| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20200517195851.610435-5-andrew@lunn.ch>
Date: Sun, 17 May 2020 21:58:48 +0200
From: Andrew Lunn <andrew@...n.ch>
To: David Miller <davem@...emloft.net>
Cc: netdev <netdev@...r.kernel.org>,
Florian Fainelli <f.fainelli@...il.com>,
Heiner Kallweit <hkallweit1@...il.com>,
Chris Healy <cphealy@...il.com>,
Michal Kubecek <mkubecek@...e.cz>, Andrew Lunn <andrew@...n.ch>
Subject: [PATCH net-next 4/7] net: phy: marvell: Add support for amplitude graph
The Marvell PHYs can measure the amplitude of the returned signal for
a given distance. Implement this option of the cable test
infrastructure.
Signed-off-by: Andrew Lunn <andrew@...n.ch>
---
drivers/net/phy/marvell.c | 227 +++++++++++++++++++++++++++++++++++++-
1 file changed, 226 insertions(+), 1 deletion(-)
diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c
index 4bc7febf9248..e7994f5b506e 100644
--- a/drivers/net/phy/marvell.c
+++ b/drivers/net/phy/marvell.c
@@ -42,6 +42,7 @@
#define MII_MARVELL_FIBER_PAGE 0x01
#define MII_MARVELL_MSCR_PAGE 0x02
#define MII_MARVELL_LED_PAGE 0x03
+#define MII_MARVELL_VCT5_PAGE 0x05
#define MII_MARVELL_MISC_TEST_PAGE 0x06
#define MII_MARVELL_VCT7_PAGE 0x07
#define MII_MARVELL_WOL_PAGE 0x11
@@ -164,6 +165,54 @@
#define MII_88E1510_GEN_CTRL_REG_1_MODE_SGMII 0x1 /* SGMII to copper */
#define MII_88E1510_GEN_CTRL_REG_1_RESET 0x8000 /* Soft reset */
+#define MII_VCT5_TX_RX_MDI0_COUPLING 0x10
+#define MII_VCT5_TX_RX_MDI1_COUPLING 0x11
+#define MII_VCT5_TX_RX_MDI2_COUPLING 0x12
+#define MII_VCT5_TX_RX_MDI3_COUPLING 0x13
+#define MII_VCT5_TX_RX_AMPLITUDE_MASK 0x7f00
+#define MII_VCT5_TX_RX_AMPLITUDE_SHIFT 8
+#define MII_VCT5_TX_RX_COUPLING_POSITIVE_REFLECTION BIT(15)
+
+#define MII_VCT5_CTRL 0x17
+#define MII_VCT5_CTRL_ENABLE BIT(15)
+#define MII_VCT5_CTRL_COMPLETE BIT(14)
+#define MII_VCT5_CTRL_TX_SAME_CHANNEL (0x0 << 11)
+#define MII_VCT5_CTRL_TX0_CHANNEL (0x4 << 11)
+#define MII_VCT5_CTRL_TX1_CHANNEL (0x5 << 11)
+#define MII_VCT5_CTRL_TX2_CHANNEL (0x6 << 11)
+#define MII_VCT5_CTRL_TX3_CHANNEL (0x7 << 11)
+#define MII_VCT5_CTRL_SAMPLES_2 (0x0 << 8)
+#define MII_VCT5_CTRL_SAMPLES_4 (0x1 << 8)
+#define MII_VCT5_CTRL_SAMPLES_8 (0x2 << 8)
+#define MII_VCT5_CTRL_SAMPLES_16 (0x3 << 8)
+#define MII_VCT5_CTRL_SAMPLES_32 (0x4 << 8)
+#define MII_VCT5_CTRL_SAMPLES_64 (0x5 << 8)
+#define MII_VCT5_CTRL_SAMPLES_128 (0x6 << 8)
+#define MII_VCT5_CTRL_SAMPLES_DEFAULT (0x6 << 8)
