| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <b73c6c4a-a8c8-96fb-54fc-fb1de9bd098a@pp.inet.fi>
Date: Mon, 11 May 2020 16:09:51 +0300
From: Lauri Jakku <lauri.jakku@...inet.fi>
To: Heiner Kallweit <hkallweit1@...il.com>
Cc: Leon Romanovsky <leon@...nel.org>, netdev@...r.kernel.org,
nic_swsd@...ltek.com
Subject: Re: NET: r8168/r8169 identifying fix
On 3.5.2020 11.33, Heiner Kallweit wrote:
> On 03.05.2020 04:28, Lauri Jakku wrote:
>> Hi,
>>
>> On 3.5.2020 4.34, Lauri Jakku wrote:
>>> Hi,
>>>
>>>
>>> On 3.5.2020 3.11, Lauri Jakku wrote:
>>>> On 3.5.2020 2.15, Heiner Kallweit wrote:
>>>>> On 03.05.2020 00:42, Lauri Jakku wrote:
>>>>>> Hi,
>>>>>>
>>>>>>
>>>>>>
>>>>>> On 2.5.2020 20.56, Lauri Jakku wrote:
>>>>>>> Hi,
>>>>>>>
>>>>>>> On 1.5.2020 22.12, Lauri Jakku wrote:
>>>>>>>> Hi,
>>>>>>>>
>>>>>>>>
>>>>>>>> On 19.4.2020 19.00, Heiner Kallweit wrote:
>>>>>>>>> On 19.04.2020 18:49, Lauri Jakku wrote:
>>>>>>>>>> Hi,
>>>>>>>>>>
>>>>>>>>>> On 19.4.2020 18.09, Lauri Jakku wrote:
>>>>>>>>>>> Hi,
>>>>>>>>>>>
>>>>>>>>>>> On 18.4.2020 21.46, Lauri Jakku wrote:
>>>>>>>>>>>
>>>>>>>>>>>> Hi,
>>>>>>>>>>>>
>>>>>>>>>>>> On 18.4.2020 14.06, Lauri Jakku wrote:
>>>>>>>>>>>>> Hi,
>>>>>>>>>>>>>
>>>>>>>>>>>>> On 17.4.2020 10.30, Lauri Jakku wrote:
>>>>>>>>>>>>>> Hi,
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> On 17.4.2020 9.23, Lauri Jakku wrote:
>>>>>>>>>>>>>>> On 16.4.2020 23.50, Heiner Kallweit wrote:
>>>>>>>>>>>>>>>> On 16.04.2020 22:38, Lauri Jakku wrote:
>>>>>>>>>>>>>>>>> Hi
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> On 16.4.2020 23.10, Lauri Jakku wrote:
>>>>>>>>>>>>>>>>>> On 16.4.2020 23.02, Heiner Kallweit wrote:
>>>>>>>>>>>>>>>>>>> On 16.04.2020 21:58, Lauri Jakku wrote:
>>>>>>>>>>>>>>>>>>>> Hi,
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> On 16.4.2020 21.37, Lauri Jakku wrote:
>>>>>>>>>>>>>>>>>>>>> Hi,
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> On 16.4.2020 21.26, Heiner Kallweit wrote:
>>>>>>>>>>>>>>>>>>>>>> On 16.04.2020 13:30, Lauri Jakku wrote:
>>>>>>>>>>>>>>>>>>>>>>> Hi,
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>> 5.6.3-2-MANJARO: stock manjaro kernel, without modifications --> network does not work
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>> 5.6.3-2-MANJARO-lja: No attach check, modified kernel (r8169 mods only) --> network does not work
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>> 5.6.3-2-MANJARO-with-the-r8169-patch: phy patched + r8169 mods -> devices show up ok, network works
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>> All different initcpio's have realtek.ko in them.
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>> Thanks for the logs. Based on the logs you're presumable affected by a known BIOS bug.
>>>>>>>>>>>>>>>>>>>>>> Check bug tickets 202275 and 207203 at bugzilla.kernel.org.
>>>>>>>>>>>>>>>>>>>>>> In the first referenced tickets it's about the same mainboard (with earlier BIOS version).
>>>>>>>>>>>>>>>>>>>>>> BIOS on this mainboard seems to not initialize the network chip / PHY correctly, it reports
>>>>>>>>>>>>>>>>>>>>>> a random number as PHY ID, resulting in no PHY driver being found.
>>>>>>>>>>>>>>>>>>>>>> Enable "Onboard LAN Boot ROM" in the BIOS, and your problem should be gone.
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> OK, I try that, thank you :)
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> It seems that i DO have the ROM's enabled, i'm now testing some mutex guard for phy state and try to use it as indicator
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> that attach has been done. One thing i've noticed is that driver needs to be reloaded to allow traffic (ie. ping works etc.)
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> All that shouldn't be needed. Just check with which PHY ID the PHY comes up.
>>>>>>>>>>>>>>>>>>> And what do you mean with "it seems"? Is the option enabled or not?
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> I do have ROM's enabled, and it does not help with my issue.
>>>>>>>>>>>>>>>> Your BIOS is a beta version, downgrading to F7 may help. Then you have the same
>>>>>>>>>>>>>>>> mainboard + BIOS as the user who opened bug ticket 202275.
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> huhti 17 09:01:49 MinistryOfSillyWalk kernel: r8169 0000:03:00.0: PHY version: 0xc2077002
>>>>>>>>>>>>>>> huhti 17 09:01:49 MinistryOfSillyWalk kernel: r8169 0000:03:00.0: MAC version: 23
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> ....
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> huhti 17 09:03:29 MinistryOfSillyWalk kernel: r8169 0000:02:00.0: PHY version: 0x1cc912
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> huhti 17 09:03:29 MinistryOfSillyWalk kernel: r8169 0000:02:00.0: MAC version: 23
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> .. after module unload & load cycle:
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> huhti 17 09:17:35 MinistryOfSillyWalk kernel: r8169 0000:02:00.0: PHY version: 0x1cc912
>>>>>>>>>>>>>>> huhti 17 09:17:35 MinistryOfSillyWalk kernel: r8169 0000:02:00.0: MAC version: 23
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> it seem to be the case that the phy_id chances onetime, then stays the same. I'll do few shutdowns and see
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> is there a pattern at all .. next i'm going to try how it behaves, if i read mac/phy versions twice on MAC version 23.
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> The BIOS downgrade: I'd like to solve this without downgrading BIOS. If I can't, then I'll do systemd-service that
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> reloads r8169 driver at boot, cause then network is just fine.
