Message-ID: <9fda861c-4b3b-9563-c6f3-32e4e1728b5e@electromag.com.au>
Date:   Wed, 29 Apr 2020 10:16:30 +0800
From:   Phil Reid <preid@...ctromag.com.au>
To:     netdev <netdev@...r.kernel.org>
Subject: Fwd: RE: FW: STP2811LF CFPO-5 10.000 MHz

G'day Mel,

Do we have DHL or UPS account?
Can't see it in:

S:\Admin\Freight & Shipping\Couriers\CourierBookings.xlsx



-------- Forwarded Message --------
Subject: 	RE: FW: STP2811LF CFPO-5 10.000 MHz
Date: 	Wed, 29 Apr 2020 01:56:30 +0000
From: 	Michelle Fu <Michelle.Fu@...on.com>
To: 	Phil Reid <preid@...ctromag.com.au>
CC: 	Hugh Tucker <Hugh.Tucker@...on.com>



Dear Phil

Please kindly check attachment updated order confirmation.

Firstly, Our payment term is 30days after you received invoice.

Secondly, This parts is delivered from Indian factory directly, so our ship terms Should be EXW Bangalore.

Last,  I’d like to double check Carrier Account with you. Could you please advise DHL or UPS Account for shipping arrangement? Indian factory only can use DHL 
present. So it is better to provide DHL Account.

Michelle Fu  / 符超慧

Account manager-Australia & New zealand

Rakon Shenzhen Office

A801, Aerospace  Building, 4019  Shennan Road, Shenzhen, 518048, China

Tel: +86 755 8283 5989 Ext.8003 | Mob  +86 15820418466

-----Original Message-----
From: Phil Reid <preid@...ctromag.com.au>
Sent: Wednesday, April 29, 2020 8:57 AM
To: Michelle Fu <Michelle.Fu@...on.com>
Cc: Hugh Tucker <Hugh.Tucker@...on.com>
Subject: Re: FW: STP2811LF CFPO-5 10.000 MHz

G'day Michelle,

Thanks.

Just want to check on the payment terms.

Do you want pre payment of this?

Regards

Phil

On 28/04/2020 16:09, Michelle Fu wrote:

  > Dear Phil

  >

  > Please kindly find attachment order confirmation. Thank you very much!

  >

  >

  >

  >

  >

  > Michelle Fu  / 符超慧

  > Account manager-Australia & New zealand Rakon Shenzhen Office A801,

  > Aerospace  Building, 4019  Shennan Road, Shenzhen, 518048, China

  > Tel: +86 755 8283 5989 Ext.8003 | Mob  +86 15820418466

  >

  >

  > -----Original Message-----

  > From: Phil Reid <preid@...ctromag.com.au <mailto:preid@...ctromag.com.au>>

  > Sent: Thursday, April 2, 2020 11:38 AM

  > To: Frederic VITTRANT <Frederic.VITTRANT@...on.com <mailto:Frederic.VITTRANT@...on.com>>; Hugh Tucker

  > <Hugh.Tucker@...on.com <mailto:Hugh.Tucker@...on.com>>

  > Cc: Michelle Fu <Michelle.Fu@...on.com <mailto:Michelle.Fu@...on.com>>

  > Subject: Re: FW: STP2811LF CFPO-5 10.000 MHz

  >

  > G'day Frederic / Hugh,

  >

  > Ok, lets go with the revised spec of 0-4V for the EFC.

  >

  > Thanks

  > Phil

  >

  > On 1/04/2020 17:20, Frederic VITTRANT wrote:

  >> Hello Phil,

  >>

  >> Absolute max rating for the pin would not change.

  >>

  >> However, the EFC function works with a max frequency offset setting set at 4.0V for the control voltage.

  >>

  >> We did quote an original lead-time of 16 to 20 weeks – Keeping the

  >> 5.0V for EFC function would mean an additional 6 weeks min since we would also need to revisit some production test jigs and qualify the lot.

  >>

  >> I would strongly recommend we use the 0 to 4V range for EFC here.

  >>

  >> Once approved, I would issue a corrected version of the datasheet.

  >>

  >> Sorry about this.