+#define MII_VCT5_CTRL_SAMPLES_256 (0x7 << 8)
+#define MII_VCT5_CTRL_SAMPLES_SHIFT 8
+#define MII_VCT5_CTRL_MODE_MAXIMUM_PEEK (0x0 << 6)
+#define MII_VCT5_CTRL_MODE_FIRST_LAST_PEEK (0x1 << 6)
+#define MII_VCT5_CTRL_MODE_OFFSET (0x2 << 6)
+#define MII_VCT5_CTRL_SAMPLE_POINT (0x3 << 6)
+#define MII_VCT5_CTRL_PEEK_HYST_DEFAULT 3
+
+#define MII_VCT5_SAMPLE_POINT_DISTANCE 0x18
+#define MII_VCT5_TX_PULSE_CTRL 0x1c
+#define MII_VCT5_TX_PULSE_CTRL_DONT_WAIT_LINK_DOWN BIT(12)
+#define MII_VCT5_TX_PULSE_CTRL_PULSE_WIDTH_128nS (0x0 << 10)
+#define MII_VCT5_TX_PULSE_CTRL_PULSE_WIDTH_96nS (0x1 << 10)
+#define MII_VCT5_TX_PULSE_CTRL_PULSE_WIDTH_64nS (0x2 << 10)
+#define MII_VCT5_TX_PULSE_CTRL_PULSE_WIDTH_32nS (0x3 << 10)
+#define MII_VCT5_TX_PULSE_CTRL_PULSE_WIDTH_SHIFT 10
+#define MII_VCT5_TX_PULSE_CTRL_PULSE_AMPLITUDE_1000mV (0x0 << 8)
+#define MII_VCT5_TX_PULSE_CTRL_PULSE_AMPLITUDE_750mV (0x1 << 8)
+#define MII_VCT5_TX_PULSE_CTRL_PULSE_AMPLITUDE_500mV (0x2 << 8)
+#define MII_VCT5_TX_PULSE_CTRL_PULSE_AMPLITUDE_250mV (0x3 << 8)
+#define MII_VCT5_TX_PULSE_CTRL_PULSE_AMPLITUDE_SHIFT 8
+#define MII_VCT5_TX_PULSE_CTRL_MAX_AMP BIT(7)
+#define MII_VCT5_TX_PULSE_CTRL_GT_140m_46_86mV (0x6 << 0)
+
#define MII_VCT7_PAIR_0_DISTANCE 0x10
#define MII_VCT7_PAIR_1_DISTANCE 0x11
#define MII_VCT7_PAIR_2_DISTANCE 0x12
@@ -220,6 +269,7 @@ struct marvell_priv {
u64 stats[ARRAY_SIZE(marvell_hw_stats)];
char *hwmon_name;
struct device *hwmon_dev;
+ bool cable_test_tdr;
};
static int marvell_read_page(struct phy_device *phydev)
@@ -1690,7 +1740,117 @@ static void marvell_get_stats(struct phy_device *phydev,
data[i] = marvell_get_stat(phydev, i);
}
-static int marvell_vct7_cable_test_start(struct phy_device *phydev)
+static int marvell_vct5_wait_complete(struct phy_device *phydev)
+{
+ int i;
+ int val;
+
+ for (i = 0; i < 32; i++) {
+ val = phy_read_paged(phydev, MII_MARVELL_VCT5_PAGE,
+ MII_VCT5_CTRL);
+ if (val < 0)
+ return val;
+
+ if (val & MII_VCT5_CTRL_COMPLETE)
+ return 0;
+
+ usleep_range(1000, 2000);
+ }
+
+ phydev_err(phydev, "Timeout while waiting for cable test to finish\n");
+ return -ETIMEDOUT;
+}
+
+static int marvell_vct5_amplitude(struct phy_device *phydev, int pair)
+{
+ int amplitude;
+ int val;
+ int reg;
+
+ reg = MII_VCT5_TX_RX_MDI0_COUPLING + pair;
+ val = phy_read_paged(phydev, MII_MARVELL_VCT5_PAGE, reg);
+
+ if (val < 0)
+ return 0;
+
+ amplitude = (val & MII_VCT5_TX_RX_AMPLITUDE_MASK) >>
+ MII_VCT5_TX_RX_AMPLITUDE_SHIFT;
