxctl_read and phy_set_bits helpers.
Corrected the value of the shadow register from 7 to 0.

Changes in v2:
Patch is new.

 drivers/net/phy/bcm-phy-lib.c | 22 ++++++++++++++++++++++
 drivers/net/phy/bcm-phy-lib.h |  1 +
 drivers/net/phy/bcm7xxx.c     |  4 ++++
 include/linux/brcmphy.h       |  2 ++
 4 files changed, 29 insertions(+)

diff --git a/drivers/net/phy/bcm-phy-lib.c b/drivers/net/phy/bcm-phy-lib.c
index e0d3310957ff..e77b274a09fd 100644
--- a/drivers/net/phy/bcm-phy-lib.c
+++ b/drivers/net/phy/bcm-phy-lib.c
@@ -423,6 +423,28 @@ int bcm_phy_28nm_a0b0_afe_config_init(struct phy_device *phydev)
 }
 EXPORT_SYMBOL_GPL(bcm_phy_28nm_a0b0_afe_config_init);
 
+int bcm_phy_enable_jumbo(struct phy_device *phydev)
+{
+	int ret;
+
+	ret = bcm54xx_auxctl_read(phydev, MII_BCM54XX_AUXCTL_SHDWSEL_AUXCTL);
+	if (ret < 0)
+		return ret;
+
+	/* Enable extended length packet reception */
+	ret = bcm54xx_auxctl_write(phydev, MII_BCM54XX_AUXCTL_SHDWSEL_AUXCTL,
+				   ret | MII_BCM54XX_AUXCTL_ACTL_EXT_PKT_LEN);
+	if (ret < 0)
+		return ret;
+
+	/* Enable the elastic FIFO for raising the transmission limit from
+	 * 4.5KB to 10KB, at the expense of an additional 16 ns in propagation
+	 * latency.
+	 */
+	return phy_set_bits(phydev, MII_BCM54XX_ECR, MII_BCM54XX_ECR_FIFOE);
+}
+EXPORT_SYMBOL_GPL(bcm_phy_enable_jumbo);
+
 MODULE_DESCRIPTION("Broadcom PHY Library");
 MODULE_LICENSE("GPL v2");
 MODULE_AUTHOR("Broadcom Corporation");
diff --git a/drivers/net/phy/bcm-phy-lib.h b/drivers/net/phy/bcm-phy-lib.h
index c86fb9d1240c..129df819be8c 100644
--- a/drivers/net/phy/bcm-phy-lib.h
+++ b/drivers/net/phy/bcm-phy-lib.h
@@ -65,5 +65,6 @@ void bcm_phy_get_stats(struct phy_device *phydev, u64 *shadow,
 		       struct ethtool_stats *stats, u64 *data);
 void bcm_phy_r_rc_cal_reset(struct phy_device *phydev);
 int bcm_phy_28nm_a0b0_afe_config_init(struct phy_device *phydev);
+int bcm_phy_enable_jumbo(struct phy_device *phydev);
 
 #endif /* _LINUX_BCM_PHY_LIB_H */
diff --git a/drivers/net/phy/bcm7xxx.c b/drivers/net/phy/bcm7xxx.c
index af8eabe7a6d4..692048d86ab1 100644
--- a/drivers/net/phy/bcm7xxx.c
+++ b/drivers/net/phy/bcm7xxx.c
@@ -178,6 +178,10 @@ static int bcm7xxx_28nm_config_init(struct phy_device *phydev)
 		break;
 	}
 
+	if (ret)
+		return ret;
+
+	ret =  bcm_phy_enable_jumbo(phydev);
 	if (ret)
 		return ret;
 
diff --git a/include/linux/brcmphy.h b/include/linux/brcmphy.h
index b475e7f20d28..6462c5447872 100644
--- a/include/linux/brcmphy.h
+++ b/include/linux/brcmphy.h
@@ -79,6 +79,7 @@
 #define MII_BCM54XX_ECR		0x10	/* BCM54xx extended control register */
 #define MII_BCM54XX_ECR_IM	0x1000	/* Interrupt mask */
 #define MII_BCM54XX_ECR_IF	0x0800	/* Interrupt force */
+#define MII_BCM54XX_ECR_FIFOE	0x0001	/* FIFO elasticity */
 
 #define MII_BCM54XX_ESR		0x11	/* BCM54xx extended status register */
 #define MII_BCM54XX_ESR_IS	0x1000	/* Interrupt status */
@@ -119,6 +120,7 @@
 #define MII_BCM54XX_AUXCTL_SHDWSEL_AUXCTL	0x00
 #define MII_BCM54XX_AUXCTL_ACTL_TX_6DB		0x0400
 #define MII_BCM54XX_AUXCTL_ACTL_SMDSP_ENA	0x0800
+#define MII_BCM54XX_AUXCTL_ACTL_EXT_PKT_LEN	0x4000
 
 #define MII_BCM54XX_AUXCTL_SHDWSEL_MISC			0x07
 #define MII_BCM54XX_AUXCTL_SHDWSEL_MISC_WIRESPEED_EN	0x0010
-- 
2.17.1