  >>

  >> Best regards,

  >>

  >> Frederic Vittrant

  >>

  >> cid:image001.png@...5631F.EA935DC0

  >>

  >> Frédéric Vittrant

  >>

  >> *OCXO Product Line Manager *

  >>

  >> **

  >>

  >> *Rakon France / Business Unit Telecom* Parc d’affaires « Carré 92 »

  >>

  >> Bâtiment G3

  >>

  >> 10 Avenue des Louvresses

  >>

  >> 92230 Gennevilliers

  >> LLI +33 (0) 1 81 93 31 70

  >>

  >> Mobile +33 (0) 7 63 44 08 59

  >>

  >> *_frederic.vittrant@...on.com <mailto:*_frederic.vittrant@...on.com>

  >> <http://@...on.com>_******I****www.rakon.com

  >> <http://www.rakon.com/>***

  >>

  >> This message together with any attachments contains confidential information and may be subject to privilege.

  >>

  >> If you are not the intended recipient you may not distribute it in

  >> any way, you must notify the sender immediately

  >>

  >> and delete any copies of the message along with its attachments.

  >>

  >> *From:*Phil Reid [mailto:preid@...ctromag.com.au]

  >> *Sent:* Wednesday, April 1, 2020 2:52 AM

  >> *To:* Hugh Tucker <Hugh.Tucker@...on.com <mailto:Hugh.Tucker@...on.com>>

  >> *Cc:* Michelle Fu <Michelle.Fu@...on.com <mailto:Michelle.Fu@...on.com>>; Frederic VITTRANT

  >> <Frederic.VITTRANT@...on.com <mailto:Frederic.VITTRANT@...on.com>>

  >> *Subject:* Re: FW: STP2811LF CFPO-5 10.000 MHz

  >>

  >> On 1/04/2020 07:40, Hugh Tucker wrote:

  >>

  >>      Hello Phil,

  >>

  >>      I've been contacted by our engineering team requesting a slight

  >> spec relaxation to the STP3544. Specifically, it relates to clause 5

  >>

  >>      The requested change is:

  >>

  >>      ·The design team has been working with the production team on STP3544 order.

  >>

  >>      ·One issue was just uncovered with EFC control voltage – we would need to have its range from 0 to 4V instead of 0 to 5V.

  >>

  >>      ·This was overlooked and is causing issues.

  >>

  >>      ·Is this change  acceptable?

  >>

  >>      ·We could accommodate a 0 to 5 V range but this would cause additional delays as we would need to do changes on the production test tools in addition to

  >>      updating the design.

  >>

  >>      ·

  >>

  >>      Do you think this requested change is acceptable in your application?

  >>

  >>

  >> G'day Hugh,

  >>

  >> Would the absolute max range of the pin change?

  >> Ensuring it is not over-driven above 4V could prove difficult to

  >> manage across some of our products.

  >>

  >> How long a delay are we talking?

  >>

  >>

  >> --

  >>

  >> Regards

  >>

  >> Phil Reid

  >>

  >> ElectroMagnetic Imaging Technology Pty Ltd

  >>

  >> Development of Geophysical Instrumentation & Software

  >>

  >> www.electromag.com.au <http://www.electromag.com.au>  <http://www.electromag.com.au>

  >>

  >> 3 The Avenue, Midland WA 6056, AUSTRALIA

  >>

  >> Ph: +61 8 9250 8100

  >>

  >> Fax: +61 8 9250 7100

  >>

  >> Email:preid@...ctromag.com.au  <mailto:preid@...ctromag.com.au>

  >>

  >

  >

  > --

  > Regards

  > Phil Reid

  >

  > ElectroMagnetic Imaging Technology Pty Ltd Development of Geophysical

  > Instrumentation & Software www.electromag.com.au <http://www.electromag.com.au>

  >

  > 3 The Avenue, Midland WA 6056, AUSTRALIA

  > Ph: +61 8 9250 8100

  > Fax: +61 8 9250 7100

  > Email: preid@...ctromag.com.au <mailto:preid@...ctromag.com.au>

  >

--

Regards

Phil Reid

ElectroMagnetic Imaging Technology Pty Ltd Development of Geophysical Instrumentation & Software www.electromag.com.au <http://www.electromag.com.au>

3 The Avenue, Midland WA 6056, AUSTRALIA

Ph: +61 8 9250 8100

Fax: +61 8 9250 7100

Email: preid@...ctromag.com.au <mailto:preid@...ctromag.com.au>


Download attachment "1119695.pdf" of type "application/pdf" (1201352 bytes)

Powered by blists - more mailing lists