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>> What i've gathered samples now, there is three values for PHY ID:
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> [sillyme@...istryOfSillyWalk KernelStuff]$ sudo journalctl |grep "PHY ver"
>>>>>>>>>>>>>> huhti 17 09:01:49 MinistryOfSillyWalk kernel: r8169 0000:02:00.0: PHY version: 0xc2077002
>>>>>>>>>>>>>> huhti 17 09:01:49 MinistryOfSillyWalk kernel: r8169 0000:03:00.0: PHY version: 0xc2077002
>>>>>>>>>>>>>> huhti 17 09:03:29 MinistryOfSillyWalk kernel: r8169 0000:02:00.0: PHY version: 0x1cc912
>>>>>>>>>>>>>> huhti 17 09:03:29 MinistryOfSillyWalk kernel: r8169 0000:03:00.0: PHY version: 0x1cc912
>>>>>>>>>>>>>> huhti 17 09:17:35 MinistryOfSillyWalk kernel: r8169 0000:02:00.0: PHY version: 0x1cc912
>>>>>>>>>>>>>> huhti 17 09:17:35 MinistryOfSillyWalk kernel: r8169 0000:03:00.0: PHY version: 0x1cc912
>>>>>>>>>>>>>> huhti 17 09:24:53 MinistryOfSillyWalk kernel: r8169 0000:02:00.0: PHY version: 0xc1071002
>>>>>>>>>>>>>> huhti 17 09:24:53 MinistryOfSillyWalk kernel: r8169 0000:03:00.0: PHY version: 0xc1071002
>>>>>>>>>>>>>> huhti 17 09:27:59 MinistryOfSillyWalk kernel: r8169 0000:02:00.0: PHY version: 0x1cc912
>>>>>>>>>>>>>> huhti 17 09:27:59 MinistryOfSillyWalk kernel: r8169 0000:03:00.0: PHY version: 0x1cc912
>>>>>>>>>>>>>> huhti 17 10:08:42 MinistryOfSillyWalk kernel: r8169 0000:02:00.0: PHY version: 0xc1071002
>>>>>>>>>>>>>> huhti 17 10:08:42 MinistryOfSillyWalk kernel: r8169 0000:03:00.0: PHY version: 0xc1071002
>>>>>>>>>>>>>> huhti 17 10:12:07 MinistryOfSillyWalk kernel: r8169 0000:02:00.0: PHY version: 0x1cc912
>>>>>>>>>>>>>> huhti 17 10:12:07 MinistryOfSillyWalk kernel: r8169 0000:03:00.0: PHY version: 0x1cc912
>>>>>>>>>>>>>> huhti 17 10:20:35 MinistryOfSillyWalk kernel: r8169 0000:02:00.0: PHY version: 0xc1071002
>>>>>>>>>>>>>> huhti 17 10:20:35 MinistryOfSillyWalk kernel: r8169 0000:03:00.0: PHY version: 0xc1071002
>>>>>>>>>>>>>> huhti 17 10:23:46 MinistryOfSillyWalk kernel: r8169 0000:02:00.0: PHY version: 0x1cc912
>>>>>>>>>>>>>> huhti 17 10:23:46 MinistryOfSillyWalk kernel: r8169 0000:03:00.0: PHY version: 0x1cc912
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> I dont know are those hard coded or what, and are they device specific how much.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> i haven't coldbooted things up, that may be that something to check do they vary how per coldboot.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> I check the ID, and revert all other changes, and check how it is working after adding the PHY id to list.
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>> What i've now learned: the patch + script + journald services -> Results working network, but it is still a workaround.
>>>>>>>>>>>>>
>>>>>>>>>>>> Following patch trusts the MAC version, another thing witch could help is to derive method to do 2dn pass of the probeing:
>>>>>>>>>>>>
>>>>>>>>>>>> if specific MAC version is found.
>>>>>>>>>>>>
>>>>>>>>>>>> diff --git a/drivers/net/ethernet/realtek/r8169_main.c b/drivers/net/ethernet/realtek/r8169_main.c
>>>>>>>>>>>> index acd122a88d4a..62b37a1abc24 100644
>>>>>>>>>>>> --- a/drivers/net/ethernet/realtek/r8169_main.c
>>>>>>>>>>>> +++ b/drivers/net/ethernet/realtek/r8169_main.c
>>>>>>>>>>>> @@ -5172,13 +5172,18 @@ static int r8169_mdio_register(struct rtl8169_private *tp)
>>>>>>>>>>>> if (!tp->phydev) {
>>>>>>>>>>>> mdiobus_unregister(new_bus);
>>>>>>>>>>>> return -ENODEV;
>>>>>>>>>>>> - } else if (tp->mac_version == RTL_GIGA_MAC_NONE) {
>>>>>>>>>>>> - /* Most chip versions fail with the genphy driver.
>>>>>>>>>>>> - * Therefore ensure that the dedicated PHY driver is loaded.
>>>>>>>>>>>> - */
>>>>>>>>>>>> - dev_err(&pdev->dev, "Not known MAC version.\n");
>>>>>>>>>>>> - mdiobus_unregister(new_bus);
>>>>>>>>>>>> - return -EUNATCH;
>>>>>>>>>>>> + } else {
>>>>>>>>>>>> + dev_info(&pdev->dev, "PHY version: 0x%x\n", tp->phydev->phy_id);
>>>>>>>>>>>> + dev_info(&pdev->dev, "MAC version: %d\n", tp->mac_version);
>>>>>>>>>>>> +
>>>>>>>>>>>> + if (tp->mac_version == RTL_GIGA_MAC_NONE) {
>>>>>>>>>>>> + /* Most chip versions fail with the genphy driver.
>>>>>>>>>>>> + * Therefore ensure that the dedicated PHY driver is loaded.
>>>>>>>>>>>> + */
>>>>>>>>>>>> + dev_err(&pdev->dev, "Not known MAC/PHY version.\n", tp->phydev->phy_id);
>>>>>>>>>>>> + mdiobus_unregister(new_bus);
>>>>>>>>>>>> + return -EUNATCH;
>>>>>>>>>>>> + }
>>>>>>>>>>>> }
>>>>>>>>>>>>
>>>>>>>>>>>> /* PHY will be woken up in rtl_open() */
>>>>>>>>>>>>
>>>>>>>>>>> I just got bleeding edge 5.7.0-1 kernel compiled + firmware's updated.. and now up'n'running. There is one (WARN_ONCE) stack trace coming from driver, i think i tinker with it next, with above patch the network devices shows up and they can be configured.
>>>>>>>>>>>
>>>>>>>>>> I tought to ask first, before going to make new probe_type for errorneus hw (propetype + retry counter) to do re-probe if requested, N times. Or should the r8169_main.c return deferred probe on error on some MAC enums ? Which approach is design-wise sound ?
