[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20200429201644.1144546-4-martin.blumenstingl@googlemail.com>
Date: Wed, 29 Apr 2020 22:16:36 +0200
From: Martin Blumenstingl <martin.blumenstingl@...glemail.com>
To: robh+dt@...nel.org, andrew@...n.ch, f.fainelli@...il.com,
linux-amlogic@...ts.infradead.org, devicetree@...r.kernel.org
Cc: jianxin.pan@...ogic.com, davem@...emloft.net,
netdev@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org,
Martin Blumenstingl <martin.blumenstingl@...glemail.com>
Subject: [PATCH RFC v2 03/11] net: stmmac: dwmac-meson8b: use FIELD_PREP instead of open-coding it
Use FIELD_PREP() to shift a value to the correct offset based on a
bitmask instead of open-coding the logic.
No functional changes.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@...glemail.com>
---
drivers/net/ethernet/stmicro/stmmac/dwmac-meson8b.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-meson8b.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-meson8b.c
index a3934ca6a043..c9ec0cb68082 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-meson8b.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-meson8b.c
@@ -5,6 +5,7 @@
* Copyright (C) 2016 Martin Blumenstingl <martin.blumenstingl@...glemail.com>
*/
+#include <linux/bitfield.h>
#include <linux/clk.h>
#include <linux/clk-provider.h>
#include <linux/device.h>
@@ -32,7 +33,6 @@
#define PRG_ETH0_CLK_M250_SEL_SHIFT 4
#define PRG_ETH0_CLK_M250_SEL_MASK GENMASK(4, 4)
-#define PRG_ETH0_TXDLY_SHIFT 5
#define PRG_ETH0_TXDLY_MASK GENMASK(6, 5)
/* divider for the result of m250_sel */
@@ -262,7 +262,8 @@ static int meson8b_init_prg_eth(struct meson8b_dwmac *dwmac)
PRG_ETH0_INVERTED_RMII_CLK, 0);
meson8b_dwmac_mask_bits(dwmac, PRG_ETH0, PRG_ETH0_TXDLY_MASK,
- tx_dly_val << PRG_ETH0_TXDLY_SHIFT);
+ FIELD_PREP(PRG_ETH0_TXDLY_MASK,
+ tx_dly_val));
/* Configure the 125MHz RGMII TX clock, the IP block changes
* the output automatically (= without us having to configure
--
2.26.2
Powered by blists - more mailing lists