netdev - Re: [PATCH v2] ARM: imx: allow to disable board specific PHY fixups

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20200331075457.GJ25745@shell.armlinux.org.uk>
Date:   Tue, 31 Mar 2020 08:54:57 +0100
From:   Russell King - ARM Linux admin <linux@...linux.org.uk>
To:     Marc Kleine-Budde <mkl@...gutronix.de>
Cc:     Florian Fainelli <f.fainelli@...il.com>,
        Andrew Lunn <andrew@...n.ch>, netdev@...r.kernel.org,
        Sascha Hauer <s.hauer@...gutronix.de>,
        linux-kernel@...r.kernel.org,
        Oleksij Rempel <o.rempel@...gutronix.de>, linux-imx@....com,
        kernel@...gutronix.de, David Jander <david@...tonic.nl>,
        Shawn Guo <shawnguo@...nel.org>,
        Fabio Estevam <festevam@...il.com>,
        linux-arm-kernel@...ts.infradead.org,
        Heiner Kallweit <hkallweit1@...il.com>
Subject: Re: [PATCH v2] ARM: imx: allow to disable board specific PHY fixups

On Tue, Mar 31, 2020 at 09:47:19AM +0200, Marc Kleine-Budde wrote:
> On 3/30/20 7:41 PM, Russell King - ARM Linux admin wrote:
> >>> arch/arm/mach-imx/mach-imx6q.c:167:		phy_register_fixup_for_uid(PHY_ID_KSZ9021, MICREL_PHY_ID_MASK,
> >>> arch/arm/mach-imx/mach-imx6q.c:169:		phy_register_fixup_for_uid(PHY_ID_KSZ9031, MICREL_PHY_ID_MASK,
> >>> arch/arm/mach-imx/mach-imx6q.c:171:		phy_register_fixup_for_uid(PHY_ID_AR8031, 0xffffffef,
> >>> arch/arm/mach-imx/mach-imx6q.c:173:		phy_register_fixup_for_uid(PHY_ID_AR8035, 0xffffffef,
> > 
> > As far as I'm concerned, the AR8035 fixup is there with good reason.
> > It's not just "random" but is required to make the AR8035 usable with
> > the iMX6 SoCs.  Not because of a board level thing, but because it's
> > required for the AR8035 to be usable with an iMX6 SoC.
> 
> Is this still ture, if the AR8035 is attached to a switch behind an iMX6?

Do you know of such a setup, or are you talking about theoretical
situations?

-- 
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTC broadband for 0.8mile line in suburbia: sync at 10.2Mbps down 587kbps up