lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Date:   Wed, 27 May 2020 19:48:03 +0300
From:   Vladimir Oltean <olteanv@...il.com>
To:     davem@...emloft.net
Cc:     andrew@...n.ch, f.fainelli@...il.com, vivien.didelot@...il.com,
        netdev@...r.kernel.org
Subject: [PATCH net] net: dsa: felix: send VLANs on CPU port as egress-tagged

From: Vladimir Oltean <vladimir.oltean@....com>

As explained in other commits before (b9cd75e66895 and 87b0f983f66f),
ocelot switches have a single egress-untagged VLAN per port, and the
driver would deny adding a second one while an egress-untagged VLAN
already exists.

But on the CPU port (where the VLAN configuration is implicit, because
there is no net device for the bridge to control), the DSA core attempts
to add a VLAN using the same flags as were used for the front-panel
port. This would make adding any untagged VLAN fail due to the CPU port
rejecting the configuration:

bridge vlan add dev swp0 vid 100 pvid untagged
[ 1865.854253] mscc_felix 0000:00:00.5: Port already has a native VLAN: 1
[ 1865.860824] mscc_felix 0000:00:00.5: Failed to add VLAN 100 to port 5: -16

(note that port 5 is the CPU port and not the front-panel swp0).

So this hardware will send all VLANs as tagged towards the CPU.

Fixes: 56051948773e ("net: dsa: ocelot: add driver for Felix switch family")
Signed-off-by: Vladimir Oltean <vladimir.oltean@....com>
---
 drivers/net/dsa/ocelot/felix.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/net/dsa/ocelot/felix.c b/drivers/net/dsa/ocelot/felix.c
index a6e272d2110d..66648986e6e3 100644
--- a/drivers/net/dsa/ocelot/felix.c
+++ b/drivers/net/dsa/ocelot/felix.c
@@ -103,13 +103,17 @@ static void felix_vlan_add(struct dsa_switch *ds, int port,
 			   const struct switchdev_obj_port_vlan *vlan)
 {
 	struct ocelot *ocelot = ds->priv;
+	u16 flags = vlan->flags;
 	u16 vid;
 	int err;
 
+	if (dsa_is_cpu_port(ds, port))
+		flags &= ~BRIDGE_VLAN_INFO_UNTAGGED;
+
 	for (vid = vlan->vid_begin; vid <= vlan->vid_end; vid++) {
 		err = ocelot_vlan_add(ocelot, port, vid,
-				      vlan->flags & BRIDGE_VLAN_INFO_PVID,
-				      vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED);
+				      flags & BRIDGE_VLAN_INFO_PVID,
+				      flags & BRIDGE_VLAN_INFO_UNTAGGED);
 		if (err) {
 			dev_err(ds->dev, "Failed to add VLAN %d to port %d: %d\n",
 				vid, port, err);
-- 
2.25.1

Powered by blists - more mailing lists