>>>>>>>>>>
>>>>>>>>>> I just tought that the DEFERRED probe may just do the trick i'm looking ways to implement the re-probeing... hmm. I try the deferred thing and check would that help.
>>>>>>>>>>
>>>>>>>>> Playing with options to work around the issue is of course a great way to
>>>>>>>>> learn about the kernel. However it's questionable whether a workaround in
>>>>>>>>> the driver is acceptable for dealing with the broken BIOS of exactly one
>>>>>>>>>> 10 yrs old board (for which even a userspace workaround exists).
>>>>>>>> problem recognized: libphy-module get's unloaded for some reason before r8169 driver loads -> missing lowlevel functionality -> not working driver. This only occurs at 1st load of module.. seeking solution.
>>>>>>>>
>>>>>>>>
>>>>>>>> There is [last unloaded: libphy] entries in log BEFORE r8169 is probed first time.
>>>>>>>>
>>>>>>>>
>>>>>>>> Any clue what is responsible for unloading to occur ?
>>>>>>>>
>>>>>>>>
>>>>>>> Right now I'm debugging what is the reason, behind that the module starts to work properly only when
>>>>>>>
>>>>>>> unload & reload cycle is done.
>>>>>>>
>>>>>>>
>>>>>>> The libphy is listed as loaded, but the check for low level read/write function is not set -> r8169 modules rlt_open() fails.
>>>>>>>
>>>>>>> See here:
>>>>>>>
>>>>>>> touko 02 20:40:04 MinistryOfSillyWalk kernel: ------------[ cut here ]------------
>>>>>>> touko 02 20:40:04 MinistryOfSillyWalk kernel: read_page callback not available, PHY driver not loaded?
>>>>>>> touko 02 20:40:04 MinistryOfSillyWalk kernel: WARNING: CPU: 3 PID: 787 at drivers/net/phy/phy-core.c:750 phy_save_page+0xb1/0xe3 [libph
>>>>>>> y]
>>>>>>> touko 02 20:40:04 MinistryOfSillyWalk kernel: Modules linked in: cmac algif_hash algif_skcipher af_alg bnep btusb btrtl btbcm btintel b
>>>>>>> luetooth ecdh_generic rfkill ecc uvcvideo videobuf2_vmalloc videobuf2_memops snd_usb_audio videobuf2_v4l2 videobuf2_common snd_usbmidi_
>>>>>>> lib videodev snd_rawmidi snd_seq_device mc input_leds joydev mousedev squashfs loop amdgpu snd_hda_codec_realtek gpu_sched i2c_algo_bit
>>>>>>> ttm snd_hda_codec_generic drm_kms_helper edac_mce_amd ledtrig_audio cec rc_core kvm_amd drm ccp snd_hda_codec_hdmi agpgart rng_core kv
>>>>>>> m snd_hda_intel syscopyarea sysfillrect ppdev sysimgblt snd_intel_dspcfg fb_sys_fops snd_hda_codec snd_hda_core snd_hwdep irqbypass wmi
>>>>>>> _bmof snd_pcm snd_timer snd evdev pcspkr soundcore parport_pc parport sp5100_tco mac_hid i2c_piix4 k10temp acpi_cpufreq uinput crypto_u
>>>>>>> ser ip_tables x_tables hid_generic usbhid hid ohci_pci virtio_net net_failover failover firewire_ohci firewire_core crc_itu_t pata_atii
>>>>>>> xp ehci_pci ehci_hcd sr_mod cdrom ohci_hcd ata_generic pata_acpi pata_jmicron wmi floppy
>>>>>>> touko 02 20:40:04 MinistryOfSillyWalk kernel: r8169 realtek libphy
>>>>>>> touko 02 20:40:04 MinistryOfSillyWalk kernel: CPU: 3 PID: 787 Comm: NetworkManager Not tainted 5.7.0-1-raw #12
>>>>>>> touko 02 20:40:04 MinistryOfSillyWalk kernel: Hardware name: Gigabyte Technology Co., Ltd. GA-MA790FXT-UD5P/GA-MA790FXT-UD5P, BIOS F8l 07/15/2010
>>>>>>> touko 02 20:40:04 MinistryOfSillyWalk kernel: RIP: 0010:phy_save_page+0xb1/0xe3 [libphy]
>>>>>>> touko 02 20:40:04 MinistryOfSillyWalk kernel: Code: c8 82 11 c0 e8 06 28 ff cc 85 db 74 47 48 8b 85 48 03 00 00 48 83 b8 68 01 00 00 00 75 10 48 c7 c7 e8 82 11 c0 e8 a9 dd f7 cc <0f> 0b eb 26 48 c7 c7 52 78 11 c0 e8 99 dd f7 cc 0f 0b 48 8b 85 48
>>>>>>> touko 02 20:40:04 MinistryOfSillyWalk kernel: RSP: 0018:ffff962c408ef370 EFLAGS: 00010282
>>>>>>> touko 02 20:40:04 MinistryOfSillyWalk kernel: RAX: 0000000000000000 RBX: 0000000000000001 RCX: 0000000000000000
>>>>>>> touko 02 20:40:04 MinistryOfSillyWalk kernel: RDX: 0000000000000001 RSI: 0000000000000092 RDI: 00000000ffffffff
>>>>>>> touko 02 20:40:05 MinistryOfSillyWalk kernel: RBP: ffff8b1af3eb8800 R08: 00000000000004b3 R09: 0000000000000004
>>>>>>> touko 02 20:40:05 MinistryOfSillyWalk kernel: R10: 0000000000000000 R11: 0000000000000001 R12: 00000000ffffffa1
>>>>>>> touko 02 20:40:05 MinistryOfSillyWalk kernel: R13: 0000000000000002 R14: 0000000000000002 R15: ffff8b1af3eb8800
>>>>>>> touko 02 20:40:05 MinistryOfSillyWalk kernel: FS: 00007f07be5d4d80(0000) GS:ffff8b1af7cc0000(0000) knlGS:0000000000000000
>>>>>>> touko 02 20:40:05 MinistryOfSillyWalk kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
>>>>>>> touko 02 20:40:05 MinistryOfSillyWalk kernel: CR2: 000055b83aecb008 CR3: 00000002246b0000 CR4: 00000000000006e0
>>>>>>> touko 02 20:40:05 MinistryOfSillyWalk kernel: Call Trace:
>>>>>>> touko 02 20:40:05 MinistryOfSillyWalk kernel: phy_select_page+0x53/0x7a [libphy]
>>>>>>> touko 02 20:40:05 MinistryOfSillyWalk kernel: phy_write_paged+0x5c/0xa0 [libphy]
>>>>>>> touko 02 20:40:05 MinistryOfSillyWalk kernel: rtl8168d_1_hw_phy_config+0x9d/0x210 [r8169]
>>>>>>> touko 02 20:40:05 MinistryOfSillyWalk kernel: rtl8169_init_phy+0x19/0x110 [r8169]
>>>>>>> touko 02 20:40:05 MinistryOfSillyWalk kernel: rtl_open+0x354/0x4d0 [r8169]
>>>>>>> touko 02 20:40:05 MinistryOfSillyWalk kernel: __dev_open+0xe0/0x170
>>>>>>> touko 02 20:40:05 MinistryOfSillyWalk kernel: __dev_change_flags+0x188/0x1e0
>>>>>>> touko 02 20:40:05 MinistryOfSillyWalk kernel: dev_change_flags+0x21/0x60
>>>>>>> touko 02 20:40:05 MinistryOfSillyWalk kernel: do_setlink+0x78a/0xfd0
>>>>>>>
>>>>>>>
>>>>>>> Something does not setup/register properly at first the way it should.
