netdev - [net-next v3 7/9] igc: Use netdev log helpers in igc

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Thu, 14 May 2020 21:21:37 -0700
From:   Jeff Kirsher <jeffrey.t.kirsher@...el.com>
To:     davem@...emloft.net
Cc:     Andre Guedes <andre.guedes@...el.com>, netdev@...r.kernel.org,
        nhorman@...hat.com, sassmann@...hat.com,
        Aaron Brown <aaron.f.brown@...el.com>,
        Jeff Kirsher <jeffrey.t.kirsher@...el.com>
Subject: [net-next v3 7/9] igc: Use netdev log helpers in igc_base.c

From: Andre Guedes <andre.guedes@...el.com>

This patch coverts one pr_debug() call to hw_dbg() in order to keep log
output aligned with the rest of the driver. hw_dbg() is actually a macro
defined in igc_hw.h that expands to netdev_dbg().

It also takes this opportunity to remove the '\n' character at the end
of messages since it is automatically added to by netdev_dbg().

Signed-off-by: Andre Guedes <andre.guedes@...el.com>
Tested-by: Aaron Brown <aaron.f.brown@...el.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@...el.com>
---
 drivers/net/ethernet/intel/igc/igc_base.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/intel/igc/igc_base.c b/drivers/net/ethernet/intel/igc/igc_base.c
index f7fb18d8d8f5..cc5a6cf531c7 100644
--- a/drivers/net/ethernet/intel/igc/igc_base.c
+++ b/drivers/net/ethernet/intel/igc/igc_base.c
@@ -26,7 +26,7 @@ static s32 igc_reset_hw_base(struct igc_hw *hw)
 	 */
 	ret_val = igc_disable_pcie_master(hw);
 	if (ret_val)
-		hw_dbg("PCI-E Master disable polling has failed.\n");
+		hw_dbg("PCI-E Master disable polling has failed\n");
 
 	hw_dbg("Masking off all interrupts\n");
 	wr32(IGC_IMC, 0xffffffff);
@@ -177,7 +177,7 @@ static s32 igc_init_phy_params_base(struct igc_hw *hw)
 	 */
 	ret_val = hw->phy.ops.reset(hw);
 	if (ret_val) {
-		hw_dbg("Error resetting the PHY.\n");
+		hw_dbg("Error resetting the PHY\n");
 		goto out;
 	}
 
@@ -367,7 +367,7 @@ void igc_rx_fifo_flush_base(struct igc_hw *hw)
 	}
 
 	if (ms_wait == 10)
-		pr_debug("Queue disable timed out after 10ms\n");
+		hw_dbg("Queue disable timed out after 10ms\n");
 
 	/* Clear RLPML, RCTL.SBP, RFCTL.LEF, and set RCTL.LPE so that all
 	 * incoming packets are rejected.  Set enable and wait 2ms so that
-- 
2.26.2