lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date:   Fri, 08 May 2020 13:09:41 +0200
From:   Jesper Dangaard Brouer <brouer@...hat.com>
To:     sameehj@...zon.com
Cc:     Jesper Dangaard Brouer <brouer@...hat.com>, netdev@...r.kernel.org,
        bpf@...r.kernel.org,
        Toke Høiland-Jørgensen <toke@...hat.com>,
        Daniel Borkmann <borkmann@...earbox.net>,
        Alexei Starovoitov <alexei.starovoitov@...il.com>,
        "David S. Miller" <davem@...emloft.net>,
        John Fastabend <john.fastabend@...il.com>,
        Alexander Duyck <alexander.duyck@...il.com>,
        Jeff Kirsher <jeffrey.t.kirsher@...el.com>,
        David Ahern <dsahern@...il.com>,
        Ilias Apalodimas <ilias.apalodimas@...aro.org>,
        Lorenzo Bianconi <lorenzo@...nel.org>,
        Saeed Mahameed <saeedm@...lanox.com>,
        Tariq Toukan <tariqt@...lanox.com>
Subject: [PATCH net-next v3 11/33] dpaa2-eth: add XDP frame size

The dpaa2-eth driver reserve some headroom used for hardware and
software annotation area in RX/TX buffers. Thus, xdp.data_hard_start
doesn't start at page boundary.

When XDP is configured the area reserved via dpaa2_fd_get_offset(fd) is
448 bytes of which XDP have reserved 256 bytes. As frame_sz is
calculated as an offset from xdp_buff.data_hard_start, an adjust from
the full PAGE_SIZE == DPAA2_ETH_RX_BUF_RAW_SIZE.

When doing XDP_REDIRECT, the driver doesn't need this reserved headroom
any-longer and allows xdp_do_redirect() to use it. This is an advantage
for the drivers own ndo-xdp_xmit, as it uses part of this headroom for
itself.  Patch also adjust frame_sz in this case.

The driver cannot support XDP data_meta, because it uses the headroom
just before xdp.data for struct dpaa2_eth_swa (DPAA2_ETH_SWA_SIZE=64),
when transmitting the packet. When transmitting a xdp_frame in
dpaa2_eth_xdp_xmit_frame (call via ndo_xdp_xmit) is uses this area to
store a pointer to xdp_frame and dma_size, which is used in TX
completion (free_tx_fd) to return frame via xdp_return_frame().

Cc: Ioana Radulescu <ruxandra.radulescu@....com>
Signed-off-by: Jesper Dangaard Brouer <brouer@...hat.com>
---
 drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c |    7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c b/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c
index 0f3e842a4fd6..8c8d95aa1dfd 100644
--- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c
+++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c
@@ -331,6 +331,9 @@ static u32 run_xdp(struct dpaa2_eth_priv *priv,
 	xdp_set_data_meta_invalid(&xdp);
 	xdp.rxq = &ch->xdp_rxq;
 
+	xdp.frame_sz = DPAA2_ETH_RX_BUF_RAW_SIZE -
+		(dpaa2_fd_get_offset(fd) - XDP_PACKET_HEADROOM);
+
 	xdp_act = bpf_prog_run_xdp(xdp_prog, &xdp);
 
 	/* xdp.data pointer may have changed */
@@ -366,7 +369,11 @@ static u32 run_xdp(struct dpaa2_eth_priv *priv,
 		dma_unmap_page(priv->net_dev->dev.parent, addr,
 			       DPAA2_ETH_RX_BUF_SIZE, DMA_BIDIRECTIONAL);
 		ch->buf_count--;
+
+		/* Allow redirect use of full headroom */
 		xdp.data_hard_start = vaddr;
+		xdp.frame_sz = DPAA2_ETH_RX_BUF_RAW_SIZE;
+
 		err = xdp_do_redirect(priv->net_dev, &xdp, xdp_prog);
 		if (unlikely(err))
 			ch->stats.xdp_drop++;


Powered by blists - more mailing lists