netdev - Re: Don't initialise ports with no PHY

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [day] [month] [year] [list]

Message-Id: <1963BFFC-34FD-4BDC-B277-838FB332D7BF@xenosoft.de>
Date:   Fri, 1 May 2020 07:35:58 +0200
From:   Christian Zigotzky <chzigotzky@...osoft.de>
To:     Darren Stevens <darren@...vens-zone.net>
Cc:     Andrew Lunn <andrew@...n.ch>, "R.T.Dickinson" <rtd2@...a.co.nz>,
        netdev@...r.kernel.org, mad skateman <madskateman@...il.com>,
        linuxppc-dev@...ts.ozlabs.org
Subject: Re: Don't initialise ports with no PHY


> On 30. Apr 2020, at 23:36, Darren Stevens <darren@...vens-zone.net> wrote:
> 
> Hello Christian
> 
>> On 29/04/2020, Christian Zigotzky wrote:
>> 
>> 
>>>> On 29. Apr 2020, at 17:22, Andrew Lunn <andrew@...n.ch> wrote:
>>> 
>>> ?On Wed, Apr 29, 2020 at 03:55:28PM +0200, Christian Zigotzky wrote:
>>>> Hi Andrew,
>>>> 
>>>> You can find some dtb and source files in our kernel package.
>>>> 
>>>> Download: http://www.xenosoft.de/linux-image-5.7-rc3-X1000_X5000.tar.gz
>>> 
>>> I have the tarball. Are we talking about
>>> 
>>> 
> linux-image-5.7-rc3-X1000_X5000/X5000_and_QEMU_e5500/dtbs/X5000_20/cyrus.eth.dtb
>> 
>>> I don't see any status = "disabled"; in the blob. So i would expect
>>> the driver to probe.
> 
> No, the vendor never added that to them.
> 
>> Yes, that's correct but maybe Darren uses another dtb file.
>> 
>> @Darren
>> Which dtb file do you use?
> 
> My current one attached, including updated cyrus_p5020.dts & p5020si-pre.dtsi
> which I'm preparing patches for.
> 
> Christian, build an unmodified kernel, select board level reset or power off,
> then both the GPIO drivers.
> Then under LED Support: GPIO connected LED's and triggers -> disk activity
> 
> I think you still have a 5020 don't you? I'll look at 5040 later (I'll need
> someone to test)
> 
> Regards
> Darren
> <cyrus-dts.zip>

Darren

I use a 5040 currently.

Thanks
Christian