lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Date:   Tue,  5 May 2020 12:01:54 +0800
From:   Kai-Heng Feng <kai.heng.feng@...onical.com>
To:     jeffrey.t.kirsher@...el.com
Cc:     Kai-Heng Feng <kai.heng.feng@...onical.com>,
        Aaron Brown <aaron.f.brown@...el.com>,
        "David S. Miller" <davem@...emloft.net>,
        intel-wired-lan@...ts.osuosl.org (moderated list:INTEL ETHERNET DRIVERS),
        netdev@...r.kernel.org (open list:NETWORKING DRIVERS),
        linux-kernel@...r.kernel.org (open list)
Subject: [PATCH v2] igb: Report speed and duplex as unknown when device is runtime suspended

igb device gets runtime suspended when there's no link partner. We can't
get correct speed under that state:
$ cat /sys/class/net/enp3s0/speed
1000

In addition to that, an error can also be spotted in dmesg:
[  385.991957] igb 0000:03:00.0 enp3s0: PCIe link lost

Since device can only be runtime suspended when there's no link partner,
we can skip reading register and let the following logic set speed and
duplex with correct status.

The more generic approach will be wrap get_link_ksettings() with begin()
and complete() callbacks. However, for this particular issue, begin()
calls igb_runtime_resume() , which tries to rtnl_lock() while the lock
is already hold by upper ethtool layer.

So let's take this approach until the igb_runtime_resume() no longer
needs to hold rtnl_lock.

Cc: Jeff Kirsher <jeffrey.t.kirsher@...el.com>
Cc: Aaron Brown <aaron.f.brown@...el.com>
Suggested-by: Alexander Duyck <alexander.duyck@...il.com>
Signed-off-by: Kai-Heng Feng <kai.heng.feng@...onical.com>
---
v2:
 - Don't early return the routine so other info can be set.

 drivers/net/ethernet/intel/igb/igb_ethtool.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/intel/igb/igb_ethtool.c b/drivers/net/ethernet/intel/igb/igb_ethtool.c
index 39d3b76a6f5d..2cd003c5ad43 100644
--- a/drivers/net/ethernet/intel/igb/igb_ethtool.c
+++ b/drivers/net/ethernet/intel/igb/igb_ethtool.c
@@ -143,7 +143,8 @@ static int igb_get_link_ksettings(struct net_device *netdev,
 	u32 speed;
 	u32 supported, advertising;
 
-	status = rd32(E1000_STATUS);
+	status = pm_runtime_suspended(&adapter->pdev->dev) ?
+		 0 : rd32(E1000_STATUS);
 	if (hw->phy.media_type == e1000_media_type_copper) {
 
 		supported = (SUPPORTED_10baseT_Half |
-- 
2.17.1

Powered by blists - more mailing lists