| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Tue, 5 May 2020 18:01:06 +0300
From: Grygorii Strashko <grygorii.strashko@...com>
To: Rob Herring <robh@...nel.org>
CC: Richard Cochran <richardcochran@...il.com>,
Murali Karicheri <m-karicheri2@...com>,
"David S. Miller" <davem@...emloft.net>,
Tero Kristo <t-kristo@...com>,
Lokesh Vutla <lokeshvutla@...com>, <netdev@...r.kernel.org>,
Sekhar Nori <nsekhar@...com>, <linux-kernel@...r.kernel.org>,
<devicetree@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>, Nishanth Menon <nm@...com>
Subject: Re: [PATCH net-next 1/7] dt-binding: ti: am65x: document common
platform time sync cpts module
On 05/05/2020 07:04, Rob Herring wrote:
> On Fri, May 01, 2020 at 11:50:05PM +0300, Grygorii Strashko wrote:
>> Document device tree bindings for TI AM654/J721E SoC The Common Platform
>> Time Sync (CPTS) module. The CPTS module is used to facilitate host control
>> of time sync operations. Main features of CPTS module are:
>> - selection of multiple external clock sources
>> - 64-bit timestamp mode in ns with ppm and nudge adjustment.
>> - control of time sync events via interrupt or polling
>> - hardware timestamp of ext. events (HWx_TS_PUSH)
>> - periodic generator function outputs (TS_GENFx)
>> - PPS in combination with timesync router
>> - Depending on integration it enables compliance with the IEEE 1588-2008
>> standard for a precision clock synchronization protocol, Ethernet Enhanced
>> Scheduled Traffic Operations (CPTS_ESTFn) and PCIe Subsystem Precision Time
>> Measurement (PTM).
>>
>> Signed-off-by: Grygorii Strashko <grygorii.strashko@...com>
>> ---
>> .../bindings/net/ti,k3-am654-cpsw-nuss.yaml | 7 +
>> .../bindings/net/ti,k3-am654-cpts.yaml | 152 ++++++++++++++++++
>> 2 files changed, 159 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/net/ti,k3-am654-cpts.yaml
>>
>> diff --git a/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml b/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml
>> index 78bf511e2892..0f3fde45e200 100644
>> --- a/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml
>> +++ b/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml
>> @@ -144,6 +144,13 @@ patternProperties:
>> description:
>> CPSW MDIO bus.
>>
>> + "^cpts$":
ok
>
> Fixed strings go under 'properties'.
>
>> + type: object
>> + allOf:
>> + - $ref: "ti,am654-cpts.yaml#"
>> + description:
>> + CPSW Common Platform Time Sync (CPTS) module.
>> +
>> required:
>> - compatible
>> - reg
>> diff --git a/Documentation/devicetree/bindings/net/ti,k3-am654-cpts.yaml b/Documentation/devicetree/bindings/net/ti,k3-am654-cpts.yaml
>> new file mode 100644
>> index 000000000000..1b535d41e5c6
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/net/ti,k3-am654-cpts.yaml
>> @@ -0,0 +1,152 @@
>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
>> +%YAML 1.2
>> +---
>> +$id: http://devicetree.org/schemas/net/ti,am654-cpts.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: The TI AM654x/J721E Common Platform Time Sync (CPTS) module Device Tree Bindings
>> +
>> +maintainers:
>> + - Grygorii Strashko <grygorii.strashko@...com>
>> + - Sekhar Nori <nsekhar@...com>
>> +
>> +description: |+
>> + The TI AM654x/J721E CPTS module is used to facilitate host control of time
>> + sync operations.
>> + Main features of CPTS module are
>> + - selection of multiple external clock sources
>> + - Software control of time sync events via interrupt or polling
>> + - 64-bit timestamp mode in ns with PPM and nudge adjustment.
>> + - hardware timestamp push inputs (HWx_TS_PUSH)
>> + - timestamp counter compare output (TS_COMP)
>> + - timestamp counter bit output (TS_SYNC)
>> + - periodic Generator function outputs (TS_GENFx)
>> + - Ethernet Enhanced Scheduled Traffic Operations (CPTS_ESTFn) (TSN)
>> + - external hardware timestamp push inputs (HWx_TS_PUSH) timestamping
>> +
>> + Depending on integration it enables compliance with the IEEE 1588-2008
>> + standard for a precision clock synchronization protocol, Ethernet Enhanced
>> + Scheduled Traffic Operations (CPTS_ESTFn) and PCIe Subsystem Precision Time
>> + Measurement (PTM).
>> +
>> + TI AM654x/J721E SoCs has several similar CPTS modules integrated into the
>> + different parts of the system which could be synchronized with each other
>> + - Main CPTS
>> + - MCU CPSW CPTS with IEEE 1588-2008 support
>> + - PCIe subsystem CPTS for PTM support
>> +
>> + Depending on CPTS module integration and when CPTS is integral part of
>> + another module (MCU CPSW for example) "compatible" and "reg" can
>> + be omitted - parent module is fully responsible for CPTS enabling and
>> + configuration.
>
> That's fine, but you should still have compatible and reg.
