[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20200411230347.22371-53-sashal@kernel.org>
Date: Sat, 11 Apr 2020 19:02:10 -0400
From: Sasha Levin <sashal@...nel.org>
To: linux-kernel@...r.kernel.org, stable@...r.kernel.org
Cc: Florian Fainelli <f.fainelli@...il.com>,
"David S . Miller" <davem@...emloft.net>,
Sasha Levin <sashal@...nel.org>, netdev@...r.kernel.org
Subject: [PATCH AUTOSEL 5.6 053/149] net: dsa: bcm_sf2: Also configure Port 5 for 2Gb/sec on 7278
From: Florian Fainelli <f.fainelli@...il.com>
[ Upstream commit 7458bd540fa0a90220b9e8c349d910d9dde9caf8 ]
Either port 5 or port 8 can be used on a 7278 device, make sure that
port 5 also gets configured properly for 2Gb/sec in that case.
Signed-off-by: Florian Fainelli <f.fainelli@...il.com>
Signed-off-by: David S. Miller <davem@...emloft.net>
Signed-off-by: Sasha Levin <sashal@...nel.org>
---
drivers/net/dsa/bcm_sf2.c | 3 +++
drivers/net/dsa/bcm_sf2_regs.h | 1 +
2 files changed, 4 insertions(+)
diff --git a/drivers/net/dsa/bcm_sf2.c b/drivers/net/dsa/bcm_sf2.c
index b0f5280a83cb6..d9b003432e71b 100644
--- a/drivers/net/dsa/bcm_sf2.c
+++ b/drivers/net/dsa/bcm_sf2.c
@@ -615,6 +615,9 @@ static void bcm_sf2_sw_mac_config(struct dsa_switch *ds, int port,
if (state->duplex == DUPLEX_FULL)
reg |= DUPLX_MODE;
+ if (priv->type == BCM7278_DEVICE_ID && dsa_is_cpu_port(ds, port))
+ reg |= GMIIP_SPEED_UP_2G;
+
core_writel(priv, reg, offset);
}
diff --git a/drivers/net/dsa/bcm_sf2_regs.h b/drivers/net/dsa/bcm_sf2_regs.h
index d8a5e6269c0ef..7844781763359 100644
--- a/drivers/net/dsa/bcm_sf2_regs.h
+++ b/drivers/net/dsa/bcm_sf2_regs.h
@@ -178,6 +178,7 @@ enum bcm_sf2_reg_offs {
#define RXFLOW_CNTL (1 << 4)
#define TXFLOW_CNTL (1 << 5)
#define SW_OVERRIDE (1 << 6)
+#define GMIIP_SPEED_UP_2G (1 << 7)
#define CORE_WATCHDOG_CTRL 0x001e4
#define SOFTWARE_RESET (1 << 7)
--
2.20.1
Powered by blists - more mailing lists