+
+ if (!(val & MII_VCT5_TX_RX_COUPLING_POSITIVE_REFLECTION))
+ amplitude = -amplitude;
+
+ return 1000 * amplitude / 128;
+}
+
+static int marvell_vct5_amplitude_distance(struct phy_device *phydev,
+ int meters)
+{
+ int mV_pair0, mV_pair1, mV_pair2, mV_pair3;
+ int distance;
+ u16 reg;
+ int err;
+
+ distance = meters * 1000 / 805;
+
+ err = phy_write_paged(phydev, MII_MARVELL_VCT5_PAGE,
+ MII_VCT5_SAMPLE_POINT_DISTANCE,
+ distance);
+ if (err)
+ return err;
+
+ reg = MII_VCT5_CTRL_ENABLE |
+ MII_VCT5_CTRL_TX_SAME_CHANNEL |
+ MII_VCT5_CTRL_SAMPLES_DEFAULT |
+ MII_VCT5_CTRL_SAMPLE_POINT |
+ MII_VCT5_CTRL_PEEK_HYST_DEFAULT;
+ err = phy_write_paged(phydev, MII_MARVELL_VCT5_PAGE,
+ MII_VCT5_CTRL, reg);
+ if (err)
+ return err;
+
+ err = marvell_vct5_wait_complete(phydev);
+ if (err)
+ return err;
+
+ mV_pair0 = marvell_vct5_amplitude(phydev, 0);
+ mV_pair1 = marvell_vct5_amplitude(phydev, 1);
+ mV_pair2 = marvell_vct5_amplitude(phydev, 2);
+ mV_pair3 = marvell_vct5_amplitude(phydev, 3);
+
+ ethnl_cable_test_amplitude(phydev, ETHTOOL_A_CABLE_PAIR_A, mV_pair0);
+ ethnl_cable_test_amplitude(phydev, ETHTOOL_A_CABLE_PAIR_B, mV_pair1);
+ ethnl_cable_test_amplitude(phydev, ETHTOOL_A_CABLE_PAIR_C, mV_pair2);
+ ethnl_cable_test_amplitude(phydev, ETHTOOL_A_CABLE_PAIR_D, mV_pair3);
+
+ return 0;
+}
+
+static int marvell_vct5_amplitude_graph(struct phy_device *phydev)
+{
+ int meters;
+ int err;
+ u16 reg;
+
+ reg = MII_VCT5_TX_PULSE_CTRL_GT_140m_46_86mV |
+ MII_VCT5_TX_PULSE_CTRL_DONT_WAIT_LINK_DOWN |
+ MII_VCT5_TX_PULSE_CTRL_MAX_AMP |
+ MII_VCT5_TX_PULSE_CTRL_PULSE_WIDTH_32nS;
+
+ err = phy_write_paged(phydev, MII_MARVELL_VCT5_PAGE,
+ MII_VCT5_TX_PULSE_CTRL, reg);
+ if (err)
+ return err;
+
+ for (meters = 0; meters <= 100; meters++) {
+ err = marvell_vct5_amplitude_distance(phydev, meters);
+ if (err)
+ return err;
+ }
+
+ return 0;
+}
+
+static int marvell_cable_test_start_common(struct phy_device *phydev)
{
int bmcr, bmsr, ret;
@@ -1719,12 +1879,66 @@ static int marvell_vct7_cable_test_start(struct phy_device *phydev)
if (bmsr & BMSR_LSTATUS)
msleep(1500);
+ return 0;
+}
+
+static int marvell_vct7_cable_test_start(struct phy_device *phydev)
+{
+ struct marvell_priv *priv = phydev->priv;
+ int ret;
+
+ ret = marvell_cable_test_start_common(phydev);
+ if (ret)
+ return ret;
+
+ priv->cable_test_tdr = false;
+
+ /* Reset the VCT5 API control to defaults, otherwise
+ * VCT7 does not work correctly.
