| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <E1jIyT1-0003EG-CA@rmk-PC.armlinux.org.uk>
Date: Mon, 30 Mar 2020 18:44:55 +0100
From: Russell King <rmk+kernel@...linux.org.uk>
To: Andrew Lunn <andrew@...n.ch>,
Florian Fainelli <f.fainelli@...il.com>,
Heiner Kallweit <hkallweit1@...il.com>
Cc: "David S. Miller" <davem@...emloft.net>, netdev@...r.kernel.org
Subject: [PATCH net-next v3 3/3] net: phylink: add separate pcs operations
structure
Add a separate set of PCS operations, which MAC drivers can use to
couple phylink with their associated MAC PCS layer. The PCS
operations include:
- pcs_get_state() - reads the link up/down, resolved speed, duplex
and pause from the PCS.
- pcs_config() - configures the PCS for the specified mode, PHY
interface type, and setting the advertisement.
- pcs_an_restart() - restarts 802.3 in-band negotiation with the
link partner
- pcs_link_up() - informs the PCS that link has come up, and the
parameters of the link. Link parameters are used to program the
PCS for fixed speed and non-inband modes.
Reviewed-by: Andrew Lunn <andrew@...n.ch>
Reviewed-by: Florian Fainelli <f.fainelli@...il.com>
Signed-off-by: Russell King <rmk+kernel@...linux.org.uk>
---
drivers/net/phy/phylink.c | 77 ++++++++++++++++++++++++----------
include/linux/phylink.h | 88 +++++++++++++++++++++++++++++++++++++++
2 files changed, 143 insertions(+), 22 deletions(-)
diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c
index e2f30fd4d235..34ca12aec61b 100644
--- a/drivers/net/phy/phylink.c
+++ b/drivers/net/phy/phylink.c
@@ -41,6 +41,7 @@ struct phylink {
/* private: */
struct net_device *netdev;
const struct phylink_mac_ops *mac_ops;
+ const struct phylink_pcs_ops *pcs_ops;
struct phylink_config *config;
struct device *dev;
unsigned int old_link_state:1;
@@ -425,11 +426,32 @@ static void phylink_mac_config_up(struct phylink *pl,
phylink_mac_config(pl, state);
}
-static void phylink_mac_an_restart(struct phylink *pl)
+static void phylink_mac_pcs_an_restart(struct phylink *pl)
{
if (pl->link_config.an_enabled &&
- phy_interface_mode_is_8023z(pl->link_config.interface))
- pl->mac_ops->mac_an_restart(pl->config);
+ phy_interface_mode_is_8023z(pl->link_config.interface)) {
+ if (pl->pcs_ops)
+ pl->pcs_ops->pcs_an_restart(pl->config);
+ else
+ pl->mac_ops->mac_an_restart(pl->config);
+ }
+}
+
+static void phylink_pcs_config(struct phylink *pl, bool force_restart,
+ const struct phylink_link_state *state)
+{
+ bool restart = force_restart;
+
+ if (pl->pcs_ops && pl->pcs_ops->pcs_config(pl->config,
+ pl->cur_link_an_mode,
+ state->interface,
+ state->advertising))
+ restart = true;
+
+ phylink_mac_config(pl, state);
+
+ if (restart)
+ phylink_mac_pcs_an_restart(pl);
}
static void phylink_mac_pcs_get_state(struct phylink *pl,
@@ -445,7 +467,10 @@ static void phylink_mac_pcs_get_state(struct phylink *pl,
state->an_complete = 0;
state->link = 1;
- pl->mac_ops->mac_pcs_get_state(pl->config, state);
+ if (pl->pcs_ops)
+ pl->pcs_ops->pcs_get_state(pl->config, state);
+ else
+ pl->mac_ops->mac_pcs_get_state(pl->config, state);
}
/* The fixed state is... fixed except for the link state,
@@ -463,7 +488,7 @@ static void phylink_get_fixed_state(struct phylink *pl,
phylink_resolve_flow(state);
}
-static void phylink_mac_initial_config(struct phylink *pl)
+static void phylink_mac_initial_config(struct phylink *pl, bool force_restart)
{
struct phylink_link_state link_state;
@@ -489,7 +514,7 @@ static void phylink_mac_initial_config(struct phylink *pl)
link_state.link = false;
phylink_apply_manual_flow(pl, &link_state);
- phylink_mac_config(pl, &link_state);
+ phylink_pcs_config(pl, force_restart, &link_state);
}
static const char *phylink_pause_to_str(int pause)
@@ -506,12 +531,18 @@ static const char *phylink_pause_to_str(int pause)
}
}
