[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <18fe946c32093f50462e026090a9e32eb568c8c5.1587103852.git.baruch@tkos.co.il>
Date: Fri, 17 Apr 2020 09:10:52 +0300
From: Baruch Siach <baruch@...s.co.il>
To: Russell King <linux@...linux.org.uk>
Cc: netdev@...r.kernel.org, Andrew Lunn <andrew@...n.ch>,
Florian Fainelli <f.fainelli@...il.com>,
Heiner Kallweit <hkallweit1@...il.com>,
Baruch Siach <baruch@...s.co.il>
Subject: [PATCH] net: phy: marvell10g: hwmon support for 2110
Read the temperature sensor register from the correct location for the
88E2110 PHY. There is no enable/disable bit, so leave
mv3310_hwmon_config() for 88X3310 only.
Signed-off-by: Baruch Siach <baruch@...s.co.il>
---
This applies on top of "net: phy: marvell10g: disable temperature sensor
on 2110".
---
drivers/net/phy/marvell10g.c | 15 +++++++++++++--
1 file changed, 13 insertions(+), 2 deletions(-)
diff --git a/drivers/net/phy/marvell10g.c b/drivers/net/phy/marvell10g.c
index 7c4bc7347d0f..52d697563142 100644
--- a/drivers/net/phy/marvell10g.c
+++ b/drivers/net/phy/marvell10g.c
@@ -64,6 +64,8 @@ enum {
MV_PCS_CSSR1_SPD2_2500 = 0x0004,
MV_PCS_CSSR1_SPD2_10000 = 0x0000,
+ MV_PCS_TEMP = 0x8042,
+
/* These registers appear at 0x800X and 0xa00X - the 0xa00X control
* registers appear to set themselves to the 0x800X when AN is
* restarted, but status registers appear readable from either.
@@ -99,6 +101,14 @@ static umode_t mv3310_hwmon_is_visible(const void *data,
return 0;
}
+static int mv3310_hwmon_read_temp_reg(struct phy_device *phydev)
+{
+ if (phydev->drv->phy_id == MARVELL_PHY_ID_88X3310)
+ return phy_read_mmd(phydev, MDIO_MMD_VEND2, MV_V2_TEMP);
+ else /* MARVELL_PHY_ID_88E2110 */
+ return phy_read_mmd(phydev, MDIO_MMD_PCS, MV_PCS_TEMP);
+}
+
static int mv3310_hwmon_read(struct device *dev, enum hwmon_sensor_types type,
u32 attr, int channel, long *value)
{
@@ -111,7 +121,7 @@ static int mv3310_hwmon_read(struct device *dev, enum hwmon_sensor_types type,
}
if (type == hwmon_temp && attr == hwmon_temp_input) {
- temp = phy_read_mmd(phydev, MDIO_MMD_VEND2, MV_V2_TEMP);
+ temp = mv3310_hwmon_read_temp_reg(phydev);
if (temp < 0)
return temp;
@@ -191,7 +201,8 @@ static int mv3310_hwmon_probe(struct phy_device *phydev)
struct mv3310_priv *priv = dev_get_drvdata(&phydev->mdio.dev);
int i, j, ret;
- if (phydev->drv->phy_id != MARVELL_PHY_ID_88X3310)
+ if (phydev->drv->phy_id != MARVELL_PHY_ID_88X3310 &&
+ phydev->drv->phy_id != MARVELL_PHY_ID_88E2110)
return 0;
priv->hwmon_name = devm_kstrdup(dev, dev_name(dev), GFP_KERNEL);
--
2.25.1
Powered by blists - more mailing lists