netdev - [net-next PATCH 5/5] net: dsa: rtl8366: Use top VLANs for default

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20200602205456.2392024-5-linus.walleij@linaro.org>
Date:   Tue,  2 Jun 2020 22:54:56 +0200
From:   Linus Walleij <linus.walleij@...aro.org>
To:     Andrew Lunn <andrew@...n.ch>,
        Vivien Didelot <vivien.didelot@...il.com>,
        Florian Fainelli <f.fainelli@...il.com>
Cc:     netdev@...r.kernel.org, Linus Walleij <linus.walleij@...aro.org>,
        DENG Qingfang <dqfext@...il.com>
Subject: [net-next PATCH 5/5] net: dsa: rtl8366: Use top VLANs for default

The RTL8366 DSA switches will not work unless we set
up a default VLAN for each port. We are currently using
e.g. VLAN 1..6 for a 5-port switch as default VLANs.

This is not very helpful for users, move it to allocate
the top VLANs for default instead, for example on
RTL8366RB there are 16 VLANs so instead of using
VLAN 1..6 as default use VLAN 10..15 so VLAN 1
thru VLAN 9 is available for users.

Cc: DENG Qingfang <dqfext@...il.com>
Signed-off-by: Linus Walleij <linus.walleij@...aro.org>
---
 drivers/net/dsa/rtl8366.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/dsa/rtl8366.c b/drivers/net/dsa/rtl8366.c
index 7f0691a6da13..4e7562b41598 100644
--- a/drivers/net/dsa/rtl8366.c
+++ b/drivers/net/dsa/rtl8366.c
@@ -260,8 +260,8 @@ static int rtl8366_set_default_vlan_and_pvid(struct realtek_smi *smi,
 	u16 vid;
 	int ret;
 
-	/* This is the reserved default VLAN for this port */
-	vid = port + 1;
+	/* Use the top VLANs for per-port default VLAN */
+	vid = smi->num_vlan_mc - smi->num_ports + port;
 
 	if (port == smi->cpu_port)
 		/* For the CPU port, make all ports members of this
-- 
2.26.2