I'll add reg as below. But compatible is an issue, because
k3-am654-cpsw-nuss call of_platform_populate() to create mdio device.
But for CPTS I do not want to create device as k3-am654-cpsw-nuss uses direct
function calls to CPTS.
Will it be correct to switch to of_platform_device_create() instead of
of_platform_populate()?
>
>> +
>> +properties:
>> + $nodename:
>> + pattern: "^cpts(@.*|-[0-9a-f])*$"
>> +
>> + compatible:
>> + oneOf:
>> + - const: ti,am65-cpts
>> + - const: ti,j721e-cpts
>> +
>> + reg:
>> + maxItems: 1
>> + description:
>> + The physical base address and size of CPTS IO range
>
> Wrong indentation.
>
>> +
>> + reg-names:
>> + items:
>> + - const: cpts
>
> Don't really need *-names when there's only one and you haven't picked
> very meaningful names.
Could I keep it if you don't mind?
>
>> +
>> + clocks:
>> + description: CPTS reference clock
>> +
>> + clock-names:
>> + items:
>> + - const: cpts
>> +
>> + interrupts-extended:
>
> Use 'interrupts' here, the tooling will fixup things to allow both.
>
[...]
>> +
>> +examples:
>> + - |
>> + #include <dt-bindings/interrupt-controller/irq.h>
>> + #include <dt-bindings/interrupt-controller/arm-gic.h>
>> +
>> + cpts@...d0000 {
>> + compatible = "ti,am65-cpts";
>> + reg = <0x0 0x310d0000 0x0 0x400>;
>> + reg-names = "cpts";
>> + clocks = <&main_cpts_mux>;
>> + clock-names = "cpts";
>> + interrupts-extended = <&k3_irq 163 0 IRQ_TYPE_LEVEL_HIGH>;
>> + interrupt-names = "cpts";
>> + ti,cpts-periodic-outputs = <6>;
>> + ti,cpts-ext-ts-inputs = <8>;
>> +
>> + main_cpts_mux: refclk-mux {
>> + #clock-cells = <0>;
>> + clocks = <&k3_clks 118 5>, <&k3_clks 118 11>,
>> + <&k3_clks 157 91>, <&k3_clks 157 77>,
>> + <&k3_clks 157 102>, <&k3_clks 157 80>,
>> + <&k3_clks 120 3>, <&k3_clks 121 3>;
>> + assigned-clocks = <&main_cpts_mux>;
>> + assigned-clock-parents = <&k3_clks 118 11>;
>> + };
>> + };
>> + - |
>> +
>> + cpts {
>> + clocks = <&k3_clks 18 2>;
>> + clock-names = "cpts";
>> + interrupts-extended = <&gic500 GIC_SPI 858 IRQ_TYPE_LEVEL_HIGH>;
>> + interrupt-names = "cpts";
>> + ti,cpts-ext-ts-inputs = <4>;
>> + ti,cpts-periodic-outputs = <2>;
>
> How is this example accessed?
I'll move it in .../bindings/net/ti,k3-am654-cpsw-nuss.yaml as below
--- a/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml
+++ b/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml
@@ -143,7 +143,7 @@ patternProperties:
description:
CPSW MDIO bus.
- "^cpts$":
+ "^cpts(@.*|-[0-9a-f])*$":
type: object
allOf:
- $ref: "ti,am654-cpts.yaml#"
@@ -170,6 +170,8 @@ examples:
#include <dt-bindings/pinctrl/k3.h>
#include <dt-bindings/soc/ti,sci_pm_domain.h>
#include <dt-bindings/net/ti-dp83867.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
mcu_cpsw: ethernet@...00000 {
compatible = "ti,am654-cpsw-nuss";
@@ -228,4 +230,14 @@ examples:
ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
};
};
+
+ cpts@...00 {
+ reg = <0x0 0x3d000 0x0 0x400>;
+ clocks = <&k3_clks 18 2>;
+ clock-names = "cpts";
+ interrupts-extended = <&gic500 GIC_SPI 858 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "cpts";
+ ti,cpts-ext-ts-inputs = <4>;
+ ti,cpts-periodic-outputs = <2>;
+ };
};
diff --git a/Documentation/devicetree/bindings/net/ti,k3-am654-cpts.yaml b/Documentation/devicetree/bindings/net/ti,k3-am654-cpts.yaml
index 1b535d41e5c6..1f7fdbab3191 100644
--- a/Documentation/devicetree/bindings/net/ti,k3-am654-cpts.yaml
+++ b/Documentation/devicetree/bindings/net/ti,k3-am654-cpts.yaml
@@ -140,13 +140,3 @@ examples:
assigned-clock-parents = <&k3_clks 118 11>;
};
};
- - |
-
- cpts {
- clocks = <&k3_clks 18 2>;
- clock-names = "cpts";
- interrupts-extended = <&gic500 GIC_SPI 858 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "cpts";
- ti,cpts-ext-ts-inputs = <4>;
- ti,cpts-periodic-outputs = <2>;
- };
--
Best regards,
grygorii
Powered by blists - more mailing lists