>>>>>>>
>>>>>>>
>>>>>> I think i solved it: realtek (the phy driver) was missing device entry for the PHY ID reported by the NIC to match -> read_page and write_page function pointers should now be set. The generic PHY does not fill
>>>>>>
>>>>>> the driver's functionality to read or write pages. It happens to be so that the drivers for |RTL8211B Gigabit Ethernet seems to work just fine for my NIC's.
>>>>> The analysis is wrong. The incorrect PHY ID is not root cause of the
>>>>> problem, it's caused by a BIOS bug. It's not a valid PHY ID. If you want
>>>>> to do something, then you could try to inject a PHY soft reset before
>>>>> the MII bus is registered. This should be board-specific, e.g. using
>>>>> dmi_check_system().
>>>> Ok, i'll try that approach, thanks for the tip. Hmm, I'll do similar function mapping what the HW init/config function does determine
>>>>
>>>> function to use.
>>>>
>>>>
>>>> I'll get back to you when I got something new developed.
>>>>
>>> Oujeah, now it works OK.. the soft reset was all it needed.
>>>
>>>
>>> Here's the patch:
>>>
>>> From 06c5deacf3ca9f9258431756a41ff0ba1792f1f7 Mon Sep 17 00:00:00 2001
>>> From: Lauri Jakku<lja@....fi>
>>> Date: Thu, 16 Apr 2020 00:38:51 +0300
>>> Subject: [PATCH] NET: r8169 driver identifying improvement.
>>>
>>> Trust device MAC enum + r8169d NIC soft reset
>>> before configuration.
>>>
>>> This commit adds enumeration check and allows
>>> driver to be slow to attach.
>>>
>>> Signed-off-by: Lauri Jakku<lja@....fi>
>>> ---
>>> drivers/net/ethernet/realtek/r8169_main.c | 24 +++--
>>> .../net/ethernet/realtek/r8169_phy_config.c | 80 ++++++++++++++++
>>> drivers/net/phy/phy-core.c | 91 ++++++++++++++++++-
>>> 3 files changed, 182 insertions(+), 13 deletions(-)
>>>
>>> diff --git a/drivers/net/ethernet/realtek/r8169_main.c b/drivers/net/ethernet/realtek/r8169_main.c
>>> index bf5bf05970a2..a85764f6e448 100644
>>> --- a/drivers/net/ethernet/realtek/r8169_main.c
>>> +++ b/drivers/net/ethernet/realtek/r8169_main.c
>>> @@ -640,7 +640,6 @@ MODULE_AUTHOR("Realtek and the Linux r8169 crew<netdev@...r.kernel.org>");
>>> MODULE_DESCRIPTION("RealTek RTL-8169 Gigabit Ethernet driver");
>>> module_param_named(debug, debug.msg_enable, int, 0);
>>> MODULE_PARM_DESC(debug, "Debug verbosity level (0=none, ..., 16=all)");
>>> -MODULE_SOFTDEP("pre: realtek");
>>> MODULE_LICENSE("GPL");
>>> MODULE_FIRMWARE(FIRMWARE_8168D_1);
>>> MODULE_FIRMWARE(FIRMWARE_8168D_2);
>>> @@ -5172,13 +5171,18 @@ static int r8169_mdio_register(struct rtl8169_private *tp)
>>> if (!tp->phydev) {
>>> mdiobus_unregister(new_bus);
>>> return -ENODEV;
>>> - } else if (!tp->phydev->drv) {
>>> - /* Most chip versions fail with the genphy driver.
>>> - * Therefore ensure that the dedicated PHY driver is loaded.
>>> - */
>>> - dev_err(&pdev->dev, "realtek.ko not loaded, maybe it needs to be added to initramfs?\n");
>>> - mdiobus_unregister(new_bus);
>>> - return -EUNATCH;
>>> + } else {
>>> + dev_info(&pdev->dev, "PHY version: 0x%x\n", tp->phydev->phy_id);
>>> + dev_info(&pdev->dev, "MAC version: %d\n", tp->mac_version);
>>> +
>>> + if (tp->mac_version == RTL_GIGA_MAC_NONE) {
>>> + /* Most chip versions fail with the genphy driver.
>>> + * Therefore ensure that the dedicated PHY driver is loaded.