-static void phylink_mac_link_up(struct phylink *pl,
- struct phylink_link_state link_state)
+static void phylink_link_up(struct phylink *pl,
+ struct phylink_link_state link_state)
{
struct net_device *ndev = pl->netdev;
pl->cur_interface = link_state.interface;
+
+ if (pl->pcs_ops && pl->pcs_ops->pcs_link_up)
+ pl->pcs_ops->pcs_link_up(pl->config, pl->cur_link_an_mode,
+ pl->cur_interface,
+ link_state.speed, link_state.duplex);
+
pl->mac_ops->mac_link_up(pl->config, pl->phydev,
pl->cur_link_an_mode, pl->cur_interface,
link_state.speed, link_state.duplex,
@@ -528,7 +559,7 @@ static void phylink_mac_link_up(struct phylink *pl,
phylink_pause_to_str(link_state.pause));
}
-static void phylink_mac_link_down(struct phylink *pl)
+static void phylink_link_down(struct phylink *pl)
{
struct net_device *ndev = pl->netdev;
@@ -597,9 +628,9 @@ static void phylink_resolve(struct work_struct *w)
if (link_changed) {
pl->old_link_state = link_state.link;
if (!link_state.link)
- phylink_mac_link_down(pl);
+ phylink_link_down(pl);
else
- phylink_mac_link_up(pl, link_state);
+ phylink_link_up(pl, link_state);
}
if (!link_state.link && pl->mac_link_dropped) {
pl->mac_link_dropped = false;
@@ -746,6 +777,12 @@ struct phylink *phylink_create(struct phylink_config *config,
}
EXPORT_SYMBOL_GPL(phylink_create);
+void phylink_add_pcs(struct phylink *pl, const struct phylink_pcs_ops *ops)
+{
+ pl->pcs_ops = ops;
+}
+EXPORT_SYMBOL_GPL(phylink_add_pcs);
+
/**
* phylink_destroy() - cleanup and destroy the phylink instance
* @pl: a pointer to a &struct phylink returned from phylink_create()
@@ -1082,14 +1119,12 @@ void phylink_start(struct phylink *pl)
/* Apply the link configuration to the MAC when starting. This allows
* a fixed-link to start with the correct parameters, and also
* ensures that we set the appropriate advertisement for Serdes links.
- */
- phylink_mac_initial_config(pl);
-
- /* Restart autonegotiation if using 802.3z to ensure that the link
+ *
+ * Restart autonegotiation if using 802.3z to ensure that the link
* parameters are properly negotiated. This is necessary for DSA
* switches using 802.3z negotiation to ensure they see our modes.
*/
- phylink_mac_an_restart(pl);
+ phylink_mac_initial_config(pl, true);
clear_bit(PHYLINK_DISABLE_STOPPED, &pl->phylink_disable_state);
phylink_run_resolve(pl);
@@ -1386,8 +1421,7 @@ int phylink_ethtool_ksettings_set(struct phylink *pl,
* advertisement; the only thing we have is the pause
* modes which can only come from a PHY.
*/
- phylink_mac_config(pl, &pl->link_config);
- phylink_mac_an_restart(pl);
+ phylink_pcs_config(pl, true, &pl->link_config);
}
mutex_unlock(&pl->state_mutex);
}
@@ -1415,7 +1449,7 @@ int phylink_ethtool_nway_reset(struct phylink *pl)
if (pl->phydev)
ret = phy_restart_aneg(pl->phydev);
- phylink_mac_an_restart(pl);
+ phylink_mac_pcs_an_restart(pl);
return ret;
}
@@ -1494,8 +1528,7 @@ int phylink_ethtool_set_pauseparam(struct phylink *pl,
pause->tx_pause);
} else if (!test_bit(PHYLINK_DISABLE_STOPPED,
&pl->phylink_disable_state)) {
- phylink_mac_config(pl, &pl->link_config);
- phylink_mac_an_restart(pl);
+ phylink_pcs_config(pl, true, &pl->link_config);
}
mutex_unlock(&pl->state_mutex);
@@ -1901,7 +1934,7 @@ static int phylink_sfp_config(struct phylink *pl, u8 mode,
if (changed && !test_bit(PHYLINK_DISABLE_STOPPED,
&pl->phylink_disable_state))
- phylink_mac_initial_config(pl);
+ phylink_mac_initial_config(pl, false);
return ret;
}
diff --git a/include/linux/phylink.h b/include/linux/phylink.h
index 90c907eaae15..3f8d37ec5503 100644
--- a/include/linux/phylink.h
+++ b/include/linux/phylink.h
@@ -270,9 +270,97 @@ void mac_link_up(struct phylink_config *config, struct phy_device *phy,
int speed, int duplex, bool tx_pause, bool rx_pause);
#endif
+/**
+ * struct phylink_pcs_ops - MAC PCS operations structure.
