netdev - Re: [PATCH v1] dt-bindings: net: nxp,tja11xx: rework validation support

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Wed, 6 May 2020 07:11:34 +0200
From:   Oleksij Rempel <o.rempel@...gutronix.de>
To:     Andrew Lunn <andrew@...n.ch>
Cc:     Florian Fainelli <f.fainelli@...il.com>,
        Heiner Kallweit <hkallweit1@...il.com>,
        Mark Rutland <mark.rutland@....com>,
        Rob Herring <robh+dt@...nel.org>,
        Pengutronix Kernel Team <kernel@...gutronix.de>,
        linux-kernel@...r.kernel.org,
        "David S. Miller" <davem@...emloft.net>, netdev@...r.kernel.org,
        Marek Vasut <marex@...x.de>, David Jander <david@...tonic.nl>,
        devicetree@...r.kernel.org
Subject: Re: [PATCH v1] dt-bindings: net: nxp,tja11xx: rework validation
 support

On Tue, May 05, 2020 at 04:01:27PM +0200, Andrew Lunn wrote:
> On Tue, May 05, 2020 at 12:42:15PM +0200, Oleksij Rempel wrote:
> > To properly identify this node, we need to use ethernet-phy-id0180.dc80.
> > And add missing required properties.
> > 
> > Signed-off-by: Oleksij Rempel <o.rempel@...gutronix.de>
> > ---
> >  .../devicetree/bindings/net/nxp,tja11xx.yaml  | 55 ++++++++++++-------
> >  1 file changed, 35 insertions(+), 20 deletions(-)
> > 
> > diff --git a/Documentation/devicetree/bindings/net/nxp,tja11xx.yaml b/Documentation/devicetree/bindings/net/nxp,tja11xx.yaml
> > index 42be0255512b3..cc322107a24a2 100644
> > --- a/Documentation/devicetree/bindings/net/nxp,tja11xx.yaml
> > +++ b/Documentation/devicetree/bindings/net/nxp,tja11xx.yaml
> > @@ -1,4 +1,4 @@
> > -# SPDX-License-Identifier: GPL-2.0+
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> >  %YAML 1.2
> >  ---
> >  $id: http://devicetree.org/schemas/net/nxp,tja11xx.yaml#
> > @@ -12,44 +12,59 @@ maintainers:
> >    - Heiner Kallweit <hkallweit1@...il.com>
> >  
> >  description:
> > -  Bindings for NXP TJA11xx automotive PHYs
> > +  Bindings for the NXP TJA1102 automotive PHY. This is a dual PHY package where
> > +  only the first PHY has global configuration register and HW health
> > +  monitoring.
> >  
> > -allOf:
> > -  - $ref: ethernet-phy.yaml#
> > +properties:
> > +  compatible:
> > +    const: ethernet-phy-id0180.dc80
> > +    description: ethernet-phy-id0180.dc80 used for TJA1102 PHY
> > +
> > +  reg:
> > +    minimum: 0
> > +    maximum: 14
> > +    description:
> > +      The PHY address of the parent PHY.
> 
> Hi Oleksij
> 
> reg is normally 0 to 31, since that is the address range for MDIO. 
> Did you use 14 here because of what strapping allows?

Yes. Only BITs 1:3 are configurable. BIT(0) is always 0 for the PHY0 and 1
for the PHY1

> > +required:
> > +  - compatible
> > +  - reg
> > +  - '#address-cells'
> > +  - '#size-cells'
> 
> So we have two different meanings of 'required' here.
> 
> One meaning is the code requires it. compatible is not required, the
> driver will correctly be bind to the device based on its ID registers.
> Is reg also required by the code?
> 
> The second meaning is about keeping the yaml verifier happy. It seems
> like compatible is needed for the verifier. Is reg also required? We
> do recommend having reg, but the generic code does not require it.

reg is used by:
tja1102_p0_probe()
  tja1102_p1_register()
    of_mdio_parse_addr()

But this is required for the slave PHY. I assume the reg can be
optional for the master PHY. Should I?

Regards,
Oleksij
-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

Download attachment "signature.asc" of type "application/pgp-signature" (834 bytes)