>>> + */
>>> + dev_err(&pdev->dev, "Not known MAC/PHY version.\n");
>>> + mdiobus_unregister(new_bus);
>>> + return -EUNATCH;
>>> + }
>>> }
>>>
>>> /* PHY will be woken up in rtl_open() */
>>> @@ -5513,6 +5517,9 @@ static int rtl_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
>>> rtl_chip_infos[chipset].name, dev->dev_addr, xid,
>>> pci_irq_vector(pdev, 0));
>>>
>>> + dev_info(&pdev->dev, "PHY version: 0x%x\n", tp->phydev->phy_id);
>>> + dev_info(&pdev->dev, "MAC version: %d\n", tp->mac_version);
>>> +
>>> if (jumbo_max)
>>> netif_info(tp, probe, dev,
>>> "jumbo features [frames: %d bytes, tx checksumming: %s]\n", @@ -5532,6 +5539,7 @@ static int rtl_init_one(struct pci_dev
>>> *pdev, const struct pci_device_id *ent) return rc; } + static
>>> struct pci_driver rtl8169_pci_driver = { .name =
>>> MODULENAME, .id_table = rtl8169_pci_tbl, diff --git
>>> a/drivers/net/ethernet/realtek/r8169_phy_config.c
>>> b/drivers/net/ethernet/realtek/r8169_phy_config.c index
>>> b73f7d023e99..73d604c7a8a8 100644 ---
>>> a/drivers/net/ethernet/realtek/r8169_phy_config.c +++
>>> b/drivers/net/ethernet/realtek/r8169_phy_config.c @@ -1243,6
>>> +1243,84 @@ static void rtl8125_2_hw_phy_config(struct
>>> rtl8169_private *tp, rtl8125_config_eee_phy(phydev); } +
>>> +static void rtl8168d_hw_phy_pre_config_actions(struct
>>> rtl8169_private *tp, + struct phy_device
>>> *phydev) +{ + /* Reset the PHY before configuration. There is
>>> BIOS bug that gives + * random PHY ID when device is not soft
>>> resetted first. --lja + */ + genphy_soft_reset(phydev); +} +
>>> + + +void r8169_hw_phy_pre_config_actions(struct rtl8169_private
>>> *tp, struct phy_device *phydev, + enum
>>> mac_version ver) +{ + static const rtl_phy_cfg_fct
>>> phy_pre_config_actions[] = { + /* PCI devices. */ +
>>> [RTL_GIGA_MAC_VER_02] = NULL, + [RTL_GIGA_MAC_VER_03] = NULL,
>>> + [RTL_GIGA_MAC_VER_04] = NULL, +
>>> [RTL_GIGA_MAC_VER_05] = NULL, + [RTL_GIGA_MAC_VER_06] = NULL,
>>> + /* PCI-E devices. */ + [RTL_GIGA_MAC_VER_07] = NULL,
>>> + [RTL_GIGA_MAC_VER_08] = NULL, +
>>> [RTL_GIGA_MAC_VER_09] = NULL, + [RTL_GIGA_MAC_VER_10] = NULL,
>>> + [RTL_GIGA_MAC_VER_11] = NULL, +
>>> [RTL_GIGA_MAC_VER_12] = NULL, + [RTL_GIGA_MAC_VER_13] = NULL,
>>> + [RTL_GIGA_MAC_VER_14] = NULL, +
>>> [RTL_GIGA_MAC_VER_15] = NULL, + [RTL_GIGA_MAC_VER_16] = NULL,
>>> + [RTL_GIGA_MAC_VER_17] = NULL, +
>>> [RTL_GIGA_MAC_VER_18] = NULL, + [RTL_GIGA_MAC_VER_19] = NULL,
>>> + [RTL_GIGA_MAC_VER_20] = NULL, +
>>> [RTL_GIGA_MAC_VER_21] = NULL, + [RTL_GIGA_MAC_VER_22] = NULL,
>>> + [RTL_GIGA_MAC_VER_23] = NULL, +
>>> [RTL_GIGA_MAC_VER_24] = NULL, + [RTL_GIGA_MAC_VER_25] =
>>> rtl8168d_hw_phy_pre_config_actions, + [RTL_GIGA_MAC_VER_26] =
>>> rtl8168d_hw_phy_pre_config_actions, + [RTL_GIGA_MAC_VER_27] =
>>> rtl8168d_hw_phy_pre_config_actions, + [RTL_GIGA_MAC_VER_28] =
>>> rtl8168d_hw_phy_pre_config_actions, + [RTL_GIGA_MAC_VER_29] =
>>> NULL, + [RTL_GIGA_MAC_VER_30] = NULL, +
>>> [RTL_GIGA_MAC_VER_31] = NULL, + [RTL_GIGA_MAC_VER_32] = NULL,
>>> + [RTL_GIGA_MAC_VER_33] = NULL, +
>>> [RTL_GIGA_MAC_VER_34] = NULL, + [RTL_GIGA_MAC_VER_35] = NULL,
>>> + [RTL_GIGA_MAC_VER_36] = NULL, +
>>> [RTL_GIGA_MAC_VER_37] = NULL, + [RTL_GIGA_MAC_VER_38] = NULL,
>>> + [RTL_GIGA_MAC_VER_39] = NULL, +
>>> [RTL_GIGA_MAC_VER_40] = NULL, + [RTL_GIGA_MAC_VER_41] = NULL,
>>> + [RTL_GIGA_MAC_VER_42] = NULL, +
>>> [RTL_GIGA_MAC_VER_43] = NULL, + [RTL_GIGA_MAC_VER_44] = NULL,
>>> + [RTL_GIGA_MAC_VER_45] = NULL, +
>>> [RTL_GIGA_MAC_VER_46] = NULL, + [RTL_GIGA_MAC_VER_47] = NULL,
>>> + [RTL_GIGA_MAC_VER_48] = NULL, +
>>> [RTL_GIGA_MAC_VER_49] = NULL, + [RTL_GIGA_MAC_VER_50] = NULL,
>>> + [RTL_GIGA_MAC_VER_51] = NULL, +
>>> [RTL_GIGA_MAC_VER_52] = NULL, + [RTL_GIGA_MAC_VER_60] = NULL,
>>> + [RTL_GIGA_MAC_VER_61] = NULL, + }; + + if
>>> (phy_pre_config_actions[ver]) +
>>> phy_pre_config_actions[ver](tp, phydev); +} + + void
>>> r8169_hw_phy_config(struct rtl8169_private *tp, struct phy_device
>>> *phydev, enum mac_version ver) { @@ -1303,6 +1381,8
>>> @@ void r8169_hw_phy_config(struct rtl8169_private *tp, struct
>>> phy_device *phydev, [RTL_GIGA_MAC_VER_60] =
>>> rtl8125_1_hw_phy_config, [RTL_GIGA_MAC_VER_61] =
>>> rtl8125_2_hw_phy_config, }; + +
>>> r8169_hw_phy_pre_config_actions(tp, phydev); if
>>> (phy_configs[ver]) phy_configs[ver](tp, phydev); diff --git
>>> a/drivers/net/phy/phy-core.c b/drivers/net/phy/phy-core.c index
>>> 66b8c61ca74c..b170185a1ed1 100644 --- a/drivers/net/phy/phy-core.c
>>> +++ b/drivers/net/phy/phy-core.c @@ -151,6 +151,25 @@ static const