+ * @pcs_get_state: read the current MAC PCS link state from the hardware.
+ * @pcs_config: configure the MAC PCS for the selected mode and state.
+ * @pcs_an_restart: restart 802.3z BaseX autonegotiation.
+ * @pcs_link_up: program the PCS for the resolved link configuration
+ * (where necessary).
+ */
+struct phylink_pcs_ops {
+ void (*pcs_get_state)(struct phylink_config *config,
+ struct phylink_link_state *state);
+ int (*pcs_config)(struct phylink_config *config, unsigned int mode,
+ phy_interface_t interface,
+ const unsigned long *advertising);
+ void (*pcs_an_restart)(struct phylink_config *config);
+ void (*pcs_link_up)(struct phylink_config *config, unsigned int mode,
+ phy_interface_t interface, int speed, int duplex);
+};
+
+#if 0 /* For kernel-doc purposes only. */
+/**
+ * pcs_get_state() - Read the current inband link state from the hardware
+ * @config: a pointer to a &struct phylink_config.
+ * @state: a pointer to a &struct phylink_link_state.
+ *
+ * Read the current inband link state from the MAC PCS, reporting the
+ * current speed in @state->speed, duplex mode in @state->duplex, pause
+ * mode in @state->pause using the %MLO_PAUSE_RX and %MLO_PAUSE_TX bits,
+ * negotiation completion state in @state->an_complete, and link up state
+ * in @state->link. If possible, @state->lp_advertising should also be
+ * populated.
+ *
+ * When present, this overrides mac_pcs_get_state() in &struct
+ * phylink_mac_ops.
+ */
+void pcs_get_state(struct phylink_config *config,
+ struct phylink_link_state *state);
+
+/**
+ * pcs_config() - Configure the PCS mode and advertisement
+ * @config: a pointer to a &struct phylink_config.
+ * @mode: one of %MLO_AN_FIXED, %MLO_AN_PHY, %MLO_AN_INBAND.
+ * @interface: interface mode to be used
+ * @advertising: adertisement ethtool link mode mask
+ *
+ * Configure the PCS for the operating mode, the interface mode, and set
+ * the advertisement mask.
+ *
+ * When operating in %MLO_AN_INBAND, inband should always be enabled,
+ * otherwise inband should be disabled.
+ *
+ * For SGMII, there is no advertisement from the MAC side, the PCS should
+ * be programmed to acknowledge the inband word from the PHY.
+ *
+ * For 1000BASE-X, the advertisement should be programmed into the PCS.
+ *
+ * For most 10GBASE-R, there is no advertisement.
+ */
+int (*pcs_config)(struct phylink_config *config, unsigned int mode,
+ phy_interface_t interface, const unsigned long *advertising);
+
+/**
+ * pcs_an_restart() - restart 802.3z BaseX autonegotiation
+ * @config: a pointer to a &struct phylink_config.
+ *
+ * When PCS ops are present, this overrides mac_an_restart() in &struct
+ * phylink_mac_ops.
+ */
+void (*pcs_an_restart)(struct phylink_config *config);
+
+/**
+ * pcs_link_up() - program the PCS for the resolved link configuration
+ * @config: a pointer to a &struct phylink_config.
+ * @mode: link autonegotiation mode
+ * @interface: link &typedef phy_interface_t mode
+ * @speed: link speed
+ * @duplex: link duplex
+ *
+ * This call will be made just before mac_link_up() to inform the PCS of
+ * the resolved link parameters. For example, a PCS operating in SGMII
+ * mode without in-band AN needs to be manually configured for the link
+ * and duplex setting. Otherwise, this should be a no-op.
+ */
+void (*pcs_link_up)(struct phylink_config *config, unsigned int mode,
+ phy_interface_t interface, int speed, int duplex);
+#endif
+
struct phylink *phylink_create(struct phylink_config *, struct fwnode_handle *,
phy_interface_t iface,
const struct phylink_mac_ops *mac_ops);
+void phylink_add_pcs(struct phylink *, const struct phylink_pcs_ops *ops);
void phylink_destroy(struct phylink *);
int phylink_connect_phy(struct phylink *, struct phy_device *);
--
2.20.1
Powered by blists - more mailing lists