netdev - Re: [PATCH 1/3] dt-bindings: net: bluetooth: Add rtl8723bs-bluetooth

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-ID: <46b0f1dc-15df-55d5-1a9c-cb70a7d453ad@alistair23.me>
Date:   Sat, 4 Apr 2020 18:28:29 -0700
From:   Alistair Francis <alistair@...stair23.me>
To:     Martin Blumenstingl <martin.blumenstingl@...glemail.com>
Cc:     alistair23@...il.com, anarsoul@...il.com,
        devicetree@...r.kernel.org, johan.hedberg@...il.com,
        linux-arm-kernel@...ts.infradead.org,
        linux-bluetooth@...r.kernel.org, linux-kernel@...r.kernel.org,
        marcel@...tmann.org, mripard@...nel.org, netdev@...r.kernel.org,
        wens@...e.org, max.chou@...ltek.com, hdegoede@...hat.com
Subject: Re: [PATCH 1/3] dt-bindings: net: bluetooth: Add rtl8723bs-bluetooth

On 4/04/2020 3:42 pm, Martin Blumenstingl wrote:
> Hi Alistair,
>
> +Cc Max Chou, he may be interested in this also
>
> [...]
>> @@ -0,0 +1,56 @@
>> +# SPDX-License-Identifier: GPL-2.0
>> +%YAML 1.2
>> +---
>> +$id: http://devicetree.org/schemas/net/realtek,rtl8723bs-bt.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: RTL8723BS/RTL8723CS Bluetooth Device Tree Bindings
> I suggest you also add RTL8822C here (as well as to the compatible enum
> and the description below). commit 848fc6164158d6 ("Bluetooth: hci_h5:
> btrtl: Add support for RTL8822C") adde support for that chip but didn't
> add the dt-binding documentation.


Done!


>
> [...]
>> +  device-wake-gpios:
>> +    description:
>> +      GPIO specifier, used to wakeup the BT module (active high)
>> +
>> +  enable-gpios:
>> +    description:
>> +      GPIO specifier, used to enable the BT module (active high)
>> +
>> +  host-wake-gpios:
>> +    desciption:
>> +      GPIO specifier, used to wakeup the host processor (active high)
> regarding all GPIOs here: it entirely depends on the board whether these
> are active HIGH or LOW. even though the actual Bluetooth part may
> require a specific polarity there can be (for example) a transistor on
> the board which could be used to invert the polarity (from the SoC's
> view).


I have removed the "(active..." part from the GPIOs.


>
> also "make dt_binding_check" reports:
>    properties:host-wake-gpios: 'maxItems' is a required property
> I assume that it'll be the same for the other properties


Added.


>
>> +firmware-postfix: firmware postfix to be used for firmware config
> there's no other dt-binding that uses "firmware-postfix" yet. However,
> there are a few that use "firmware-name". My opinion hasn't changed
> since Vasily has posted this series initially: I would not add that
> property for now because there seems to be a "standard" config blob
> (which works for "all" boards), see Hans' analysis result of the ACPI
> config blobs for RTL8723BS: [0].


I have removed the 'firmware-postfix" part from this series.


> Getting that "standard" config blob into linux-firmware would be
> awesome (I assume licensing is not an issue here, Hans can probably give
> more details here). I'm not sure about the licenses of "board specific"
> config blobs and whether these can be added to linux-firmware.
>
> also indentation seems wrong here
>
>> +reset-gpios: GPIO specifier, used to reset the BT module (active high)
> indentation seems wrong here too


Fixed.


>
> also please note that there is currently no support for this property
> inside the hci_h5 driver and you don't seem to add support for it within
> this series either. so please double check that the reset GPIO is really
> wired up on your sopine board.


Removed.


>
>> +required:
>> +  - compatible
>> +
>> +examples:
>> +  - |
>> +    &uart1 {
>> +        pinctrl-names = "default";
>> +        pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
>> +        status = "okay";
> AFAIK the "status" property should be omitted from examples


Removed.


> Z
> also please add a "uart-has-rtscts" propery, see
> Documentation/devicetree/bindings/serial/serial.yaml
> Also please update patch #3.


Added.


Thanks for the review.


Alistair


>
>
> Martin
>
>
> [0] https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/commit/rtl_bt/rtl8723bs_config-OBDA8723.bin?id=e6b9001e91110c654573b8f8e2db6155d10d3b57