>>> struct phy_setting settings[] = { }; #undef PHY_SETTING +#ifdef
>>> DEBUG +#define R8169_ATTACHED_PRINTK \ + printk("Phy is attached check %s @ %d: %d\n", \
>>> + __FUNC__, __LINE__, is_attached_check);
>>> +
>>> +#else
>>> +#define R8169_ATTACHED_PRINTK
>>> +#endif
>>> +
>>> +#define PHY_NOT_ATTACHED_CHECK \
>>> + { \
>>> + void *attached_dev_ptr = (phydev) ? phydev->attached_dev : NULL; \
>>> + int is_attached_check = (attached_dev_ptr != NULL) && \
>>> + ((phydev) && (phydev->state >= PHY_READY)); \
>>> + R8169_ATTACHED_PRINTK \
>>> + if (! is_attached_check ) return -EOPNOTSUPP; \
>>> + };
>>> +
>>> +
>>> /**
>>> * phy_lookup_setting - lookup a PHY setting
>>> * @speed: speed to match
>>> @@ -457,6 +476,9 @@ int phy_read_mmd(struct phy_device *phydev, int devad, u32 regnum)
>>> {
>>> int ret;
>>>
>>> + /* If not attached, do nothing. */
>>> + PHY_NOT_ATTACHED_CHECK;
>>> +
>>> phy_lock_mdio_bus(phydev);
>>> ret = __phy_read_mmd(phydev, devad, regnum);
>>> phy_unlock_mdio_bus(phydev);
>>> @@ -479,6 +501,9 @@ int __phy_write_mmd(struct phy_device *phydev, int devad, u32 regnum, u16 val)
>>> {
>>> int ret;
>>>
>>> + /* If not attached, do nothing. */
>>> + PHY_NOT_ATTACHED_CHECK;
>>> +
>>> if (regnum > (u16)~0 || devad > 32)
>>> return -EINVAL;
>>>
>>> @@ -518,6 +543,9 @@ int phy_write_mmd(struct phy_device *phydev, int devad, u32 regnum, u16 val)
>>> {
>>> int ret;
>>>
>>> + /* If not attached, do nothing. */
>>> + PHY_NOT_ATTACHED_CHECK;
>>> +
>>> phy_lock_mdio_bus(phydev);
>>> ret = __phy_write_mmd(phydev, devad, regnum, val);
>>> phy_unlock_mdio_bus(phydev);
>>> @@ -543,6 +571,10 @@ int phy_modify_changed(struct phy_device *phydev, u32 regnum, u16 mask, u16 set)
>>> {
>>> int ret;
>>>
>>> + /* If not attached, do nothing. */
>>> + PHY_NOT_ATTACHED_CHECK;
>>> +
>>> +
>>> phy_lock_mdio_bus(phydev);
>>> ret = __phy_modify_changed(phydev, regnum, mask, set);
>>> phy_unlock_mdio_bus(phydev);
>>> @@ -587,6 +619,9 @@ int phy_modify(struct phy_device *phydev, u32 regnum, u16 mask, u16 set)
>>> {
>>> int ret;
>>>
>>> + /* If not attached, do nothing. */
>>> + PHY_NOT_ATTACHED_CHECK;
>>> +
>>> phy_lock_mdio_bus(phydev);
>>> ret = __phy_modify(phydev, regnum, mask, set);
>>> phy_unlock_mdio_bus(phydev);
>>> @@ -613,6 +648,9 @@ int __phy_modify_mmd_changed(struct phy_device *phydev, int devad, u32 regnum,
>>> {
>>> int new, ret;
>>>
>>> + /* If not attached, do nothing. */
>>> + PHY_NOT_ATTACHED_CHECK;
>>> +
>>> ret = __phy_read_mmd(phydev, devad, regnum);
>>> if (ret < 0)
>>> return ret;
>>> @@ -646,6 +684,10 @@ int phy_modify_mmd_changed(struct phy_device *phydev, int devad, u32 regnum,
>>> {
>>> int ret;
>>>
>>> + /* If not attached, do nothing. */
>>> + PHY_NOT_ATTACHED_CHECK;
>>> +
>>> +
>>> phy_lock_mdio_bus(phydev);
>>> ret = __phy_modify_mmd_changed(phydev, devad, regnum, mask, set);
>>> phy_unlock_mdio_bus(phydev);
>>> @@ -671,6 +713,9 @@ int __phy_modify_mmd(struct phy_device *phydev, int devad, u32 regnum,
>>> {
>>> int ret;
>>>
>>> + /* If not attached, do nothing. */
>>> + PHY_NOT_ATTACHED_CHECK;
>>> +
>>> ret = __phy_modify_mmd_changed(phydev, devad, regnum, mask, set);
>>>
>>> return ret < 0 ? ret : 0;
>>> @@ -694,6 +739,9 @@ int phy_modify_mmd(struct phy_device *phydev, int devad, u32 regnum,
>>> {
>>> int ret;
>>>
>>> + /* If not attached, do nothing. */
>>> + PHY_NOT_ATTACHED_CHECK;
>>> +
>>> phy_lock_mdio_bus(phydev);
>>> ret = __phy_modify_mmd(phydev, devad, regnum, mask, set);
>>> phy_unlock_mdio_bus(phydev);
>>> @@ -704,7 +752,11 @@ EXPORT_SYMBOL_GPL(phy_modify_mmd);
>>>
>>> static int __phy_read_page(struct phy_device *phydev)
>>> {
>>> - if (WARN_ONCE(!phydev->drv->read_page, "read_page callback not available, PHY driver not loaded?\n"))
>>> +
>>> + /* If not attached, do nothing. */
>>> + PHY_NOT_ATTACHED_CHECK;
>>> +
>>> + if (WARN(!phydev->drv->read_page, "read_page callback not available, PHY driver not loaded?\n"))
>>> return -EOPNOTSUPP;
>>>
>>> return phydev->drv->read_page(phydev);
>>> @@ -712,12 +764,16 @@ static int __phy_read_page(struct phy_device *phydev)
>>>
>>> static int __phy_write_page(struct phy_device *phydev, int page)
>>> {
>>> - if (WARN_ONCE(!phydev->drv->write_page, "write_page callback not available, PHY driver not loaded?\n"))
>>> + /* If not attached, do nothing. */
>>> + PHY_NOT_ATTACHED_CHECK;
>>> +
>>> + if (WARN(!phydev->drv->write_page, "write_page callback not available, PHY driver not loaded?\n"))
>>> return -EOPNOTSUPP;
>>>
>>> return phydev->drv->write_page(phydev, page);
>>> }
>>>
>>> +
>>> /**
>>> * phy_save_page() - take the bus lock and save the current page
