lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Date:   Fri, 29 May 2020 14:58:26 -0600
From:   Rob Herring <robh@...nel.org>
To:     Dan Murphy <dmurphy@...com>
Cc:     Andrew Lunn <andrew@...n.ch>,
        Florian Fainelli <f.fainelli@...il.com>,
        Heiner Kallweit <hkallweit1@...il.com>,
        David Miller <davem@...emloft.net>,
        netdev <netdev@...r.kernel.org>,
        "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
        devicetree@...r.kernel.org
Subject: Re: [PATCH net-next v4 1/4] dt-bindings: net: Add tx and rx internal delays

On Fri, May 29, 2020 at 1:24 PM Dan Murphy <dmurphy@...com> wrote:
>
> Rob
>
> On 5/29/20 1:25 PM, Rob Herring wrote:
> > On Wed, May 27, 2020 at 11:49:31AM -0500, Dan Murphy wrote:
> >> tx-internal-delays and rx-internal-delays are a common setting for RGMII
> >> capable devices.
> >>
> >> These properties are used when the phy-mode or phy-controller is set to
> >> rgmii-id, rgmii-rxid or rgmii-txid.  These modes indicate to the
> >> controller that the PHY will add the internal delay for the connection.
> >>
> >> Signed-off-by: Dan Murphy <dmurphy@...com>
> >> ---
> >>   .../bindings/net/ethernet-controller.yaml          | 14 ++++++++++++++
> >>   1 file changed, 14 insertions(+)
> >>
> >> diff --git a/Documentation/devicetree/bindings/net/ethernet-controller.yaml b/Documentation/devicetree/bindings/net/ethernet-controller.yaml
> >> index ac471b60ed6a..70702a4ef5e8 100644
> >> --- a/Documentation/devicetree/bindings/net/ethernet-controller.yaml
> >> +++ b/Documentation/devicetree/bindings/net/ethernet-controller.yaml
> >> @@ -143,6 +143,20 @@ properties:
> >>         Specifies the PHY management type. If auto is set and fixed-link
> >>         is not specified, it uses MDIO for management.
> >>
> >> +  rx-internal-delay-ps:
> >> +    $ref: /schemas/types.yaml#definitions/uint32
> >> +    description: |
> >> +      RGMII Receive PHY Clock Delay defined in pico seconds.  This is used for
> >> +      PHY's that have configurable RX internal delays.  This property is only
> >> +      used when the phy-mode or phy-connection-type is rgmii-id or rgmii-rxid.
> > Isn't this a property of the phy (this is the controller schema)? Looks
> > like we have similar properties already and they go in phy nodes. Would
> > be good to have a standard property, but let's be clear where it goes.
> >
> > We need to add '-ps' as a standard unit suffix (in dt-schema) and then a
> > type is not needed here.
>
> This is a PHY specific property.
>
> I will move them.
>
> Dumb question but you can just point me to the manual about how and
> where to add the '-ps' to the dt-schema

Here[1], but looks like I already added it. I'd checked the old kernel
version (property-units.txt) which didn't have it.

Rob

[1] https://github.com/devicetree-org/dt-schema/blob/master/schemas/property-units.yaml#L48

Powered by blists - more mailing lists