+ */
+ ret = phy_write_paged(phydev, MII_MARVELL_VCT5_PAGE,
+ MII_VCT5_CTRL,
+ MII_VCT5_CTRL_TX_SAME_CHANNEL |
+ MII_VCT5_CTRL_SAMPLES_DEFAULT |
+ MII_VCT5_CTRL_MODE_MAXIMUM_PEEK |
+ MII_VCT5_CTRL_PEEK_HYST_DEFAULT);
+ if (ret)
+ return ret;
+
+ ret = phy_write_paged(phydev, MII_MARVELL_VCT5_PAGE,
+ MII_VCT5_SAMPLE_POINT_DISTANCE, 0);
+ if (ret)
+ return ret;
+
return phy_write_paged(phydev, MII_MARVELL_VCT7_PAGE,
MII_VCT7_CTRL,
MII_VCT7_CTRL_RUN_NOW |
MII_VCT7_CTRL_CENTIMETERS);
}
+static int marvell_vct5_cable_test_tdr_start(struct phy_device *phydev)
+{
+ struct marvell_priv *priv = phydev->priv;
+ int ret;
+
+ /* Disable VCT7 */
+ ret = phy_write_paged(phydev, MII_MARVELL_VCT7_PAGE,
+ MII_VCT7_CTRL, 0);
+ if (ret)
+ return ret;
+
+ ret = marvell_cable_test_start_common(phydev);
+ if (ret)
+ return ret;
+
+ priv->cable_test_tdr = true;
+ ret = ethnl_cable_test_pulse(phydev, 1000);
+ if (ret)
+ return ret;
+
+ return ethnl_cable_test_step(phydev, 0, 100, 1);
+}
+
static int marvell_vct7_distance_to_length(int distance, bool meter)
{
if (meter)
@@ -1828,8 +2042,15 @@ static int marvell_vct7_cable_test_report(struct phy_device *phydev)
static int marvell_vct7_cable_test_get_status(struct phy_device *phydev,
bool *finished)
{
+ struct marvell_priv *priv = phydev->priv;
int ret;
+ if (priv->cable_test_tdr) {
+ ret = marvell_vct5_amplitude_graph(phydev);
+ *finished = true;
+ return ret;
+ }
+
*finished = false;
ret = phy_read_paged(phydev, MII_MARVELL_VCT7_PAGE,
@@ -2563,6 +2784,7 @@ static struct phy_driver marvell_drivers[] = {
.get_tunable = m88e1011_get_tunable,
.set_tunable = m88e1011_set_tunable,
.cable_test_start = marvell_vct7_cable_test_start,
+ .cable_test_tdr_start = marvell_vct5_cable_test_tdr_start,
.cable_test_get_status = marvell_vct7_cable_test_get_status,
},
{
@@ -2588,6 +2810,7 @@ static struct phy_driver marvell_drivers[] = {
.get_tunable = m88e1540_get_tunable,
.set_tunable = m88e1540_set_tunable,
.cable_test_start = marvell_vct7_cable_test_start,
+ .cable_test_tdr_start = marvell_vct5_cable_test_tdr_start,
.cable_test_get_status = marvell_vct7_cable_test_get_status,
},
{
@@ -2613,6 +2836,7 @@ static struct phy_driver marvell_drivers[] = {
.get_tunable = m88e1540_get_tunable,
.set_tunable = m88e1540_set_tunable,
.cable_test_start = marvell_vct7_cable_test_start,
+ .cable_test_tdr_start = marvell_vct5_cable_test_tdr_start,
.cable_test_get_status = marvell_vct7_cable_test_get_status,
},
{
@@ -2658,6 +2882,7 @@ static struct phy_driver marvell_drivers[] = {
.get_tunable = m88e1540_get_tunable,
.set_tunable = m88e1540_set_tunable,
.cable_test_start = marvell_vct7_cable_test_start,
+ .cable_test_tdr_start = marvell_vct5_cable_test_tdr_start,
.cable_test_get_status = marvell_vct7_cable_test_get_status,
},
};
--
2.26.2
Powered by blists - more mailing lists