>>> * @phydev: a pointer to a &struct phy_device
>>> @@ -728,7 +784,11 @@ static int __phy_write_page(struct phy_device *phydev, int page)
>>> */
>>> int phy_save_page(struct phy_device *phydev)
>>> {
>>> - phy_lock_mdio_bus(phydev);
>>> + /* If not attached, do nothing. */
>>> + PHY_NOT_ATTACHED_CHECK;
>>> +
>>> +
>>> + phy_lock_mdio_bus(phydev);
>>> return __phy_read_page(phydev);
>>> }
>>> EXPORT_SYMBOL_GPL(phy_save_page);
>>> @@ -748,7 +808,10 @@ int phy_select_page(struct phy_device *phydev, int page)
>>> {
>>> int ret, oldpage;
>>>
>>> - oldpage = ret = phy_save_page(phydev);
>>> + /* If not attached, do nothing. */
>>> + PHY_NOT_ATTACHED_CHECK;
>>> +
>>> + oldpage = ret = phy_save_page(phydev);
>>> if (ret < 0)
>>> return ret;
>>>
>>> @@ -782,6 +845,9 @@ int phy_restore_page(struct phy_device *phydev, int oldpage, int ret)
>>> {
>>> int r;
>>>
>>> + /* If not attached, do nothing. */
>>> + PHY_NOT_ATTACHED_CHECK;
>>> +
>>> if (oldpage >= 0) {
>>> r = __phy_write_page(phydev, oldpage);
>>>
>>> @@ -812,6 +878,9 @@ EXPORT_SYMBOL_GPL(phy_restore_page);
>>> int phy_read_paged(struct phy_device *phydev, int page, u32 regnum)
>>> {
>>> int ret = 0, oldpage;
>>> +
>>> + /* If not attached, do nothing. */
>>> + PHY_NOT_ATTACHED_CHECK;
>>>
>>> oldpage = phy_select_page(phydev, page);
>>> if (oldpage >= 0)
>>> @@ -834,6 +903,10 @@ int phy_write_paged(struct phy_device *phydev, int page, u32 regnum, u16 val)
>>> {
>>> int ret = 0, oldpage;
>>>
>>> + /* If not attached, do nothing. */
>>> + PHY_NOT_ATTACHED_CHECK;
>>> +
>>> +
>>> oldpage = phy_select_page(phydev, page);
>>> if (oldpage >= 0)
>>> ret = __phy_write(phydev, regnum, val);
>>> @@ -856,6 +929,9 @@ int phy_modify_paged_changed(struct phy_device *phydev, int page, u32 regnum,
>>> u16 mask, u16 set)
>>> {
>>> int ret = 0, oldpage;
>>> +
>>> + /* If not attached, do nothing. */
>>> + PHY_NOT_ATTACHED_CHECK;
>>>
>>> oldpage = phy_select_page(phydev, page);
>>> if (oldpage >= 0)
>>> @@ -878,7 +954,12 @@ EXPORT_SYMBOL(phy_modify_paged_changed);
>>> int phy_modify_paged(struct phy_device *phydev, int page, u32 regnum,
>>> u16 mask, u16 set)
>>> {
>>> - int ret = phy_modify_paged_changed(phydev, page, regnum, mask, set);
>>> + int ret = -1;
>>> +
>>> + /* If not attached, do nothing. */
>>> + PHY_NOT_ATTACHED_CHECK;
>>> +
>>> + ret = phy_modify_paged_changed(phydev, page, regnum, mask, set);
>>>
>>> return ret < 0 ? ret : 0;
>>> }
>> here is the polished patch:
>>
>> From 6dd6f2813c543dc728efb8dca796bbbe870bd031 Mon Sep 17 00:00:00 2001
>> From: Lauri Jakku<lja@....fi>
>> Date: Thu, 16 Apr 2020 00:38:51 +0300
>> Subject: [PATCH] NET: r8169 driver identifying improvement.
>>
>> Trust device MAC enum + r8169d NIC soft reset
>> before configuration.
>>
>> This commit adds enumeration check and allows
>> driver to be slow to attach.
>>
>> Signed-off-by: Lauri Jakku<lja@....fi>
>> ---
>> drivers/net/ethernet/realtek/r8169_main.c | 21 +++--
>> .../net/ethernet/realtek/r8169_phy_config.c | 80 +++++++++++++++++++
>> 2 files changed, 93 insertions(+), 8 deletions(-)
>>
>> diff --git a/drivers/net/ethernet/realtek/r8169_main.c b/drivers/net/ethernet/realtek/r8169_main.c
>> index bf5bf05970a2..6828e755a460 100644
>> --- a/drivers/net/ethernet/realtek/r8169_main.c
>> +++ b/drivers/net/ethernet/realtek/r8169_main.c
>> @@ -640,7 +640,6 @@ MODULE_AUTHOR("Realtek and the Linux r8169 crew<netdev@...r.kernel.org>");
>> MODULE_DESCRIPTION("RealTek RTL-8169 Gigabit Ethernet driver");
>> module_param_named(debug, debug.msg_enable, int, 0);
>> MODULE_PARM_DESC(debug, "Debug verbosity level (0=none, ..., 16=all)");
>> -MODULE_SOFTDEP("pre: realtek");
>> MODULE_LICENSE("GPL");
>> MODULE_FIRMWARE(FIRMWARE_8168D_1);
>> MODULE_FIRMWARE(FIRMWARE_8168D_2);
>> @@ -5172,13 +5171,18 @@ static int r8169_mdio_register(struct rtl8169_private *tp)
>> if (!tp->phydev) {
>> mdiobus_unregister(new_bus);
>> return -ENODEV;
>> - } else if (!tp->phydev->drv) {
>> - /* Most chip versions fail with the genphy driver.
>> - * Therefore ensure that the dedicated PHY driver is loaded.
>> - */
>> - dev_err(&pdev->dev, "realtek.ko not loaded, maybe it needs to be added to initramfs?\n");
>> - mdiobus_unregister(new_bus);
>> - return -EUNATCH;
>> + } else {
>> + dev_info(&pdev->dev, "PHY version: 0x%x\n", tp->phydev->phy_id);
>> + dev_info(&pdev->dev, "MAC version: %d\n", tp->mac_version);
>> +
>> + if (tp->mac_version == RTL_GIGA_MAC_NONE) {
>> + /* Most chip versions fail with the genphy driver.
>> + * Therefore ensure that the dedicated PHY driver is loaded.
