| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20200407174926.23971-3-andrzej.p@collabora.com>
Date: Tue, 7 Apr 2020 19:49:20 +0200
From: Andrzej Pietrasiewicz <andrzej.p@...labora.com>
To: linux-pm@...r.kernel.org
Cc: Zhang Rui <rui.zhang@...el.com>,
"Rafael J . Wysocki" <rjw@...ysocki.net>,
Len Brown <lenb@...nel.org>, Jiri Pirko <jiri@...lanox.com>,
Ido Schimmel <idosch@...lanox.com>,
"David S . Miller" <davem@...emloft.net>,
Peter Kaestle <peter@...e.net>,
Darren Hart <dvhart@...radead.org>,
Andy Shevchenko <andy@...radead.org>,
Support Opensource <support.opensource@...semi.com>,
Daniel Lezcano <daniel.lezcano@...aro.org>,
Amit Kucheria <amit.kucheria@...durent.com>,
Shawn Guo <shawnguo@...nel.org>,
Sascha Hauer <s.hauer@...gutronix.de>,
Pengutronix Kernel Team <kernel@...gutronix.de>,
Fabio Estevam <festevam@...il.com>,
NXP Linux Team <linux-imx@....com>,
Allison Randal <allison@...utok.net>,
Enrico Weigelt <info@...ux.net>,
Gayatri Kammela <gayatri.kammela@...el.com>,
Thomas Gleixner <tglx@...utronix.de>,
linux-acpi@...r.kernel.org, netdev@...r.kernel.org,
platform-driver-x86@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, kernel@...labora.com,
Andrzej Pietrasiewicz <andrzej.p@...labora.com>
Subject: [RFC 2/8] thermal: Properly handle mode values in .set_mode()
Allow only THERMAL_DEVICE_ENABLED and THERMAL_DEVICE_DISABLED as valid
states to transition to.
Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@...labora.com>
---
drivers/net/ethernet/mellanox/mlxsw/core_thermal.c | 8 ++++++--
drivers/platform/x86/acerhdf.c | 4 ++++
drivers/thermal/imx_thermal.c | 4 +++-
drivers/thermal/intel/intel_quark_dts_thermal.c | 5 ++++-
drivers/thermal/of-thermal.c | 4 +++-
5 files changed, 20 insertions(+), 5 deletions(-)
diff --git a/drivers/net/ethernet/mellanox/mlxsw/core_thermal.c b/drivers/net/ethernet/mellanox/mlxsw/core_thermal.c
index ce0a6837daa3..cd435ca7adbe 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/core_thermal.c
+++ b/drivers/net/ethernet/mellanox/mlxsw/core_thermal.c
@@ -296,8 +296,10 @@ static int mlxsw_thermal_set_mode(struct thermal_zone_device *tzdev,
if (mode == THERMAL_DEVICE_ENABLED)
tzdev->polling_delay = thermal->polling_delay;
- else
+ else if (mode == THERMAL_DEVICE_DISABLED)
tzdev->polling_delay = 0;
+ else
+ return -EINVAL;
mutex_unlock(&tzdev->lock);
@@ -486,8 +488,10 @@ static int mlxsw_thermal_module_mode_set(struct thermal_zone_device *tzdev,
if (mode == THERMAL_DEVICE_ENABLED)
tzdev->polling_delay = thermal->polling_delay;
- else
+ else if (mode == THERMAL_DEVICE_DISABLED)
tzdev->polling_delay = 0;
+ else
+ return -EINVAL;
mutex_unlock(&tzdev->lock);
diff --git a/drivers/platform/x86/acerhdf.c b/drivers/platform/x86/acerhdf.c
index 8cc86f4e3ac1..d5188c1d688b 100644
--- a/drivers/platform/x86/acerhdf.c
+++ b/drivers/platform/x86/acerhdf.c
@@ -431,6 +431,10 @@ static int acerhdf_get_mode(struct thermal_zone_device *thermal,
static int acerhdf_set_mode(struct thermal_zone_device *thermal,
enum thermal_device_mode mode)
{
+ if (mode != THERMAL_DEVICE_DISABLED &&
+ mode != THERMAL_DEVICE_ENABLED)
+ return -EINVAL;
+
if (mode == THERMAL_DEVICE_DISABLED && kernelmode)
acerhdf_revert_to_bios_mode();
else if (mode == THERMAL_DEVICE_ENABLED && !kernelmode)
diff --git a/drivers/thermal/imx_thermal.c b/drivers/thermal/imx_thermal.c
index bb6754a5342c..014512581918 100644
--- a/drivers/thermal/imx_thermal.c
+++ b/drivers/thermal/imx_thermal.c
@@ -368,7 +368,7 @@ static int imx_set_mode(struct thermal_zone_device *tz,
data->irq_enabled = true;
enable_irq(data->irq);
}
- } else {
+ } else if (mode == THERMAL_DEVICE_DISABLED) {
regmap_write(map, soc_data->sensor_ctrl + REG_CLR,
soc_data->measure_temp_mask);
regmap_write(map, soc_data->sensor_ctrl + REG_SET,
@@ -381,6 +381,8 @@ static int imx_set_mode(struct thermal_zone_device *tz,
disable_irq(data->irq);
data->irq_enabled = false;
}
+ } else {
+ return -EINVAL;
}
data->mode = mode;
diff --git a/drivers/thermal/intel/intel_quark_dts_thermal.c b/drivers/thermal/intel/intel_quark_dts_thermal.c
index 5d33b350da1c..5f4bcc0e4fd3 100644
--- a/drivers/thermal/intel/intel_quark_dts_thermal.c
+++ b/drivers/thermal/intel/intel_quark_dts_thermal.c
@@ -328,8 +328,11 @@ static int sys_set_mode(struct thermal_zone_device *tzd,
mutex_lock(&dts_update_mutex);
if (mode == THERMAL_DEVICE_ENABLED)
ret = soc_dts_enable(tzd);
- else
+ else if (mode == THERMAL_DEVICE_DISABLED)
ret = soc_dts_disable(tzd);
+ else
+ return -EINVAL;
+
mutex_unlock(&dts_update_mutex);
return ret;
diff --git a/drivers/thermal/of-thermal.c b/drivers/thermal/of-thermal.c
index ef0baa954ff0..b7621dfab17c 100644
--- a/drivers/thermal/of-thermal.c
+++ b/drivers/thermal/of-thermal.c
@@ -289,9 +289,11 @@ static int of_thermal_set_mode(struct thermal_zone_device *tz,
if (mode == THERMAL_DEVICE_ENABLED) {
tz->polling_delay = data->polling_delay;
tz->passive_delay = data->passive_delay;
- } else {
+ } else if (mode == THERMAL_DEVICE_DISABLED) {
tz->polling_delay = 0;
tz->passive_delay = 0;
+ } else {
+ return -EINVAL;
}
mutex_unlock(&tz->lock);
--
2.17.1
Powered by blists - more mailing lists