lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date:   Wed, 29 Apr 2020 11:40:10 +0200
From:   "gregkh@...uxfoundation.org" <gregkh@...uxfoundation.org>
To:     "Badel, Laurent" <LaurentBadel@...on.com>
Cc:     "fugang.duan@....com" <fugang.duan@....com>,
        "netdev@...r.kernel.org" <netdev@...r.kernel.org>,
        "andrew@...n.ch" <andrew@...n.ch>,
        "f.fainelli@...il.com" <f.fainelli@...il.com>,
        "hkallweit1@...il.com" <hkallweit1@...il.com>,
        "linux@...linux.org.uk" <linux@...linux.org.uk>,
        "richard.leitner@...data.com" <richard.leitner@...data.com>,
        "davem@...emloft.net" <davem@...emloft.net>,
        "alexander.levin@...rosoft.com" <alexander.levin@...rosoft.com>,
        "Quette, Arnaud" <ArnaudQuette@...on.com>
Subject: Re: [PATCH 1/2] Revert commit
 1b0a83ac04e383e3bed21332962b90710fcf2828

On Wed, Apr 29, 2020 at 09:03:32AM +0000, Badel, Laurent wrote:
> ´╗┐Description: This patch reverts commit 1b0a83ac04e3 
> ("net: fec: add phy_reset_after_clk_enable() support")
> which produces undesirable behavior when PHY interrupts are enabled.
> 
> Rationale: the SMSC LAN8720 (and possibly other chips) is known
> to require a reset after the external clock is enabled. Calls to
> phy_reset_after_clk_enable() in fec_main.c have been introduced in 
> commit 1b0a83ac04e3 ("net: fec: add phy_reset_after_clk_enable() support")
> to handle the chip reset after enabling the clock.
> However, this breaks when interrupts are enabled because
> the reset reverts the configuration of the PHY interrupt mask to default
> (in addition it also reverts the "energy detect" mode setting).
> As a result the driver does not receive the link status change
> and other notifications resulting in loss of connectivity. 
> 
> Proposed solution: revert commit 1b0a83ac04e3 and bring the reset 
> before the PHY configuration by adding it to phy_init_hw() [phy_device.c].
> 
> Test results: using an iMX28-EVK-based board, these 2 patches successfully
> restore network interface functionality when interrupts are enabled.
> Tested using both linux-5.4.23 and latest mainline (5.6.0) kernels.
> 
> Fixes: 1b0a83ac04e383e3bed21332962b90710fcf2828 ("net: fec: add phy_reset_after_clk_enable() support")

Please read Documentation/process/submitting-patches.rst and the section
"2) Describe your changes" at the end, it says how to do lines like this
"properly".

thanks,

greg k-h

Powered by blists - more mailing lists