>> + */
>> + dev_err(&pdev->dev, "Not known MAC/PHY version.\n");
>> + mdiobus_unregister(new_bus);
>> + return -EUNATCH;
>> + }
>> }
>>
>> /* PHY will be woken up in rtl_open() */
>> @@ -5532,6 +5536,7 @@ static int rtl_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
>> return rc;
>> }
>>
>> +
>> static struct pci_driver rtl8169_pci_driver = {
>> .name = MODULENAME,
>> .id_table = rtl8169_pci_tbl,
>> diff --git a/drivers/net/ethernet/realtek/r8169_phy_config.c b/drivers/net/ethernet/realtek/r8169_phy_config.c
>> index b73f7d023e99..f13f68b79a92 100644
>> --- a/drivers/net/ethernet/realtek/r8169_phy_config.c
>> +++ b/drivers/net/ethernet/realtek/r8169_phy_config.c
>> @@ -1243,6 +1243,84 @@ static void rtl8125_2_hw_phy_config(struct rtl8169_private *tp,
>> rtl8125_config_eee_phy(phydev);
>> }
>>
>> +
>> +static void rtl8168d_hw_phy_pre_config_actions(struct rtl8169_private *tp,
>> + struct phy_device *phydev)
>> +{
>> + /* Reset the PHY before configuration. There is BIOS bug that gives
>> + * random PHY ID when device is not soft resetted first. --lja
>> + */
>> + genphy_soft_reset(phydev);
>> +}
>> +
>> +
>> +
>> +void r8169_hw_phy_pre_config_actions(struct rtl8169_private *tp, struct phy_device *phydev,
>> + enum mac_version ver)
>> +{
>> + static const rtl_phy_cfg_fct phy_pre_config_actions[] = {
>> + /* PCI devices. */
>> + [RTL_GIGA_MAC_VER_02] = NULL,
>> + [RTL_GIGA_MAC_VER_03] = NULL,
>> + [RTL_GIGA_MAC_VER_04] = NULL,
>> + [RTL_GIGA_MAC_VER_05] = NULL,
>> + [RTL_GIGA_MAC_VER_06] = NULL,
>> + /* PCI-E devices. */
>> + [RTL_GIGA_MAC_VER_07] = NULL,
>> + [RTL_GIGA_MAC_VER_08] = NULL,
>> + [RTL_GIGA_MAC_VER_09] = NULL,
>> + [RTL_GIGA_MAC_VER_10] = NULL,
>> + [RTL_GIGA_MAC_VER_11] = NULL,
>> + [RTL_GIGA_MAC_VER_12] = NULL,
>> + [RTL_GIGA_MAC_VER_13] = NULL,
>> + [RTL_GIGA_MAC_VER_14] = NULL,
>> + [RTL_GIGA_MAC_VER_15] = NULL,
>> + [RTL_GIGA_MAC_VER_16] = NULL,
>> + [RTL_GIGA_MAC_VER_17] = NULL,
>> + [RTL_GIGA_MAC_VER_18] = NULL,
>> + [RTL_GIGA_MAC_VER_19] = NULL,
>> + [RTL_GIGA_MAC_VER_20] = NULL,
>> + [RTL_GIGA_MAC_VER_21] = NULL,
>> + [RTL_GIGA_MAC_VER_22] = NULL,
>> + [RTL_GIGA_MAC_VER_23] = NULL,
>> + [RTL_GIGA_MAC_VER_24] = NULL,
>> + [RTL_GIGA_MAC_VER_25] = rtl8168d_hw_phy_pre_config_actions,
>> + [RTL_GIGA_MAC_VER_26] = rtl8168d_hw_phy_pre_config_actions,
>> + [RTL_GIGA_MAC_VER_27] = rtl8168d_hw_phy_pre_config_actions,
>> + [RTL_GIGA_MAC_VER_28] = rtl8168d_hw_phy_pre_config_actions,
>> + [RTL_GIGA_MAC_VER_29] = NULL,
>> + [RTL_GIGA_MAC_VER_30] = NULL,
>> + [RTL_GIGA_MAC_VER_31] = NULL,
>> + [RTL_GIGA_MAC_VER_32] = NULL,
>> + [RTL_GIGA_MAC_VER_33] = NULL,
>> + [RTL_GIGA_MAC_VER_34] = NULL,
>> + [RTL_GIGA_MAC_VER_35] = NULL,
>> + [RTL_GIGA_MAC_VER_36] = NULL,
>> + [RTL_GIGA_MAC_VER_37] = NULL,
>> + [RTL_GIGA_MAC_VER_38] = NULL,
>> + [RTL_GIGA_MAC_VER_39] = NULL,
>> + [RTL_GIGA_MAC_VER_40] = NULL,
>> + [RTL_GIGA_MAC_VER_41] = NULL,
>> + [RTL_GIGA_MAC_VER_42] = NULL,
>> + [RTL_GIGA_MAC_VER_43] = NULL,
>> + [RTL_GIGA_MAC_VER_44] = NULL,
>> + [RTL_GIGA_MAC_VER_45] = NULL,
>> + [RTL_GIGA_MAC_VER_46] = NULL,
>> + [RTL_GIGA_MAC_VER_47] = NULL,
>> + [RTL_GIGA_MAC_VER_48] = NULL,
>> + [RTL_GIGA_MAC_VER_49] = NULL,
>> + [RTL_GIGA_MAC_VER_50] = NULL,
>> + [RTL_GIGA_MAC_VER_51] = NULL,
>> + [RTL_GIGA_MAC_VER_52] = NULL,
>> + [RTL_GIGA_MAC_VER_60] = NULL,
>> + [RTL_GIGA_MAC_VER_61] = NULL,
>> + };
>> +
>> + if (phy_pre_config_actions[ver])
>> + phy_pre_config_actions[ver](tp, phydev);
>> +}
>> +
>> +
>> void r8169_hw_phy_config(struct rtl8169_private *tp, struct phy_device *phydev,
>> enum mac_version ver)
>> {
>> @@ -1304,6 +1382,8 @@ void r8169_hw_phy_config(struct rtl8169_private *tp, struct phy_device *phydev,
>> [RTL_GIGA_MAC_VER_61] = rtl8125_2_hw_phy_config,
>> };
>>
>> + r8169_hw_phy_pre_config_actions(tp, phydev, ver);
>> +
>> if (phy_configs[ver])
>> phy_configs[ver](tp, phydev);
>> }
> The PHY ID is checked from devm_mdiobus_register(), you're way too late
> with the soft reset. Also I said if a quirk is needed then it has to be
> board-specific. This is not a problem of the chip version in general.
> What you do in r8169_mdio_register() is simply wrong.
> Last but not least you mix 100 different things in one patch.
Hmm, now i'm suspecting that if(!tp->phydev->drv) is always true with my
HW, the version i've made to check HW existance via MAC is ok..
Phy registering is not done properly, where the drv it gets filled. I do
have all three modules loaded (i've made hard depepency chain via
exported symbols so r8169 has link to Realtek-phy that has link to
libphy.) Everything seems ok, all get's loaded ok, but the IF case is
always true, but mac is read from HW ok.
So, any suggestions how to make r8169 to register with PHY layer?
Powered by blists - more mailing lists