[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <1587349055-4403-5-git-send-email-tanhuazhong@huawei.com>
Date: Mon, 20 Apr 2020 10:17:29 +0800
From: Huazhong Tan <tanhuazhong@...wei.com>
To: <davem@...emloft.net>
CC: <netdev@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<salil.mehta@...wei.com>, <yisen.zhuang@...wei.com>,
<linuxarm@...wei.com>, <kuba@...nel.org>,
Guojia Liao <liaoguojia@...wei.com>,
Huazhong Tan <tanhuazhong@...wei.com>
Subject: [PATCH V2 net-next 04/10] net: hns3: remove useless proto_support field in struct hclge_fd_cfg
From: Guojia Liao <liaoguojia@...wei.com>
proto_support field in struct hclge_fd_cfg shows what protocols
in flow direct table are supported now. It is unnecessary since
checking which one is unsupported will be more efficient,
so this patch removes it.
Signed-off-by: Guojia Liao <liaoguojia@...wei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@...wei.com>
---
drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 17 ++++++-----------
drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.h | 1 -
2 files changed, 6 insertions(+), 12 deletions(-)
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
index 999f056..e238a9d 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
@@ -4876,9 +4876,6 @@ static int hclge_init_fd_config(struct hclge_dev *hdev)
return -EOPNOTSUPP;
}
- hdev->fd_cfg.proto_support =
- TCP_V4_FLOW | UDP_V4_FLOW | SCTP_V4_FLOW | TCP_V6_FLOW |
- UDP_V6_FLOW | SCTP_V6_FLOW | IPV4_USER_FLOW | IPV6_USER_FLOW;
key_cfg = &hdev->fd_cfg.key_cfg[HCLGE_FD_STAGE_1];
key_cfg->key_sel = HCLGE_FD_KEY_BASE_ON_TUPLE,
key_cfg->inner_sipv6_word_en = LOW_2_WORDS;
@@ -4892,11 +4889,9 @@ static int hclge_init_fd_config(struct hclge_dev *hdev)
BIT(INNER_SRC_PORT) | BIT(INNER_DST_PORT);
/* If use max 400bit key, we can support tuples for ether type */
- if (hdev->fd_cfg.max_key_length == MAX_KEY_LENGTH) {
- hdev->fd_cfg.proto_support |= ETHER_FLOW;
+ if (hdev->fd_cfg.fd_mode == HCLGE_FD_MODE_DEPTH_2K_WIDTH_400B_STAGE_1)
key_cfg->tuple_active |=
BIT(INNER_DST_MAC) | BIT(INNER_SRC_MAC);
- }
/* roce_type is used to filter roce frames
* dst_vport is used to specify the rule
@@ -5397,7 +5392,8 @@ static int hclge_fd_check_ext_tuple(struct hclge_dev *hdev,
}
if (fs->flow_type & FLOW_MAC_EXT) {
- if (!(hdev->fd_cfg.proto_support & ETHER_FLOW))
+ if (hdev->fd_cfg.fd_mode !=
+ HCLGE_FD_MODE_DEPTH_2K_WIDTH_400B_STAGE_1)
return -EOPNOTSUPP;
if (is_zero_ether_addr(fs->h_ext.h_dest))
@@ -5413,21 +5409,20 @@ static int hclge_fd_check_spec(struct hclge_dev *hdev,
struct ethtool_rx_flow_spec *fs,
u32 *unused_tuple)
{
+ u32 flow_type;
int ret;
if (fs->location >= hdev->fd_cfg.rule_num[HCLGE_FD_STAGE_1])
return -EINVAL;
- if (!(fs->flow_type & hdev->fd_cfg.proto_support))
- return -EOPNOTSUPP;
-
if ((fs->flow_type & FLOW_EXT) &&
(fs->h_ext.data[0] != 0 || fs->h_ext.data[1] != 0)) {
dev_err(&hdev->pdev->dev, "user-def bytes are not supported\n");
return -EOPNOTSUPP;
}
- switch (fs->flow_type & ~(FLOW_EXT | FLOW_MAC_EXT)) {
+ flow_type = fs->flow_type & ~(FLOW_EXT | FLOW_MAC_EXT);
+ switch (flow_type) {
case SCTP_V4_FLOW:
case TCP_V4_FLOW:
case UDP_V4_FLOW:
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.h b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.h
index 71df23d..a58c262 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.h
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.h
@@ -580,7 +580,6 @@ struct hclge_fd_key_cfg {
struct hclge_fd_cfg {
u8 fd_mode;
u16 max_key_length; /* use bit as unit */
- u32 proto_support;
u32 rule_num[MAX_STAGE_NUM]; /* rule entry number */
u16 cnt_num[MAX_STAGE_NUM]; /* rule hit counter number */
struct hclge_fd_key_cfg key_cfg[MAX_STAGE_NUM];
--
2.7.4
Powered by blists - more mailing lists