[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CALW65jZT+_qoAtJx4ABKcWGS2V7CQvhwMGF1=acQZHhzHMzhbg@mail.gmail.com>
Date: Wed, 3 Jun 2020 10:19:37 +0800
From: DENG Qingfang <dqfext@...il.com>
To: Linus Walleij <linus.walleij@...aro.org>
Cc: Andrew Lunn <andrew@...n.ch>,
Vivien Didelot <vivien.didelot@...il.com>,
Florian Fainelli <f.fainelli@...il.com>,
netdev <netdev@...r.kernel.org>
Subject: Re: [net-next PATCH 5/5] net: dsa: rtl8366: Use top VLANs for default
Hi Linus
On Wed, Jun 3, 2020 at 4:55 AM Linus Walleij <linus.walleij@...aro.org> wrote:
>
> The RTL8366 DSA switches will not work unless we set
> up a default VLAN for each port. We are currently using
> e.g. VLAN 1..6 for a 5-port switch as default VLANs.
>
> This is not very helpful for users, move it to allocate
> the top VLANs for default instead, for example on
> RTL8366RB there are 16 VLANs so instead of using
RTL8366RB has full 4K vlan entry but you have to enable it manually.
https://github.com/openwrt/openwrt/blob/e73c61a978c56d41a2cdae4b5a2ca660aec4931b/target/linux/generic/files/drivers/net/phy/rtl8366rb.c#L43
> VLAN 1..6 as default use VLAN 10..15 so VLAN 1
> thru VLAN 9 is available for users.
>
> Cc: DENG Qingfang <dqfext@...il.com>
> Signed-off-by: Linus Walleij <linus.walleij@...aro.org>
> ---
> drivers/net/dsa/rtl8366.c | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/net/dsa/rtl8366.c b/drivers/net/dsa/rtl8366.c
> index 7f0691a6da13..4e7562b41598 100644
> --- a/drivers/net/dsa/rtl8366.c
> +++ b/drivers/net/dsa/rtl8366.c
> @@ -260,8 +260,8 @@ static int rtl8366_set_default_vlan_and_pvid(struct realtek_smi *smi,
> u16 vid;
> int ret;
>
> - /* This is the reserved default VLAN for this port */
> - vid = port + 1;
> + /* Use the top VLANs for per-port default VLAN */
> + vid = smi->num_vlan_mc - smi->num_ports + port;
>
> if (port == smi->cpu_port)
> /* For the CPU port, make all ports members of this
> --
> 2.26.2
>
Powered by blists - more mailing lists