netdev - [PATCH net-next 8/8] MIPS: dts: ocelot: describe the load/save GPIO

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20200527164158.313025-9-antoine.tenart@bootlin.com>
Date:   Wed, 27 May 2020 18:41:58 +0200
From:   Antoine Tenart <antoine.tenart@...tlin.com>
To:     davem@...emloft.net, andrew@...n.ch, f.fainelli@...il.com,
        hkallweit1@...il.com, richardcochran@...il.com,
        alexandre.belloni@...tlin.com, UNGLinuxDriver@...rochip.com
Cc:     netdev@...r.kernel.org, linux-kernel@...r.kernel.org,
        thomas.petazzoni@...tlin.com, allan.nielsen@...rochip.com,
        foss@...il.net, antoine.tenart@...tlin.com
Subject: [PATCH net-next 8/8] MIPS: dts: ocelot: describe the load/save GPIO

From: Quentin Schulz <quentin.schulz@...tlin.com>

This patch adds a description of the load/save GPIN pin, used in the
VSC8584 PHY for timestamping operations. The related pinctrl description
is also added.

Signed-off-by: Quentin Schulz <quentin.schulz@...tlin.com>
Signed-off-by: Antoine Tenart <antoine.tenart@...tlin.com>
---
 arch/mips/boot/dts/mscc/ocelot_pcb120.dts | 12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)

diff --git a/arch/mips/boot/dts/mscc/ocelot_pcb120.dts b/arch/mips/boot/dts/mscc/ocelot_pcb120.dts
index 33991fd209f5..897de5025d7f 100644
--- a/arch/mips/boot/dts/mscc/ocelot_pcb120.dts
+++ b/arch/mips/boot/dts/mscc/ocelot_pcb120.dts
@@ -3,6 +3,7 @@
 
 /dts-v1/;
 
+#include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/phy/phy-ocelot-serdes.h>
 #include "ocelot.dtsi"
@@ -25,6 +26,11 @@ phy_int_pins: phy_int_pins {
 		pins = "GPIO_4";
 		function = "gpio";
 	};
+
+	phy_load_save_pins: phy_load_save_pins {
+		pins = "GPIO_10";
+		function = "ptp2";
+	};
 };
 
 &mdio0 {
@@ -34,27 +40,31 @@ &mdio0 {
 &mdio1 {
 	status = "okay";
 	pinctrl-names = "default";
-	pinctrl-0 = <&miim1>, <&phy_int_pins>;
+	pinctrl-0 = <&miim1>, <&phy_int_pins>, <&phy_load_save_pins>;
 
 	phy7: ethernet-phy@0 {
 		reg = <0>;
 		interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-parent = <&gpio>;
+		load-save-gpios = <&gpio 10 GPIO_ACTIVE_HIGH>;
 	};
 	phy6: ethernet-phy@1 {
 		reg = <1>;
 		interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-parent = <&gpio>;
+		load-save-gpios = <&gpio 10 GPIO_ACTIVE_HIGH>;
 	};
 	phy5: ethernet-phy@2 {
 		reg = <2>;
 		interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-parent = <&gpio>;
+		load-save-gpios = <&gpio 10 GPIO_ACTIVE_HIGH>;
 	};
 	phy4: ethernet-phy@3 {
 		reg = <3>;
 		interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-parent = <&gpio>;
+		load-save-gpios = <&gpio 10 GPIO_ACTIVE_HIGH>;
 	};
 };
 
-- 
2.26.2