| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20200518221657.1420070-5-jeffrey.t.kirsher@intel.com>
Date: Mon, 18 May 2020 15:16:52 -0700
From: Jeff Kirsher <jeffrey.t.kirsher@...el.com>
To: davem@...emloft.net
Cc: Andre Guedes <andre.guedes@...el.com>, netdev@...r.kernel.org,
nhorman@...hat.com, sassmann@...hat.com,
Aaron Brown <aaron.f.brown@...el.com>,
Jeff Kirsher <jeffrey.t.kirsher@...el.com>
Subject: [net-next v4 4/9] igc: Use netdev log helpers in igc_ethtool.c
From: Andre Guedes <andre.guedes@...el.com>
In igc_ethtool.c we print log messages using dev_* helpers, generating
inconsistent output with the rest of the driver. Since this is a network
device driver, we should preferably use netdev_* helpers because they
append the interface name to the message, helping making sense the of
the logs.
This patch converts all dev_* calls to netdev_*. It also takes this
opportunity to remove the '\n' character at the end of messages since it
is automatically added by netdev_* log helpers.
Signed-off-by: Andre Guedes <andre.guedes@...el.com>
Tested-by: Aaron Brown <aaron.f.brown@...el.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@...el.com>
---
drivers/net/ethernet/intel/igc/igc_ethtool.c | 41 ++++++++++----------
1 file changed, 21 insertions(+), 20 deletions(-)
diff --git a/drivers/net/ethernet/intel/igc/igc_ethtool.c b/drivers/net/ethernet/intel/igc/igc_ethtool.c
index 9fc250cdf88c..a05d7abee524 100644
--- a/drivers/net/ethernet/intel/igc/igc_ethtool.c
+++ b/drivers/net/ethernet/intel/igc/igc_ethtool.c
@@ -1155,8 +1155,8 @@ static int igc_set_rss_hash_opt(struct igc_adapter *adapter,
if ((flags & UDP_RSS_FLAGS) &&
!(adapter->flags & UDP_RSS_FLAGS))
- dev_err(&adapter->pdev->dev,
- "enabling UDP RSS: fragmented packets may arrive out of order to the stack above\n");
+ netdev_err(adapter->netdev,
+ "Enabling UDP RSS: fragmented packets may arrive out of order to the stack above\n");
adapter->flags = flags;
@@ -1195,7 +1195,8 @@ static int igc_rxnfc_write_etype_filter(struct igc_adapter *adapter,
break;
}
if (i == MAX_ETYPE_FILTER) {
- dev_err(&adapter->pdev->dev, "ethtool -N: etype filters are all used.\n");
+ netdev_err(adapter->netdev,
+ "ethtool -N: etype filters are all used\n");
return -EINVAL;
}
@@ -1236,7 +1237,8 @@ static int igc_rxnfc_write_vlan_prio_filter(struct igc_adapter *adapter,
/* check whether this vlan prio is already set */
if (vlapqf & IGC_VLAPQF_P_VALID(vlan_priority) &&
queue_index != input->action) {
- dev_err(&adapter->pdev->dev, "ethtool rxnfc set vlan prio filter failed.\n");
+ netdev_err(adapter->netdev,
+ "ethtool rxnfc set VLAN prio filter failed\n");
return -EEXIST;
}
@@ -1255,8 +1257,8 @@ int igc_add_filter(struct igc_adapter *adapter, struct igc_nfc_filter *input)
if (hw->mac.type == igc_i225 &&
!(input->filter.match_flags & ~IGC_FILTER_FLAG_SRC_MAC_ADDR)) {
- dev_err(&adapter->pdev->dev,
- "i225 doesn't support flow classification rules specifying only source addresses.\n");
+ netdev_err(adapter->netdev,
+ "i225 doesn't support flow classification rules specifying only source addresses\n");
return -EOPNOTSUPP;
}
@@ -1404,13 +1406,14 @@ static int igc_add_ethtool_nfc_entry(struct igc_adapter *adapter,
*/
if (fsp->ring_cookie == RX_CLS_FLOW_DISC ||
fsp->ring_cookie >= adapter->num_rx_queues) {
- dev_err(&adapter->pdev->dev, "ethtool -N: The specified action is invalid\n");
