[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20200529110408.6349-10-steffen.klassert@secunet.com>
Date: Fri, 29 May 2020 13:04:02 +0200
From: Steffen Klassert <steffen.klassert@...unet.com>
To: David Miller <davem@...emloft.net>
CC: Herbert Xu <herbert@...dor.apana.org.au>,
Steffen Klassert <steffen.klassert@...unet.com>,
<netdev@...r.kernel.org>
Subject: [PATCH 09/15] xfrm: call xfrm_output_gso when inner_protocol is set in xfrm_output
From: Xin Long <lucien.xin@...il.com>
An use-after-free crash can be triggered when sending big packets over
vxlan over esp with esp offload enabled:
[] BUG: KASAN: use-after-free in ipv6_gso_pull_exthdrs.part.8+0x32c/0x4e0
[] Call Trace:
[] dump_stack+0x75/0xa0
[] kasan_report+0x37/0x50
[] ipv6_gso_pull_exthdrs.part.8+0x32c/0x4e0
[] ipv6_gso_segment+0x2c8/0x13c0
[] skb_mac_gso_segment+0x1cb/0x420
[] skb_udp_tunnel_segment+0x6b5/0x1c90
[] inet_gso_segment+0x440/0x1380
[] skb_mac_gso_segment+0x1cb/0x420
[] esp4_gso_segment+0xae8/0x1709 [esp4_offload]
[] inet_gso_segment+0x440/0x1380
[] skb_mac_gso_segment+0x1cb/0x420
[] __skb_gso_segment+0x2d7/0x5f0
[] validate_xmit_skb+0x527/0xb10
[] __dev_queue_xmit+0x10f8/0x2320 <---
[] ip_finish_output2+0xa2e/0x1b50
[] ip_output+0x1a8/0x2f0
[] xfrm_output_resume+0x110e/0x15f0
[] __xfrm4_output+0xe1/0x1b0
[] xfrm4_output+0xa0/0x200
[] iptunnel_xmit+0x5a7/0x920
[] vxlan_xmit_one+0x1658/0x37a0 [vxlan]
[] vxlan_xmit+0x5e4/0x3ec8 [vxlan]
[] dev_hard_start_xmit+0x125/0x540
[] __dev_queue_xmit+0x17bd/0x2320 <---
[] ip6_finish_output2+0xb20/0x1b80
[] ip6_output+0x1b3/0x390
[] ip6_xmit+0xb82/0x17e0
[] inet6_csk_xmit+0x225/0x3d0
[] __tcp_transmit_skb+0x1763/0x3520
[] tcp_write_xmit+0xd64/0x5fe0
[] __tcp_push_pending_frames+0x8c/0x320
[] tcp_sendmsg_locked+0x2245/0x3500
[] tcp_sendmsg+0x27/0x40
As on the tx path of vxlan over esp, skb->inner_network_header would be
set on vxlan_xmit() and xfrm4_tunnel_encap_add(), and the later one can
overwrite the former one. It causes skb_udp_tunnel_segment() to use a
wrong skb->inner_network_header, then the issue occurs.
This patch is to fix it by calling xfrm_output_gso() instead when the
inner_protocol is set, in which gso_segment of inner_protocol will be
done first.
While at it, also improve some code around.
Fixes: 7862b4058b9f ("esp: Add gso handlers for esp4 and esp6")
Reported-by: Xiumei Mu <xmu@...hat.com>
Signed-off-by: Xin Long <lucien.xin@...il.com>
Signed-off-by: Steffen Klassert <steffen.klassert@...unet.com>
---
net/xfrm/xfrm_output.c | 12 +++++++-----
1 file changed, 7 insertions(+), 5 deletions(-)
diff --git a/net/xfrm/xfrm_output.c b/net/xfrm/xfrm_output.c
index 2fd3d990d992..69c33cab8f49 100644
--- a/net/xfrm/xfrm_output.c
+++ b/net/xfrm/xfrm_output.c
@@ -583,18 +583,20 @@ int xfrm_output(struct sock *sk, struct sk_buff *skb)
xfrm_state_hold(x);
if (skb_is_gso(skb)) {
- skb_shinfo(skb)->gso_type |= SKB_GSO_ESP;
+ if (skb->inner_protocol)
+ return xfrm_output_gso(net, sk, skb);
- return xfrm_output2(net, sk, skb);
+ skb_shinfo(skb)->gso_type |= SKB_GSO_ESP;
+ goto out;
}
if (x->xso.dev && x->xso.dev->features & NETIF_F_HW_ESP_TX_CSUM)
goto out;
+ } else {
+ if (skb_is_gso(skb))
+ return xfrm_output_gso(net, sk, skb);
}
- if (skb_is_gso(skb))
- return xfrm_output_gso(net, sk, skb);
-
if (skb->ip_summed == CHECKSUM_PARTIAL) {
err = skb_checksum_help(skb);
if (err) {
--
2.17.1
Powered by blists - more mailing lists