+ netdev_err(netdev,
+ "ethtool -N: The specified action is invalid\n");
return -EINVAL;
}
/* Don't allow indexes to exist outside of available space */
if (fsp->location >= IGC_MAX_RXNFC_FILTERS) {
- dev_err(&adapter->pdev->dev, "Location out of range\n");
+ netdev_err(netdev, "Location out of range\n");
return -EINVAL;
}
@@ -1458,8 +1461,8 @@ static int igc_add_ethtool_nfc_entry(struct igc_adapter *adapter,
if (!memcmp(&input->filter, &rule->filter,
sizeof(input->filter))) {
err = -EEXIST;
- dev_err(&adapter->pdev->dev,
- "ethtool: this filter is already set\n");
+ netdev_err(netdev,
+ "ethtool: this filter is already set\n");
goto err_out_w_lock;
}
}
@@ -1832,6 +1835,7 @@ static int igc_set_link_ksettings(struct net_device *netdev,
const struct ethtool_link_ksettings *cmd)
{
struct igc_adapter *adapter = netdev_priv(netdev);
+ struct net_device *dev = adapter->netdev;
struct igc_hw *hw = &adapter->hw;
u32 advertising;
@@ -1839,8 +1843,7 @@ static int igc_set_link_ksettings(struct net_device *netdev,
* cannot be changed
*/
if (igc_check_reset_block(hw)) {
- dev_err(&adapter->pdev->dev,
- "Cannot change link characteristics when reset is active.\n");
+ netdev_err(dev, "Cannot change link characteristics when reset is active\n");
return -EINVAL;
}
@@ -1851,7 +1854,7 @@ static int igc_set_link_ksettings(struct net_device *netdev,
if (cmd->base.eth_tp_mdix_ctrl) {
if (cmd->base.eth_tp_mdix_ctrl != ETH_TP_MDI_AUTO &&
cmd->base.autoneg != AUTONEG_ENABLE) {
- dev_err(&adapter->pdev->dev, "forcing MDI/MDI-X state is not supported when link speed and/or duplex are forced\n");
+ netdev_err(dev, "Forcing MDI/MDI-X state is not supported when link speed and/or duplex are forced\n");
return -EINVAL;
}
}
@@ -1868,9 +1871,7 @@ static int igc_set_link_ksettings(struct net_device *netdev,
if (adapter->fc_autoneg)
hw->fc.requested_mode = igc_fc_default;
} else {
- /* calling this overrides forced MDI setting */
- dev_info(&adapter->pdev->dev,
- "Force mode currently not supported\n");
+ netdev_info(dev, "Force mode currently not supported\n");
}
/* MDI-X => 2; MDI => 1; Auto => 3 */
@@ -1904,7 +1905,7 @@ static void igc_diag_test(struct net_device *netdev,
bool if_running = netif_running(netdev);
if (eth_test->flags == ETH_TEST_FL_OFFLINE) {
- netdev_info(adapter->netdev, "offline testing starting");
+ netdev_info(adapter->netdev, "Offline testing starting");
set_bit(__IGC_TESTING, &adapter->state);
/* Link test performed before hardware reset so autoneg doesn't
@@ -1918,13 +1919,13 @@ static void igc_diag_test(struct net_device *netdev,
else
igc_reset(adapter);
- netdev_info(adapter->netdev, "register testing starting");
+ netdev_info(adapter->netdev, "Register testing starting");
if (!igc_reg_test(adapter, &data[TEST_REG]))
eth_test->flags |= ETH_TEST_FL_FAILED;
igc_reset(adapter);
- netdev_info(adapter->netdev, "eeprom testing starting");
+ netdev_info(adapter->netdev, "EEPROM testing starting");
if (!igc_eeprom_test(adapter, &data[TEST_EEP]))
eth_test->flags |= ETH_TEST_FL_FAILED;
@@ -1940,7 +1941,7 @@ static void igc_diag_test(struct net_device *netdev,
if (if_running)
igc_open(netdev);
} else {
- netdev_info(adapter->netdev, "online testing starting");
+ netdev_info(adapter->netdev, "Online testing starting");
/* register, eeprom, intr and loopback tests not run online */
data[TEST_REG] = 0;
--
2.26.2
Powered by blists - more mailing lists